Conrad Electronic KeyMatic CAC User manual

Version 12/05
Funk-Zugangskontrollsystem
„KeyMatic®CAC“ Seite 3 - 89
Radio controlled access control
system „KeyMatic®CAC“ Page 90 - 176
Contrôle d’accès radio-piloté
„KeyMatic®CAC“ Page 177 - 263
Draadloze toegangscontrole
„KeyMatic®CAC“ Pagina 264 - 350
Best.-Nr. / Item-No. / N° de commande / Bestnr.:
75 30 11 (weiß / white / blanc / wit)
75 30 10 (silber / silver / argent / zilver)

BEDIENUNGSANLEITUNG OPERATING INSTRUCTIONS
NOTICE D´EMPLOI GEBRUIKSAANWIJZING
CONRADIMINTERNEThttp://www.conrad.com
Impressum
Diese Bedienungsanleitung ist eine Publikation der Conrad Electronic GmbH, Klaus-
Conrad-Str. 1, 92240 Hirschau.
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B.
Fotokopie, Mikroverfilmung, oder die Erfassung in elektronischen Datenverarbeitungs-
anlagen, bedürfen der schriftlichen Genehmigung des Herausgebers.
Nachdruck, auch auszugsweise, verboten.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung.
Änderung in Technik und Ausstattung vorbehalten.
©Copyright 2005 by Conrad Electronic GmbH. Printed in Germany.
Imprint
These operating instructions are published by Conrad Electronic GmbH, Klaus-
Conrad-Str. 1, 92240 Hirschau/Germany
No reproduction (including translation) is permitted in whole or part e.g. photocopy,
microfilming or storage in electronic data processing equipment, without the express
written consent of the publisher.
The operating instructions reflect the current technical specifications at time of print.We
reserve the right to change the technical or physical specifications.
© Copyright 2005 by Conrad Electronic GmbH. Printed in Germany.
Note de l´éditeur
Cette notice est une publication de la société Conrad Electronic GmbH, Klaus-Conrad-
Str. 1, 92240 Hirschau/Allemagne.
Tous droits réservés, y compris traduction. Toute reproduction, quel que soit le type,
par exemple photocopies, microfilms ou saisie dans des traitements de texte
electronique est soumise à une autorisation préalable écrite de l‘éditeur.
Impression, même partielle, interdite.
Cette notice est conforme à la règlementation en vigueur lors de l´impression.
Données techniques et conditionnement soumis à modifications sans aucun préalable.
© Copyright 2005 par Conrad Electronic GmbH. Imprimé en Allemagne.
Impressum
Deze gebruiksaanwijzing is een publicatie van Conrad Electronic Ned BV.
Alle rechten, inclusief de vertaling, voorbehouden. Reproducties van welke aard dan
ook, fotokopie, microfilm of opgeslagen in een geautomatiseerd gegevensbestand,
alleen met schriftelijke toestemming van de uitgever.
Nadruk, ook in uittreksel, verboden.
Deze gebruiksaanwijzing voldoet aan de technische eisen bij het ter perse gaan.
Wijzigingen in techniek en uitrusting voorbehouden.
© Copyright 2005 by Conrad Electronic Ned BV. Printed in Germany. *DT0502
100%
Recycling-
Papier.
Chlorfrei
gebleicht.
100%
recycling
paper.
Bleached
without
chlorine.
100%
papier
recyclé.
Blanchi
sans
chlore.
100%
Recycling
Papier.
Chloorvrij
gebleekt.

2
DieseBedienungsanleitunggehörtzudiesemProdukt.SieenthältwichtigeHinwei-
sezurInbetriebnahmeundHandhabung.AchtenSiehierauf,auchwennSiedieses
ProduktanDritteweitergeben.
HebenSiedeshalbdieseBedienungsanleitungzumNachlesenauf!
EineAuflistungder InhaltefindenSie indemInhaltsverzeichnis mitAngabeder entspre-
chendenSeitenzahlenaufSeite4.
These operating instructions belong with this product. They contain important
information for putting it into service and operating it. This should be noted also
when this product is passed on to a third party.
Therefore look after these operating instructions for future reference!
Alistofcontentswiththecorrespondingpagenumberscanbefoundintheindexonpage
90.
Cemoded’emploiappartientàceproduit.Ilcontientdesrecommandationsencequi
concerne sa mise en service et sa manutention. Veuillez en tenir compte et ceci
également lorsque vous remettez le produit à des tiers.
Conservez ce mode d’emploi afin de pouvoir vous documenter en temps utile!
Vous trouverez le récapitulatif des indications du contenu à la table des matières avec
mentiondelapagecorrespondanteàlapage177.
Dezegebruiksaanwijzinghoortbijditproduct.Erstaanbelangrijkeaanwijzingenin
betreffende de ingebruikname en gebruik, ook als u dit product doorgeeft aan
derden.
Bewaar deze handleiding zorgvuldig, zodat u deze later nog eens kunt nalezen!
U vindt een opsomming van de inhoud in de inhoudsopgave met aanduiding van de
paginanummersoppagina264.

90
Introduction
DearCustomer,
thankyouforpurchasingthisproduct.
It is EMV tested and complies with the current European and national stipulations. Its
conformancehasbeenverifiedandthecorrespondingdeclarationsanddocumentsdeposited
withthemanufacturer.
Tomaintainthisconditionandtoensurerisk-freeoperation,everyusermusttakeheedofthepresent
operatinginstructions!
Beforestartingoperation,pleasereadthroughtheseoperatinginstructionscompletelyobservingall
operatingandsafetyinstructions!
Allcompaniesnamedandproductlistingsaretrademarksofthecorrespondingmanufacturer.
All rights are reserved.
If you have any questions, please contact our technical support:
Germany: Tel.no.: +49 9604 / 40 88 80
Fax.no.: +49 9604 / 40 88 48
e-mail: [email protected]
Mon.to Thur. 8.00amto4.30pm
Fri. 8.00amto2.00pm

91
Table of Contents
Page
1. IntendedUse.................................................................................................................... 93
2. Scope of Delivery............................................................................................................ 93
3. Explanationof Symbols ................................................................................................. 93
4. Featuresandfunctions .................................................................................................. 94
5. Safetyinstructions ......................................................................................................... 95
6. Batteryandaccumulatorinformation ........................................................................... 97
7. Description of device and operating parts................................................................... 98
8. Mounting.......................................................................................................................... 99
a) Positioningdevice........................................................................................................ 99
b) Changingkeyscover ................................................................................................... 99
c) Mountingdevice,insertingbatteries .......................................................................... 100
9. Installationoptions ....................................................................................................... 102
a) Batteryoperationandabsoluteradiocontrol.............................................................. 102
ActivatingRadio-gongandFS20radioswitchingdevice ........................................... 102
Activating2Radio-gongs........................................................................................... 102
b) Connectingtoanexistingbellunit ............................................................................. 103
c) Activatingaswitchinputviarelaycontact ................................................................. 105
10. Operation ....................................................................................................................... 106
a) General ...................................................................................................................... 106
b) Openlock .................................................................................................................. 107
c) Closelock .................................................................................................................. 108
d) Errormessage ........................................................................................................... 108
e) Functionkeys ............................................................................................................ 109
f) Time .......................................................................................................................... 109
11. Programming ................................................................................................................. 110
a) Initialoperation,basicsettings,programmingKeyMatic®.......................................... 110
b) Othermenusettings .................................................................................................. 116
1. Menu"User"(initiatingusersettings) .................................................................. 117
Creatingnewuser................................................................................................ 117
Enteringuseraccesscode .................................................................................. 119
Changinguseraccesscode ................................................................................ 120
Deletinguser........................................................................................................ 121
Enteringuseraccesstimes ................................................................................. 123
Option:Access"regular"................................................................................ 125
Option:Access"accordingtodate" ............................................................... 127
Changingusernames.......................................................................................... 128
Cancellingtimer ................................................................................................... 130

92
Page
2. Menu"Keyfunctions" .......................................................................................... 132
Selectingkeystobeprocessed ........................................................................... 133
ProgrammingRadio-gongcontrol ........................................................................ 134
Programmingrelaycontrol ................................................................................... 135
ProgrammingFS20control .................................................................................. 136
Assignactiveperiodoffunctionkeys(timecontrol)............................................. 139
Coding/unlockingfunctionkeys ........................................................................... 140
Coding/unlockingengagekey .............................................................................. 141
Programmingreleaseperiod ................................................................................ 142
ProgrammingPartyfunction ................................................................................ 143
3. Menu"Settingclock"............................................................................................ 145
4. Menu"Diallingunit".............................................................................................. 147
Errorentry#...................................................................................................................................................................................... 148
Duresscode ........................................................................................................ 150
5. Menu "Display" ................................................................................................... 152
6. Menu "Lighting" .................................................................................................. 157
12. Basis of FS20 system ................................................................................................... 161
13. Incorporating the "KeyMatic®CAC" into the FS20 address system....................... 163
a) General ...................................................................................................................... 163
b) Allocationoffunctiongroupsandmasteraddresses................................................. 164
c) Exampleofaddressclassification ............................................................................. 165
14.FS20command tables .................................................................................................. 167
a) Transmissionorder.................................................................................................... 167
b) Operationalperiod ..................................................................................................... 168
15.Administratorfunction ................................................................................................. 169
a) TheHistoryfunction .................................................................................................. 169
b) InvokingtheHistoryfunction ..................................................................................... 170
16. Replacingbatteries ....................................................................................................... 171
17. Informationaboutrange .............................................................................................. 172
18. MaintenanceandCleaning .......................................................................................... 173
19. Handling ......................................................................................................................... 174
20. Disposal ......................................................................................................................... 175
a) General ...................................................................................................................... 175
b) Batteriesandaccumulators ....................................................................................... 175
21. Technicaldata ............................................................................................................... 176
22. Declarationofconformity ............................................................................................ 176

93
1. Intended Use
The access control system is designed to release lock combinations via a numerical code. This
systemmust bedriven bythe "KeyMatic®KM300"door-locking device.Thisproductismoreover
suitableforradioorcablecontrolled,doubleswitchchanneloperationofbell(1-2familyhomes)and
lightingsystems,etc.Pleaseadheretotheappropriateinstructionslaidoutinthismanual.
Thisdoesnotincludeoperationforotherapplicationsandwouldinsodoingresultina
lapseoftheguaranteeandanyrelatedliability.Thisisalsothecaseifanyunauthorised
changesoradditionshavebeenmadetotheproduct.Moreover,thisannulstheapproved
(CE)license.
Pleasereadthroughtheentiremanualcarefullybeforeputtingthisproductintooperation.
This operating manual contains guidelines that are vital for correct mounting and
operation.
Beforecommencingwithanyprogrammingpleasereadtheentiresectionunder
thesamename.Familiarizeyourselfwiththestandardmenufunctionsandmake
notes on your planned settings, to ensure a swift continuous execution of the
programmingsteps.
2. Scope of delivery
• KeyMatic®CAC
• Mountingmaterial
• 4Batteries(AA/Mignon)
• 2 covers for keys
• Operatinginstructions
3. Explanation of Symbols
Asymboldepictingalightningstrikeinatriangledrawsattentiontopossibledanger,e.g.
throughanelectricshock
An exclamation mark in a triangle indicates important information in these operating
instructionsthatmustbeobservedwithoutfail.
)The"hand" symbolindicates asectionwith extratips andinformation tohelpyouwith
operation.

94
4. Features and functions
The"KeyMatic®CAC"accesscontrolsystemenablesyoutolock,unlockandevenopendoorsvia
the"KeyMatic®KM300"radiocontrolleddoorlockdrivingsystem,andisactivatedbyenteringacode
number.
Additionallyabellsystemcanbeoperatedfor1-2familyhomeseitherviaawirelinkorradiocontrolled
(usingthe"KM300FG"Radio-gong).
Furthermoreyouhaveaccesstotwoextracontroloutputsthatcouldforexamplebeconnectedtoa
lightingsystem.ControlcanbeachievedagaineitherviaawirelinkorwirelessusingtheFS20radio
switchsystem.
Thissystemhasbeenespeciallymanufacturedtohavethefollowingparticularfeaturesand
designs.
• Locking, unlocking of door locks and the opening of doors via the radio-controlled "KeyMatic®
KM300" door locking system with code entry (secure data transferring and code alterations
system)
• TemporarilyprogrammableParty-function(dooropensforalimitedtimewithoutcodeentry)
• Twofunctionkeysthatcanindividuallybedesignatedtodirectlycontrolanintegratedswitchrelay
(max.load: 1A/30VDC/AC),andareceivercomponentforaFS20-Radioswitchsystemand/or
a"KM300FG"Radiogong
• Individualconfiguration,illuminateddisplay,periodicalorconstantlighting(constantlightingwith
externalmainssupply),programmableswitch-ontime.
• Illuminatedkeypad
• Simpleinstallation,madepossiblebyachoiceofconnections,eitherviathehousesystem(e.g.
adualcablefromtheexistingbell)orifnotviabatteryoperation
• Access for up to 20 users and one administrator, access times can be programmed for each
individualuser(e.g.only6am-6pm)
• Storageanddisplayofuseractivities(History)
• Radiocontrolofoptionalalarmunit„AW50“,programmableforrepeatedentryofawrongcode
i.e.:attemptedforcedentry,orimmediatealarmactivationviaaduresscode(i.e.:aspecialcode
thatopens thedoorwhen oneis forcedtodosoby anintruder, butwhichat thesame timesets
offanalarmmessageviathealarmselectionunit)
• Universalvoltagesupplycaneitherbeviabatteries(4XAA/Mignon,servicelifeupto3years),or
viadirectoralternatingcurrentbetween8Vand12Vplusbatteriesasemergencypowersupply
• IntegratedclockwithcalendarandautomaticWinter/Summertimere-setting

95
5. Safety instructions
Thewarrantywilllapsefordamageduetonon-compliancewiththeseoperating
instructions. We shall not be held liable for any consequential damage or loss!
Weshallnotacceptliabilityfordamagetopropertyorpersonalinjurycausedby
incorrecthandlingornon-compliancewiththesafetyinstructions.Anyclaimto
warranty will lapse in such cases.
Dear Customer, the following safety instructions are intended not only for the
protection of your health but also for the protection of the device. Please read
through the following points carefully:
• Donot usethisproduct inhospitalsormedicalinstitutions.
The product only emits relatively weak radio signals. These radio signals could,
however,leadtomalfunctionsinlife-supportsystems.Thesamemayapplytoother
workingareas.
• The"KeyMatic®CAC"accesscontrolsystemhasbeendesignedforuseininteriors
and protected exterior areas. It complies with an IP 33 protection classification
(protectionagainstforeignobjectsandwaterspray).
Mount this product so that it is protected from direct precipitation (rain/snow) e.g.
underacanopy.Pleasepayparticularattentiontothechapteroutlininginstallation.
• Theauthorisedoperationaltemperaturesare-20°Cto+50°C.
Thedeviceshouldnotbeexposedtodust,vibrations,strongelectricalandmagnetic
fieldsas well asdirect strong sunlight(orother directsourcesof heat).
• Thedevice is nota toy andhas noplacein thehands of children.
• Forsafetyandlicensing(CE)reasons,unauthorisedconversionand/ormodifications
totheproductarenotpermitted.
• Do not leave packaging material lying around carelessly! Plastic foil/bags and
polystyrenepartsetc.canbecomedangerousinthehandsofchildren.
• Handletheproductwith care.Itcanbe damagedthroughimpact,blows orbybeing
droppedevenfromalowheight.
• Pleasadheretotheoperationalvoltage limitationslistedinthetechnicaldata.High
voltagecoulddestroythedeviceandposeahealthhazard(electricshock).

96
• Wheninstallingtheenclosedbellsystem,ensurethatthemainsandlowvoltagecircuit
areseparatedwithatransformerwithgalvanisedwinding(safetybelltransformer).
Ifindoubtallowaprofessionalelectrician tomount, installand wire-upyourdevice.
Improperormake-doelectricalconnectiontothemainsdoesonlyrepresentathreat
toyoubutalso toother persons.
Ourtechnicaladvisorsareavailableforanyfurtherinformation.
• Wire-uptheentiresystemmakingsurethatthemainsandlowvoltagecircuitremain
separatedandcannotcomeintocontactwitheachotherinnormaluseorduetoany
malfunctioning.

97
6. Battery and accumulator information
• Batteriesmust bekept outof thereach ofchildren.
• Makesureyouinsertthebatteries/accumulatorswiththecorrectpolarity.
• Do not leave the batteries lying around in the open; there is a risk of their being swallowed by
childrenordomesticanimals.Ifswallowed,consultadoctorimmediately.
• Leakingordamagedbatteries/accumulatorscancauseburningiftheycomeintocontactwiththe
skin.Forthisreasonyoushouldusesuitableprotectivegloves.
• Makesurethatbatteries/accumulatorsarenotshort-circuitedorthrownintoafire,Thereisarisk
ofexplosion!
• Neverdismantlebatteries/accumulators!
• Batteriesarenotrechargeable.Thereisariskofexplosion!
• In case of longer periods of non-use (e.g. during storage) remove the inserted batteries/
accumulatorstoavoiddamagebyaleakingbattery/accumulator.
• Whenchangingbatteries/accumulatorsalwaystheentiresetandreplaceonlywiththoseofthe
sametype.
• Nevermixbatterieswithaccumulators!
)Pleasenote:
Operationwith accumulators is alsopossible. Due tothe reduced voltagecapacityof
accumulators(accumulator=1.2V,battery=1.5V)thiscouldleadtoareducedoperational
periodofthedevice.Particularlycoldenvironments(e.g.inwinter)alsohaveanegative
effectonthe servicelifeof accumulators.
It is possible that after a short operational period that the display will read "batteries
empty".
Wethereforerecommend:
Ifyoucannotuseanexternalmains supply(8-12V, AC/DCis possible),then ensurea
longerbatterylifebyusingalkalinebatteries.
For an environmentally friendly way of disposing of used batteries please see
chapter20"Disposal".

98
7. Description of device, controls
Display
Keypad
Functionkey2
Functionkey1
Housingrelease
(keyincluded)
Mountingplatewith3screws/rubberseals
and1cablebushing
(includedindelivery)
ConnectingPCB
KL3 KL2
REL2 REL1
8-12VAC/DC
(for DC: any polarity)
¨
Batterycompartment(for4*AA/Mignon)
Attachmentplugfortherecessedconnector
4

99
8. Mounting
a) Site for mounting
Selectasitewhereyourdevicecanbemounted,makingsurethatitmeetsthefollowingrequirements:
• Protectedfromtheeffectsofweathering,e.g.underneathacanopyoreave
• Protectedagainstvandalism(notvisiblefromthestreetbutmountedonpropertygroundsorinan
ante-room)
• Mountwithinthereceptionrangeofthe"KeyMatic®KM300"doorlockdrive(inidealcircumstances
ofan openspacetherangeis upto max.100m, withinabuilding somewhatless dependingon
buildingmaterial)
• If replacing an existing bell key the "KeyMatic®CAC" should be mounted in the same position
(otherwiseextracablelayingworkwillbenecessary)
• Batterypowerallowsyouto beveryflexibleinthechoice ofasiteformounting
Ifthekeypadand/ordisplaymustbeilluminatedatalltimes,thenthedevicemustbeconnected
toanalreadyexistingmainslineorothersourceofvoltage(8-12VAC/DC).Examplesofinstallation
possibilitiesareillustratedonthenextpage.
b) Changing the key covering
)Ifyouintendtoexchangethe"KeyMatic®CAC"bellbuttonforuseina2familyhouseor
severalpersonsinonehouse(e.g.parents/children/grandparentsortwofirms),exchange
thefunctionkeys coveringforthe coveringmarkedwitha 1and2.
• Carefullyremovethefunctionkeyscovering1as
illustratedinthepictureontheright,andusinga
screwdriver(keysarelightlyclickedintoplace).
• Removethefunctionkeyscovering2inthesame
way.
• Then put both of the numbered coverings in
place: firstlybyinsertingtheminthehousingslot
ontheleft,andthenpushdownontherightuntil
itclicks into place.
Thecoveringnumbered2belongstothefunction
keys 2 (upper keys); the covering numbered 1
belongstothefunctionkeys1(lowerkeys).

100
c) Mounting device, inserting batteries
• Loosenthemountingplatewith
the help of the key included
(approx.½turn carefully tothe
left).
Thenremovethemountingplate
from the housing (by pulling
downwards).
• Pull the mains cable from the attaching plug out of the connector
PCB’srecessedconnector,seeillustrationright.
)Donotuseforce,thiscouldotherwiseloosentheflatcable
in its plug fitting.
• Laythemountingplate flatonthemounting surfaceandmarkthe
drillingpointswithapenthroughthethreemountingholes(marked
witha circleinthe pictureopposite).
• Dependingonthenatureofthemountingsurfacedrill3holes(5mm)
anduseraw-plugsifnecessary.
Pay attention when drilling/tightening the screws
that no power, gas or water pipes can be damaged!
Warning! Life hazard caused by an electric shock!
Also take care not to hit any gas or water lines!
• Carryoutthefollowingifyouaremountingwithacableconnection:
1. Turnoffthemainssupplytoanyconnecteddevices,e.g.belltransformerandremovethefuses
forthe stair-lightsandbell unit.
2. Ifyou wantto runa cablefrom belowinto theunit, pokethrough thecable guidinghole.
3. Feedtheappropriatecablethroughthecableguideoralongtherecessinthemountingplate
andattachthecableendsaccordingtothedesiredwiringsystem(seethefollowingchapter)
into thescrew clampsand tighten(for layoutsee chapter7).
4
v

101
• Attachthe mountingplate withthe threeflat headedscrews includedand putthe screwrubber
sealsintoplace.
• Insertfourbatteries(AA/Mignon)inthecorrectpolarityinthebatterycompartment.Lookintothe
batterycompartmentfortheappropriate(plusandminus)markings,seethefollowingillustration.
)Pleasenote:
Stillinsertbatteriesevenifyouareusingan externalpowersource.If thereisapower
cut, the batteries act as a back-up, this ensures that the time functions are not lost or
erased.
• Insertingthebatteriesactivatesthedisplayandthefollowing
isshown:
• Hold the unit as illustrated on the right in front of the
mounting plate, so that the plug connection hangs
downfromthehousing.
• Pushtheplugintoplaceasillustratedintotherecessed
connectoroftheconnectingPCB.
• Positiontheunitcarefullyontothewallmountingbracket
on(1). Slideitdownwards(2)untilitclicksintoplace.
• Lockthehousingintoplacewithaclockwise½turnof
thescrew(includedindelivery).
• Ifyouusinganexternalvoltagesupplyyoucannowturn
iton.
• Themountingprocedureisnowcomplete.
+
–
+
–
¨
1
2
t
v
Herzlich
Willkommen
óóñóó |
+
–
+
–

102
9. Installation variations
The operation can take place wireless i.e.: via radio and battery control and also via a cable
connection.Controllingthe"KeyMatic®KM300"andthe"KM300FG"Radiogongcanbeachieved
inbothcaseswireless,viaradio.
Thefollowingsectionsoutlinevariouskindsofoperationandconnection.Theycanbecombinedwith
theappropriateprogrammingdependingonyourpersonalneedsandproposeduse.
EveryfunctionkeyiscapableofswitchingnotonlytheRadiogong,butalsotheSwitchrelayor/and
aFS20Radioswitchunit.The"KeyMatic®CAC"canalsobeconnectedtoanalreadyinstalledbell
unitinalivingquarter;anextra"KM300FG"Radiogongmustbeusedforasecondlivingquarters.
a) Battery operation and mere radio control
Controlling a Radio gong and FS20 Radio switch unit
FS20radioswitch unit
e.g.forexteriorlighting
Functionkey2
Functionkey1
KeyMaticKM300 KeyMatic®CAC RadiogongKM300FG
Controllingtwo Radio gongs
RadiogongKM300FG
Functionkey2
Functionkey1
KeyMaticKM300 KeyMatic®CAC RadiogongKM300FG

103
b) Integrating an existing bell unit
Bellunitsaregenerallybasedonabasiccircuitsystemusinga2or3wiretechnique,asillustrated
below.
)Dependingonthelayoutofthebuilding,additionalwiringmightbeplannede.g.foradoor
intercom, CTV, or extra lighting for the bell. This does not however influence the full
functionofthe"KeyMatic®CAC".The"KeyMatic®CAC"canbesuppliedfromanexternal
power,whichallowsthekeypad tobelit upatall times.
Simple bell circuit with two wires (standard circuit)
Belltransformer
8-12V~
Doorbell
Bellkeys
Advanced bell circuit with bell keys lighting via three wires.
Belltransformer
8-12V~
Lighting Doorbell
Bellkeys

104
Connecting the standard circuit (example for function key 1)
VariationA: 2-wireswitching, existing bell should continueit’s service
KL2
REL1 Belltransformer
8-12V~ Doorbell
)Theminimum requirementsare as follows:
You must have a bell that when not in use does not start to hum when supplied with a
voltageof100mAaswith the"KeyMatic®CAC".
Electronicringingunits,electronicgongs,etccannotbeutilizedhere.
Whenusingkey1,therelayoptionmust beactivated.
Variation B: 2-wire circuit, existing bell is replaced by the Radio gong
RadiogongKM300FG
8-12V~ Removedoor
bell
)Theminimum requirementsare as follows:
Thedoorbellmustberemoved.
Key1mustbeprogrammedfortheRadiogongoptioninsteadofthe relayoutput.

105
Connecting to the 3-wire circuit (example for function key 1)
KL2
REL1 Belltransformer
8-12V~
Lighting Doorbell
)Theminimum requirementsare as follows:
Insteadofinstallingastandardbell,thiscircuitcanalsotakeelectronicringingsystems
oranelectronicgong.
Whenusingkey1,therelayoptionmust beactivated.
c) Activating a switch input via relay contact
Theexampleillustratediswithfunctionkey2.
Caution!
The "KeyMatic®CAC" relay contact should
only be supplied with a maximum of 1A at a
maximum30VDC/AC!
Applicationexample: Current impulseswitchkeys witha
lowvoltagecurrentimpulseswitchcontroller.Ifanextrawire
connection is available (illustrated as grey line from bell
transformer output to PCB), then a voltage supply is also
possible(donotforgetthegreylink-up).
LN
8-12V~
○○
KL2
REL3

106
10. Operation
)Makesureyouhavefirstcompletedtheprogramming,seechapter11.
a) General
Operatives, general tips and terms
• Opening,lockingandunlockingthedoorviathekeypadshouldbepossible,unlessothersettings
havealreadybeenmade,withthefirstpressofakeyfollowingtherequest foravalidusercode
number.
• Thefunction keys however immediatelyactivate the setoperative, as longas the keysarenot
protectedwitha code.Inthis case,acode entryisrequested attheend oftheoperative.
• Settingsasdescribedinthe"Programming"chaptercanonlybecarriedoutwithanauthorization
(referredtoas "Administrator"in thefollowingtext),which givesyouaccess tothesystem.
Normal User cannot alter these settings, and can only carry out certain user operations as
describedin sectionsb) andc) below.
• Theexecutionofoperatives(User)andprogramming(Administrator)requirestheentryofcertain
codes (the lengths of which can vary between 3 and 12 digits depending on the programming
variables).Theusercanbeidentifiedbythesecodes.
• AprogrammedtimebracketforuseraccessisprogrammableviatheAdministrator(referredto
as"Timer" inthetext below).
• As a rule the bell function will signalise if a new visitor is ringing.
Donotpassyourpersonalcodeontostrangers.Donotallowyourcodetobeoverseen
bystrangerswhileyouareenteringit.Shieldtheentrykeypadwithyourhandorbodyand
looktoseeifanyminicamerashavebeeninstalledwithoutyourawareness.Otherwise
youwillallowfreeentryintoyourprotectedproperty!
Display
• In Stand-bymodethedisplaywillshowthe current timeand awelcomemessage.
Lighting
• Iftheunithasanexternalpowersupply,thekeypadandbothofthefunctionkeysremainlitduring
theprogrammedoperationalperiod.
• Iftheunitisbatterypoweredthekeypadanddisplaylightingwillcomeonafterthefirstpressing
ofoneofthekeys.Thedisplaylightingwillturnitselfoff8secondsafterthelastkeyoperationto
saveonpower.

107
b) Opening the lock
• Pressanynumberkey.
• "Code"appearsinthedisplay.
• Enteryour usercode andthenpress the‘key.
• Thedisplayindicatesthe RadiomastandtheUnlock symbol(¥).
• Thelockdrivewillthenreleasethelock.
)Pleasenote:
Ifyouenterthewrongcodebymistake,thenyoucandeletetheincorrectentrybypressing
the’keyandkeeping itpressedandthenre-enter thecode.
Afterpressingtheunlockkey,othercodedreleasetimeswillbeavailablethatyoucan
programmeunderthe"Releaseperiod"function.Duringthisperiodyourusernamewill
bedisplayedundertheintroductorytext.
Ifyourswitchcommanddoesnotreachthedoorunitdue,forexampletoatransmission
malfunction, you can still try to release the lock without having to re-enter the access
code,aslongasitiswithinthereleaseperiodThereleaseperiodisre-startedwithevery
pushof a key.
Ifnecessaryyoucanimmediatelyendthereleaseperiodsimplybypressingthe ‚
key.
Thisisuseful,ifthelockisclosedandyouwanttopreventanyfurtherpersonfrombeing
abletoopenthelockduringthereleaseperiod.
Special functions:
Openingfunction
• The"Open"functionisoperatedbypressingthe‘keyandopensthelockandreleasesthe
door(thedoorcatchisdrawnin).Theresultingpressureagainstthedoorsealingcausesthedoor
toopen ajar. Ifyou do notwant thisfunction simply setto "Unlock".
Party function
• Thecodelockisreleasedforaprogrammedperiodoftime. Thedoorcanthenbeopened,without
havingtoenter acode,simply bypressingthe‘key.
• The Open symbol (¥) is continuously displayed to indicate that the Party function has been
activated.
Duresscode
• If you for example are being forced to open the door the "KeyMatic®CAC" is backed up with a
compulsorycodefunction(i.e.;aspecialcode!).
• Byenteringthisspecialcode(insteadofthenormalAdmin/Usercode)thedoorwillbeopenedas
normal.Inaddition,howeveranalarmsignalwillbesentbytheoptional"AW50Alarmdiallingunit"
(notincludedwiththe"KeyMaticCAC",availableonrequest)toanoutsidelocationsignallingthem
ofthesituation.