Anritsu MS2690A User manual

Document No.: M-W2856AE-8.0
ANRITSU CORPORATION
MS2690A/MS2691A/MS2692A
Signal Analyzer
Option 020: Vector Signal Generator
Operation Manual
Operation
Eighth Edition
•For safety and warning information, please read this
manual before attempting to use the equipment.
•
Additional safety and warning information is
provided within the MS2690A/MS2691A/MS2692A
Signal Analyzer Operation Manual
(Mainframe
Operation). Please also refer
to this document
before using the equipment.
•
Keep this manual with the equipment.

ii
Safety Symbols
To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the
following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings
of the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu
equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this
manual.
Symbols used in manual
This indicates a very dangerous procedure that could result in serious injury or
death if not performed properly.
This indicates a hazardous procedure that could result in serious injury or death if
not performed properly.
This indicates a hazardous procedure or danger that could result in light-to-severe
injury, or loss related to equipment malfunction, if proper precautions are not taken.
Safety Symbols Used on Equipment and in Manual
The following safety symbols are used inside or on the equipment near operation locations to provide information
about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols
and take the necessary precautions BEFORE using the equipment.
This indicates a prohibited operation. The prohibited operation is indicated
symbolically in or near the barred circle.
This indicates an obligatory safety precaution. The obligatory operation is
indicated symbolically in or near the circle.
This indicates a warning or caution. The contents are indicated symbolically in or
near the triangle.
This indicates a note. The contents are described in the box.
These indicate that the marked part should be recycled.
MS2690A/MS2691A/MS2692A
Signal Analyzer Option 020: Vector Signal Generator
Operation Manual Operation
14 May 2007 (First Edition)
11 July 2014 (Eighth Edition)
Copyright © 2007-2014, ANRITSU CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior written permission of the
publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan
DANGER
WARNING
CAUTION

iii
Equipment Certificate
Anritsu Corporation certifies that this equipment was tested before shipment
using calibrated measuring instruments with direct traceability to public
testing organizations recognized by national research laboratories, including
the National Institute of Advanced Industrial Science and Technology, and
the National Institute of Information and Communications Technology, and
was found to meet the published specifications.
Anritsu Warranty
Anritsu Corporation will repair this equipment free-of-charge if a
malfunction occurs within one year after shipment due to a manufacturing
fault, under the condition that this warranty is void when:
•The fault is outside the scope of the warranty conditions separately
described in the operation manual.
•The fault is due to mishandling, misuse, or unauthorized modification or
repair of the equipment by the customer.
•The fault is due to severe usage clearly exceeding normal usage.
•The fault is due to improper or insufficient maintenance by the customer.
•The fault is due to natural disaster, including fire, wind, flooding,
earthquake, lightning strike, or volcanic ash, etc.
•The fault is due to damage caused by acts of destruction, including civil
disturbance, riot, or war, etc.
•The fault is due to explosion, accident, or breakdown of any other
machinery, facility, or plant, etc.
.•The fault is due to use of non-specified peripheral or applied equipment
or parts, or consumables, etc.
•The fault is due to use of a non-specified power supply or in a
non-specified installation location.
•The fault is due to use in unusual environments(Note).
•The fault is due to activities or ingress of living organisms, such as
insects, spiders, fungus, pollen, or seeds.
In addition, this warranty is valid only for the original equipment purchaser.
It is not transferable if the equipment is resold.
Anritsu Corporation shall assume no liability for injury or financial loss of the
customer due to the use of or a failure to be able to use this equipment.

iv
Note:
For the purpose of this Warranty, "unusual environments" means use:
•In places of direct sunlight
•In dusty places
•Outdoors
•In liquids, such as water, oil, or organic solvents, and medical fluids, or
places where these liquids may adhere
•In salty air or in place chemically active gases (sulfur dioxide, hydrogen
sulfide, chlorine, ammonia, nitrogen dioxide, or hydrogen chloride etc.)
are present
•In places where high-intensity static electric charges or electromagnetic
fields are present
•In places where abnormal power voltages (high or low) or instantaneous
power failures occur
•In places where condensation occurs
•In the presence of lubricating oil mists
•In places at an altitude of more than 2,000 m
•In the presence of frequent vibration or mechanical shock, such as in
cars, ships, or airplanes
Anritsu Corporation Contact
In the event that this equipment malfunctions, contact an Anritsu Service and
Sales office. Contact information can be found on the last page of the
printed version of this manual, and is available in a separate file on the CD
version.

v
Notes On Export Management
This product and its manuals may require an Export License/Approval by
the Government of the product's country of origin for re
-
export from your
country.
Before re
-
exporting the product or manuals, please contact us to confirm
whet
her they are export-controlled items or not.
When you disp
ose of export-
controlled items, the products/manuals need
to be broken/shredded so as not to be unlawfully used for military purpose.
Trademark and Registered Trademark
IQproducer
TM
is a registered trademark of Anritsu Corporation.
Notice
The following actions are strictly prohibited for all of the software installed
in this product or otherwise provided by Anritsu:
1. Copying, except for archival purposes.
2. Transferring to a third party separately from this product.
3. Analyzing the incorpor
ated software including but not limited to
modifying, decompiling, disassembling, and reverse engineering.

vi
CE Conformity Marking
Anritsu affixes the CE Conformity marking on the following product(s) in
accordance with the Council Directive 93/68/EEC to indicate that they
conform to the EMC and LVD directive of the European Union (EU).
CE marking
1. Product Model
Option: MS2690A/MS2691A/MS2692A-020 Vector Signal
Generator
2. Applied Directive and Standards
When the MS2690A/MS2691A/MS2692A-020 Vector Signal Generator
is installed in the MS2690A/MS2691A/MS2692A, the applied directive
and standards of this Option conform to those of the MS2690A/
MS2691A/MS2692A main frame.
PS: About main frame
Please contact Anritsu for the latest information on the main frame
types that MS2690A/MS2691A/MS2692A-020 can be used with.

vii
C-tick Conformity Marking
Anritsu affixes the C-tick marking on the following product(s) in
accordance with the regulation to indicate that they conform to the EMC
framework of Australia/New Zealand.
C-tick marking
1. Product Model
Option: MS2690A/MS2691A/MS2692A-020 Vector Signal
Generator
2. Applied Directive and Standards
When the MS2690A/MS2691A/MS2692A-020 Vector Signal Generator
is installed in the MS2690A/MS2691A/MS2692A, the applied directive
and standards of this Option conform to those of the MS2690A/
MS2691A/MS2692A main frame.
PS: About main frame
Please contact Anritsu for the latest information on the main frame
types that MS2690A/MS2691A/MS2692A-020 can be used with.

viii

I
About This Manual
Composition of Operation Manuals
The operation manuals for the MS2690A/MS2691A/MS2692A Signal
Analyzer are comprised as shown in the figure below.
MS2690A/MS2691A/MS2692A Option 020
Vector Signal Generator Operation Manual (Operation)
MS2690A/MS2691A/MS2692A
Signal Analyzer Operation Manual (Mainframe Operation)
Signal Analyzer Operation Manual (Mainframe Remote Control)
MS2690A/MS2691A/MS2692A Option 020
Vector Signal Generator Operation Manual (Standard Waveform Pattern)
Communication System Supporting IQproducer
TM
Operation Manual
MS2690A/MS2691A/MS2692A Option 020
Vector Signal Generator Operation Manual (IQproducerTM)
MS2690A/MS2691A/MS2692A Option 020
Vector Signal Generator Operation Manual (Remote Control)
Signal Analyzer Operation Manual (Mainframe Operation)
Signal Analyzer Operation Manual (Mainframe Remote Control)
These manuals describe basic operating methods, maintenance
procedures, common functions, and common remote control of the signal
analyzer mainframe.
Vector Signal Generator Operation Manual (Operation)
<This document>
This manual describes functions, operating methods, and so on of the
vector signal generator (option).

II
Vector Signal Generator Operation Manual (Remote Control)
This manual describes remote control of the vector signal generator
(option).
Vector Signal Generator Operation Manual (IQproducerTM)
This manual describes functions, operating methods, and so on of the
IQproducer, which is application software used with the vector signal
generator (option).
Vector Signal Generator Operation Manual (Standard Waveform
Pattern)
This manual describes details on the standard waveform pattern data
used with the vector signal generator (option).
In this document, indicates a panel key.