Antari M-11 User manual

M-11
Stage Fog Machine
User Manual
-English
-
中文
© 2023 Antari Lighting and Effects Ltd.

1. Introduction .................................................................................................................................... 1
2. Safety Information .......................................................................................................................... 1
3. Package Items ................................................................................................................................. 4
4. Product Overview ........................................................................................................................... 5
5. Technical Label Information .......................................................................................................... 6
6. Fluid ................................................................................................................................................ 6
7. Setting Up ....................................................................................................................................... 6
8. Operation ........................................................................................................................................ 7
9. Machine Status Message ................................................................................................................ 9
10. DMX Connection ......................................................................................................................... 10
11. RDM Function .............................................................................................................................. 11
12. WTR-20 Wireless Control Operation (Optional) ......................................................................... 12
13. Wireless DMX Operation (Optional) ........................................................................................... 14
14. Two in One Wireless Remote & Wireless DMX (Optional) ........................................................ 15
15. Service and Maintenance .............................................................................................................. 16
16. Technical Specifications ............................................................................................................... 17
17. Machine Dimension ..................................................................................................................... 17
18. Exploded diagram ......................................................................................................................... 18
1. 前言 .............................................................................................................................................. 20
2. 安全注意事項 .............................................................................................................................. 20
3. 包裝內容 ...................................................................................................................................... 23
4. 機器外觀概述 .............................................................................................................................. 23
5. 技術標籤資訊 .............................................................................................................................. 24
6. 液體使用 ...................................................................................................................................... 25
7. 機器安裝操作步驟 ...................................................................................................................... 25
8. 操作說明 ...................................................................................................................................... 25
9. 機器狀態說明 .............................................................................................................................. 27
10. DMX 說明 .................................................................................................................................... 29
11. RDM 說明 .................................................................................................................................... 30
12. WTR-20 無線控制模組配對及操作說明 (選配) ...................................................................... 31
13. 無線 DMX 安裝說明 (選配) ...................................................................................................... 32
14. 二合一無線控制&無線 DMX 模組(選配) ................................................................................. 34
15. 機器維護保養 .............................................................................................................................. 34
16. 技術規格 ...................................................................................................................................... 36
17. 機器尺寸圖 .................................................................................................................................. 36
18. 機台爆炸圖 .................................................................................................................................. 37

1
© 2023Antari Lighting and Effects Ltd. www.antari.com
User Manual
1. Introduction
Please read this user manual carefully before operating the machine.
Please put this manual in a place where you can refer to it at any time.
If you encountered any problems, please contact your local Antari dealer for advice and assistance.
2. Safety Information
CAUTION!
Please read the following safety information carefully before operating the machine.
This information includes important safeguards about installation, usage and
maintenance. Pay attention to all warning labels and instructions in this manual and
printed on the machine.
DANGER!
Electrical shock
Always connect the machine to correct voltage. It will lead to electrical shock or
burned and may cause serious consequences if connecting to incorrect or improper
voltage.
WARNING!
Risk of electrocution
Always connect the machine to a protected circuit and ensure it is properly grounded
to avoid risk of electrocution.
※ Damage caused by the disregard of this user manual are not subject to warranty. Antari and its
dealer will not accept liability for any resulting defects or problems.
2.1 Installation
l Keep this device dry. This machine is not waterproof. Do not expose the machine to water splashes.
l Place the machine on a flat surface. Installed in a well ventilated area. Provide at least 50 cm space

2
© 2023Antari Lighting and Effects Ltd. www.antari.com
around the machine.
l Make sure there are no flammable materials close to the machine while operating. Never add
flammable liquid of any kind to the machine.
l Before connecting the machine to power, always check the voltage indicate on the machine matches
to your local AC voltage. Do not use the machine if AC power voltage does not match.
l If the supply cord is damaged, it must be replaced by a special cord or assembly available from your
local Antari dealer for replacement.
l No user serviceable and modifiable parts inside. Never try to repair this product, an unauthorized
technician may lead the machine to damage or malfunction.
l This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled, disconnect
AC power and clean with a damp cloth. If fluid is spilled onto electronic parts, immediately unplug
the machine and contact your local Antari dealer for advice.
l Only use Antari fluid. Other fluid may lead to heater clog and malfunction.
l Pay attention to all warning labels and instructions on the machine before operation.
2.2 Operation
l Do not operate the machine with bundled power cables. It could be a fire hazard.
l Do not operate the machine in an area with unstable voltage. This may burn out internal components
and cause machine fail to work.
l Do not use the machine against human, animal or flame. Make sure there are no flammable materials
close to the machine.
l For adult use only. The machine is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge. Never leave the
machine running unattended.
l Children being supervised not to play with the machine.
l Area of fog output is very hot. Please keep at least 50 cm distance from the output nozzle during
operating.
l If you hear a strange sound or experience machine fails to work, stop use it immediately. Turn off
and unplug the machine, and contact your local Antari dealer for service.
l Turn off and unplug the machine while it’s not in use.
l Make sure the machine is turned off before unplug it.
l Do not use the machine upside down or tilt it. It may damage the machine and make it malfunction.
l Before transporting the machine, make sure the fluid tank is completely drained.
l Fluid for the machine may present health risks if swallowed. Do not drink fluid. Store it securely. In
case of eye contact or if fluid is swallowed immediately look for medical advice.
l Be sure to unplug the machine before filling fluid.
l If the machine fails to work, unplug the machine and stop operation immediately. Contact your local
Antari dealer for help.

3
© 2023Antari Lighting and Effects Ltd. www.antari.com
2.3 Grounding Instruction
This appliance must be grounded in the event of malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a
cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is
the equipment-grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect
the equipment-grounding conductor to a live terminal. Check with a qualified electrician or servicemen if
the grounding instructions are not completely understood, or if in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120V circuit and has a grounding plug that looks like the plug
illustrated in sketch A in Figure 73.1. A temporary adaptor, which looks like the adaptor illustrated in
sketches B and C, may be used to connect this plug to a 2 pole receptacle as shown in sketch B if a properly
grounded outlet is not available. The temporary adaptor should be used only until a properly grounded
outlet can be installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending
from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adaptor is used, it must be held in place by the metal screw.

4
© 2023Antari Lighting and Effects Ltd. www.antari.com
3. Package Items
Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure that all
parts are present and have been received in good condition. If any parts appear damaged or mishandled
from shipping, notify the shipper immediately and retain the packing material for inspection.
3.1 Standard Package
1 x M-11 Fog Machine
1 x Neutrik TRUE 1 Power Cord
1 x User Manual or scan QR code on technical label
3.2 Optional Accessories
Item Code
Description
WTR-20
Wireless Control Module (W-2 Transmitter & W-2 Receiver)
TIMO-W-DMX-PCBR
Wireless DMX PCB & Wireless DMX Receiver
(supports both CRMX and W-DMX protocols)
TIMO-WTR-70
- W-2 Wireless Transmitter
- 2 in 1 Receiver (W-2 & Wireless DMX Receiver)
- Wireless DMX PCB
(supports both CRMX and W-DMX protocols)

5
© 2023Antari Lighting and Effects Ltd. www.antari.com
4. Product Overview
01. Wireless Receiver
06. Handle
02. XLR 3-Pin & 5-Pin DMX
07. 10-Liter Fluid Tank
03. Neutrik TRUE 1 Power Cord Connector
08. Safety Ring
04. Two in One power & breaker switch
09. Fog Output Nozzle
05. Two rotary knobs (Timer / Volume)

6
© 2023Antari Lighting and Effects Ltd. www.antari.com
5. Technical Label Information
Read the information on the technical label before operation.
Technical label is attached on one side of control panel.
1. Model Name
5. Breaker
2. Input Voltage
6. QR CODE for User Manual
3. Frequency
7. Serial No.
4. Rated Power
6. Fluid
CAUTION!
Always disconnect from the mains before filling the machine. Never add flammable
liquids. If fluid gets inside the machine, please contact your local Antari dealer for
service.
Only use Antari designated fluid for the Antari Fog Machine. The machine is tested and calibrated with
this liquid to get the best output performance. Warranty will be void if any other type of liquid is used,
improper use of liquid may lead to machine failure and malfunction.
7. Setting Up
CAUTION!
Risk of injury caused by falling objects.
Make sure installation location, fastening connecting and rigging hardware can hold
at least 10 times the weight of the machine.
Make sure that the machine is installed securely and cannot fall down.
It will cause severe injuries if the machine falling down.
Step 1. Place the machine on a flat surface and in a suitably large area with at least 50 cm open space

7
© 2023Antari Lighting and Effects Ltd. www.antari.com
around the machine.
Step 2. Fill the fluid tank with Antari approved fluid.
Step 3. Connect the machine to a suitably rated power supply. To determine the power requirement for
the machine, refer to the label on the back of the machine.
Step 4. Turn on the machine, Heat up takes approximately 13 minutes. Once the machine has reached
operating temperature, the LCD display will show “Ready To Fog”. Now the machine is ready
for operation.
Step 5. To start making fog, please press the [VOLUME] knob on the right side of control panel. To stop
making fog, please press the [VOLUME] knob again.
Step 6. To turn off the machine, press the [VOLUME] knob to stop fogging and put the power switch to
the OFF position. If not in use for a while, please have power cord off the machine.
8. Operation
M-11 Fog Machine can be operated in the following modes. The machine can accept 1 kind of signal at 1
time. When using different control modes at the same time, the machine will work according to built-in
control priority:
l Wireless DMX (Optional)
l DMX512
l Wireless Remote (Optional)
l Manual
Please see the following pages for instructions on your choice of operation.
8.1 Control Panel Operation
M-11 fog machine can be operated with the onboard digital control interface.
TIMER VOLUME
HOLD 3SECONDS
Antari M-11
Ready To Fog

8
© 2023Antari Lighting and Effects Ltd. www.antari.com
Operation - Volume Mode
Rotary knob
Action
Description
Right (VOLUME knob)
Press once
Activate / Deactivate volume mode
Right (VOLUME knob)
Rotate
Adjust output volume
Right (VOLUME knob)
Press continuously
Activate 100% fog output
Activate priming fluid
Operation - Timer Mode
Rotary knob
Action
Description
Left (TIMER knob)
Press once
Activate timer mode
Right (VOLUME knob)
Press once
Deactivate timer mode
Right (VOLUME knob)
Rotate
Adjust output volume
Right (VOLUME knob)
Press continuously
Activate 100% fog output
Activate priming fluid
Setting
Rotary knob
Action
Description
Left (TIMER knob)
Press and hold for 3 seconds
Enter setting menu
Left (TIMER knob)
Rotate
Scroll through menus
Left (TIMER knob)
Press
Press once to enter
Left (TIMER knob)
Rotate
Adjust for preferred value
Right (VOLUME knob)
Press once
Return to last page
8.2 Control Menu
Main Menu
Item
Description
DMX
Address
001-512
Channel Mode
1 Channel / 3 Channel
Link Mode
Wired/Wireless
W-DMX
Unlink
Timer
Interval
5 – 200 sec
Duration
1 – 200 sec
Output Level
1 – 100%
Manual
Output Level
1 – 100%

9
© 2023Antari Lighting and Effects Ltd. www.antari.com
Priming
Start / Stop
Heater
On / Off
Information
Software Version
v1.2
Wireless Signal
●: Wireless DMX present
◎: No DMX present
⊙: Link to TX lost
○: Not assigned
Fluid Level
Fine / Empty
Device Hour
XX Hour
Accumulated runing time
Setting
Continuous Output
On / Off
Pump Mode
Single / Dual
Wireless Remote
Pair / Unpair
Fluid Sensor
On / Off
LCD Backlight
Auto Off / Low / Normal
Keypad Sound
On / Off
Auto Start
On / Off
Factory Reset
Proceed
Language
EN / 中文 (Chinese)
Fluid Option
FLG / FLY / FLZ / FLR
9. Machine Status Message
Screen
Description
Antari M-11
v1.2
Software Version
AC Voltage
AC-120V 60Hz
Input Voltage
Antari M-11 PWS
Ready To Fog
Machine is ready to Operate
W: Wireless On
S: Fluid Sensor On
P: Wireless DMX On
Antari M-11 PWS
Heating Off
Heater Off
Manual Output
100%
Fog Output level at Manual Mode
Interval 200 sec
Duration 200 sec
Running at Timer mode, Interval time
Running at Timer mode, Duration time

10
© 2023Antari Lighting and Effects Ltd. www.antari.com
DMX-512
Add: XXX
Current DMX 512 channel
Manual Priming
Priming Fluid
Power off
180 sec
Power Off, countdown 180 sec
Sleeping
Sleeping
Warming Up
10 %
Heating up
Empty Fluid
No fluid. Please refill the fluid tank and then press [VOLUME] knob
continuously to prime fluid from the tank.
Wrong!
Heater Overheat!
Heater is over heat, unable to operate. Please contact your local Antari
dealer for assistance.
Warning!
Temp Error
Heater temperature is abnormal, unable to operate. Please contact your
local Antari dealer for assistance.
If LCD display “Warning”, please stop operating and turn machine off immediately. Please contact your
local Antari dealer for advice and assistance.
10. DMX Connection
10.1 DMX Connector Pin Assignment
The machine provides both 3 and 5-pin XLR connector for DMX connection. The diagram below
indicates pin assignment information.
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
The cap on the DMX IN port is a protection cover. Please remove it with your finger before operation.

11
© 2023Antari Lighting and Effects Ltd. www.antari.com
10.2 DMX Channel Function
1 Channel Mode
DMX Value
Range
Function
Channel 1
Fog Output Level
0 – 4
Off
5 – 255
1 – 100%
3 Channel Mode
DMX Value
Function
Channel 1
Fog Output Level
0 – 4
Off
5-255
1 – 100%
Channel 2
Heater
0-126
Heater Off
127-255
Heater On
Channel 3
Pump
0 – 126
Single
127-255
Dual
11. RDM Function
The M-11 fog machine is RDM enabled, allowing control system to configure, monitor and manage. See
below table for supported RDM parameters.
GET Allowed
SET Allowed
Category
類別
RDM Parameter ID’s (Slot 21-22)
Value
Required
Network
Management
網路管理
DISC_UNIQUE_BRANCH
0x0001
O
DISC_MUTE
0x0002
O
DISC_UN_MUTE
0x0003
O
O
QUEUED_MESSAGE
0x0020

12
© 2023Antari Lighting and Effects Ltd. www.antari.com
O
RDM
Information
RDM 資訊
STATUS_MESSAGES
0x0030
O
SUPPORTED_PARAMETERS
0x0050
O
O
PARAMETER_DESCRIPTION
0x0051
O
O
Product
Information
產品資訊
DEVICE_INFO
0x0060
O
O
PRODUCT_DETAIL_ID_LIST
0x0070
O
DEVICE_MODEL_DESCRIPTION
0x0080
O
MANUFACTURER_LABEL
0x0081
O
O
DEVICE_LABEL
0x0082
O
LANGUAGE_CAPABILITIES
0x00A0
O
O
LANGUAGE
0x00B0
O
SOFTWARE_VERSION_LABEL
0x00C0
O
O
O
DMX512
Setup
DMX512 設
定
DMX_PERSONALITY
0x00E0
O
DMX_PERSONALITY_DESCRIPTION
0x00E1
O
O
DMX_START_ADDRESS
0x00F0
O
O
Sensors
感應器
SENSOR_DEFINITION
0x0200
O
O
SENSOR_VALUE
0x0201
O
Control
控制
DEVICE_HOURS
0x0400
O
O
IDENTIFY_DEVICE
0x1000
O
12. WTR-20 Wireless Control Operation (Optional)
WTR-20 Wireless Control Module (Transmitter & Receiver) is an optional accessory for M-11 Fog
Machine. Please unscrew the receiver’s cover, and then install the W-2 Receiver before registration.

13
© 2023Antari Lighting and Effects Ltd. www.antari.com
12.1 W-2 Wireless Transmitter & Receiver
l Battery：27A 12V
l Effective distance：In a free open space, the effective
distance is about 50 meters, actual usage depends on
obstacle level; the effective distance varies.
l W-2 Wireless remote control system equipped with 4
buttons, each function is:
Button
Function
[A]
Turn on M-11 Fog machine
[B]
Turn off M-11 Fog machine
[C]
Increase fog output
[D]
Decrease fog output
W-2 Wireless Transmitter
W-2 Wireless Receiver
12.2 Registering a Transmitter
l Transmitter can be paired or deleted from the receiver.
l Each receiver can pair up to 5 transmitters.
l Follow below steps to pair or delete transmitter.
Step 1. Press and hold the left rotary (TIMER) knob for 3 seconds to enter setting menu.
Step 2. Rotate the TIMER knob to [Setting] menu.
Step 3. Rotate the TIMER knob to [Wireless Remote]
Step 4A. Press the TIMER knob to show [Pair], please press it again to show [Wait], then please press
[button A] of your W-2 Wireless Transmitter and wait display shows [OK] to complete the pair procedure.
Step 4B. Press the TIMER knob to show [Unpair], please press it again to show [Wait] and then shows
[Unpair] to compete the unpair procedure.
Wireless Remote
Pair
Wireless Remote
< Pair >
Wireless Remote
Wait
Wireless Remote
OK
Wireless Remote
< Unpair >
Wireless Remote
Wait
Wireless Remote
Unpair

14
© 2023Antari Lighting and Effects Ltd. www.antari.com
12.1 WTR-20 Installation
Please unscrew the receiver’s cover, and install the Receiver. Connect it to the wire harness firmly shown
as below photo and then screw it the panel.
13. Wireless DMX Operation (Optional)
The wireless DMX module supports both CRMX and W-DMX protocols
13.1 TIMO-W-DMX-PCBR (Optional)
It includes a Wireless DMX PCB and a Wireless DMX Receiver.
l Wireless DMX Receiver
l Wireless DMX PCB
13.2 Installation Steps
Connect the receiver’s cable with Wireless DMX PCB and then install the W-DMX-PCB onto the main
PCB circled in red below.
Please make sure the Wireless DMX PCB pins are firmly installed attached with M-11 main PCB. If you
encountered any problems, please contact your local Antari dealer for advice and assistance.

15
© 2023Antari Lighting and Effects Ltd. www.antari.com
13.3 Status of Wireless DMX
Signal on LCD display
Wireless DMX status
○
W-DMX present
◎
No DMX present
⊙
Link to TX lost
●
Not assigned
14. Two in One Wireless Remote & Wireless DMX (Optional)
14.1 TIMO-WTR-70 (Optional)
WTR-70 includes a W-2 Wireless Transmitter, a 2 in 1 Receiver and a W-DMX-PCB.
l W-2 Wireless Transmitter
l 2 in 1 Receiver (W-2 & Wireless DMX)
l Wireless DMX PCB (Timo)

16
© 2023Antari Lighting and Effects Ltd. www.antari.com
14.2 Installation Steps
Please refer to 12.3 and 13.2 installation steps. If you encountered any problems, please contact your local
Antari dealer for advice and assistance.
15. Service and Maintenance
DANGER!
Disconnect from mains before starting maintenance operation!
l Do not allow the machine to become contaminated.
l Remove dust from air vents with air compressor, vacuum or a soft brush.
l Only use a damp cloth to clean the casing.
l Please allow machine to cool completely before storing to prevent condensation and potential
malfunction.
l It is recommended to run the machine on a monthly basis in order to achieve best performance and
output condition.
l Excessive dust, liquid and dirt built up will degrade performance and cause overheating.
Breaker Reset
The two in one power switch combines power and breaker
function. Please follow below steps to reset the breaker.
Step 1: Please have the switch to OFF position.
Step 2: Wait 60 seconds.
Step 3: Flip switch to ON position.
If the breaker (switch) still jumps off after reset, please
contact your local Antari dealer for advice and assistance.
Breaker
100-120V = 15A 250V
220-240V = 9A 250V

17
© 2023Antari Lighting and Effects Ltd. www.antari.com
16. Technical Specifications
M-11
Input voltage
US model : AC 100-120V, 50/60Hz 13.3A
EU model : AC 220-240V, 50/60Hz 6.67A
Rated power
1600W
Warming-up Time
13 minutes (approx)
Fluid consumption
400 ml/min (100% output)
Fluid tank capacity
10 Liters (2.64 gallon)
Compatible fluid
Antari FLG Heavy Fog Fluid
Antari FLR Light Fog Fluid
Antari FLH Super Fog Fluid
Antari FLZ Long Hang Time Fog Fluid
Ambient temp/ range
5°C – 40°C (41°F – 104°F)
Control
Manual, Timer,DMX 512,
Wireless (Optioal), Wireless DMX (Optional)
DMX channels
1 or 3 channels
Connection
Neutrik Powercon (Power)
XLR 3pin and 5-pin (DMX)
Optional accessories
WTR-20 Wireless Remote
TIMO-W-DMX-PCBR Wireless DMX
TIMO-WTR-70 Wireless DMX and Remote
Dimension
L 675 W 320 H 285 mm
(L 26.57 W 12.6 H 11.22 inch)
Weight
25 kg (55.1 lbs)
17. Machine Dimension
675 mm
320 mm
285 mm