Antec Kuhler H2O 950 User manual

1 2 3
LGA1150/
LGA1155/
LGA1156
LGA1366
LGA2011
LGA775
AMD
LGA1150/
LGA1155/
LGA1156
LGA775
LGA1366
LGA2011
EN: Adjust mounting bracket (D) to Intel or AMD configuration.
Insert bracket clip (L) EN: Remove the adhesive backing. Align metal inserts and push the
backplate firmly against the back of the motherboard
EN: Flip the backplate (A) to Intel or AMD side. Place metal inserts (B)
into four mounting holes that correspond with your chipset. Adhere
double sided tape to the opposite side of the backplate
X4
X4
X4
X4
X4
X4
X4
X4
h2o
Kühler
ANTECGRID™
LiquidCooling Software v.1.0
LGA2011
L
LGA775
AMD
6631AGL
L
LGA 1150/
1155/1156
4
EN: Remove the plastic covering from the copper cold plate. Then attach
mounting bracket to the coldplate by aligning and twisting clockwise
until it locks into place
5 6 7
1
2
43
1
2
34
EN: Connect the female 4- pin connector from the fan to the 4-pin male
connector from the coldplate. Connect the 3-pin female connector
from the coldplate to the 3-pin or 4pin CPU fan or chassis fan
connector on your motherboard
Note: make sure to disable the Q-Fan Control function of the connector in the BIOS
EN: Find the correct screws (F, E or G) to attach your cold plate to the
motherboard
(F): Screws for Intel LGA 2011 Socket
(E): Screws for Intel LGA 775, 1150, 1155, 1156 and 1366, and
AMD Sockets
(G): Screws for original AMD back plate that comes with the motherboard
EN: Install radiator with the screws provided

8
EN: Install the software (included CD) to the system. Restart the system
M
h2o
Kühler
ANTEC GRID™
Liquid Cooling Software v.1.0
Discover other computers & hardware on our website.