Antari Z-350 FAZER User manual

1
Z-350 FAZER
USER MANUAL
English Français Deutsch€ € €
2013 Antari Lighting and Effects Ltd.
www.clubsoundrent.nl

2
User Manual
Safety Information
Please read the following safety information carefully before operating the
machine. Information includes important safety information about installation,
usage, and maintenance. Pay attention to all warning labels and instructions in
this manual and printed on the machine.
If you have questions about how to operate the machine safely, please contact your local
Antari dealer for help.
Keep this device dry.
Always connect to a grounded circuit to avoid risk of electrocution.
Before connecting machine to power, always check voltage indicate on machine match
to your local AC voltage. Do not use the machine if AC power voltage does not match.
Disconnect the machine from AC power before servicing and when not in use.
This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,
disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts,
immediately unplug the machine and contact your local Antari dealer for advice.
No user serviceable and modifiable parts inside. Never try to repair this product,
unauthorized technician may lead machine to damage or malfunction.
For adult use only. Never leave the machine running unattended.
Installed in well ventilated area. Provide at least 50 cm space around the machine.
Never add flammable liquid of any kind to the machine.
Make sure there are no flammable materials close to the machine while operating.
Only use Antari fluid. Other fluid may lead to heater clog and malfunction.
If the machine fails to work, unplug the machine and stop operation immediately.
Contact your local Antari dealer for advise.
Before transporting the machine, make sure the fluid tank is completely drained.

3
Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it
securely. In case of eye contact or if fluid is swallowed immediately look for medical
advice.
Unpacking and Inspection
Immediately upon receiving the machine, carefully unpack the carton, check all content to
ensure that all parts are present and have been received in good condition. If any parts
appear damaged or mishandled from shipping, notify the shipper immediately and retrain the
packing material for inspection.
What is included: 1 x Z-350 Fazer
1 x Power Cord
1 x User Manual
Product Dimension

4
Product Overview
Fan
Smoke Output Nozzle
DIP Switch (DMX
Address Setting)
Wire Remote Socket
Fluid Level Gauge
Fluid Tank Cap
Output Level
Adjustment Knob
Fan Speed
Adjustment Knob
Power Inlet
Main Power Switch
XLR 3-Pin DMX
Connector

5
Setting Up
Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm
open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to suitable rated power supply. To determine the power
requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 4 mintues.
Once the machine has reached operating temperature, the status LED will light €Solid
Green•. Now the machine is ready for operation.
Step 5: To start making haze, locate the SMOKE rotary knob on the back side of machine,
and simply turn it clockwise to start.
Step 6: To turn off the machine, put the power switch to the OFF position.
Operation
Control Panel Operation
The machine can be operated with the two rotary knobs located on the rear.

6
Rotary Knob
Function
SMOKE
Turn haze on/off, adjust output volume from 0~100%
FAN
Adjust fan speed from 20%~100%
Remote Control Operation (Optional)
To operate the machine by remote control, connect the remote to the microphone jack
located on the rear of machine. Use the switch to turn haze on/off, and use the rotary knob to
adjust the output volume from 0~100%.
DMX Operation
Making the DMX Connection ‚ Connect machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses an 3-pin XLR connector for DMX connection,
the connector is located on the rear of the machine.
Address Setup ‚ Use the DIP switch located on the rear of the machine to set the DMX
address. The machine occupies 2 control channels. The starting address is defined as the
first channel from which the machine will respond to the controller. Always double check to
make sure there are no overlapping channles in order to control the machine correctly.

7
DMX Channel Function
Channel 1
DMX Value Range
Function
Haze Output Level
0 ‚ 4
Haze Off
5 ‚ 255
Haze Output 1 ‚ 100%
Channel 2
DMX Value Range
Function
Fan Output Level
0 ‚ 4
Fan 20%
5 ‚ 255
Fan 21 ‚ 100%
Fluid
Only use Antari FLG water-based liquid for the Z-350 Fazer. The machine is tested and
calibrated with this liquid to get the best output performance. Warranty will be void if any
other type of liquid is used, improper use of liquid may lead to machine failure and
malfunction.
Service and Maintenance
Do not allow the machine to become contaminated.
Remove dust from air vents with air compressor, vacuum or a soft brush.
Only use a damp cloth to clean the casing.
Before storing run distilled water through the system to help avoid condensing the pump
or heater.
It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
Excessive dust, liquid and dirt built up will degrade performance and cause overheating.

8
Fuse Replacing
Disconnect AC power before replacing fuse. Only replace fuse with same type
and rating.
Step 1: Disconnect power cord from supply.
Step 2: Use a flat-head screwdriver to release fuse holder.
Step 3: Replace fuse with exact same type and rating as indicated below.
Step 4: Reinsert fuse holder.
Fuse
100V = T6.3A 250V
110 ‚ 120V = T7A 250V
220 ‚ 240V = T4A 250V
Status Messages
Status LED
Indication
Flashing Green
Machine is heating up
Flashing Green (3 seconds)
Self Cleaning
Solid Green
Machine ready for operation
Flashing Amber
Producing haze
Solid Amber
DMX signal received
Solid Red
Heater is overheating, machine can
not be operated
Flashing Red
Liquid detected backflow to air pump
Flashing Red/Green
Machine cannot heat up

9
Technical Specifications
Input voltage 110-120V 60Hz
220-240V 50Hz
Fuse 100V = T6.3A 250V
110 ‚ 120V = T7A 250V
220 ‚ 240V = T4A 250V
Heater 100Vac - 520W , 120Vac ‚ 800W
220Vac - 600W , 240Vac ‚ 730W
Warm-up time 3.5 ‚ 4 min. (approx.)
Coverage volume 3000 cu.ft./min. (85 m•/min.)
Max. operating time 7.2 hrs max. output
Fluid tank capacity 1.3 l (0.34 gal)
Fluid consumption 3 ml/min.
Compatible fluid Antari FLG water-based fluid
Control option DMX 512, Cable remote, Manual,
Adjustable haze volume and fan speed
DMX channels 2 channels, haze volume and fan speed
Power connection IEC
DMX data connection 3-pin XLR
Remote control connection 3.5mm headphone jack
Dimension L 320 x W 153 x H 391 mm
(L 12.59 x W 6.02 x H 15.30 inch)
Dry weight 8.82 kg (19.44 lb)
Accessories (Optional) Z-3 remote control