Anyload 805HP User manual

Anyload Transducer Co. Ltd.
Website: www.anyload.com
Email: [e-mail]
Fax: [phone]
North America Toll Free: 1-855-ANYLOAD (269 5623)
®
805HP
Handheld Digital Weight Indicator
User’s Manual (V1710)
Anyload Transducer Co.Ltd
Website: www.anyload.com
Email: info @ anyload.com

TABLE OF CONTENTS
1.
2. Safety Recommendations
3. Display Icon List
4. Keys
4.1 Key List
4.2 Key Instructions for all weighing modes
5. Work Modes
5.1 Overview
5.2 Operation Mode Switching Diagram
6. Start Up and Adjust
6.1 Battery Installation
6.2 Indicator Dimensions
6.3 Connection Diagrams
6.3.1 805HP Wired Model
6.3.2 805HP Wireless Model
7. Weighing Modes
7.1 Normal Weighing Mode
7.1.1 Basic Operations in Normal Weighing Mode
7.2 Gross / Net Mode
7.3 Peak Mode
7.4 Cumulate Mode
7.5 Calibration Mode
8. Configurations and Menu Operations
8.1 Menu Operations
8.2 Overload
8.3 Modify Password
9. Communication
9.1 RS232 Communication
9.2 Wireless Communication
10. Calibration and Parameter Settings
10.1 Standard Value Calibration
10.2 Digit Calibration
11. Troubleshooting Guides
12. Technical Specifications
13. Appendices
13.1 Seven-segment digital display alphanumeric table
13.2 Gravitational acceleration in different countries
Introductions and Features 2
2
3
4
4
5
6
6
6
7
7
7
9
9
10
10
11
11
12
12
13
14
15
15
20
21
22
22
23
25
25
28
30
30
33
33
33
® ®
1. Introductions and Features
industry.
Key Features include:
×
2. Safety Recommendations
1
1
1
1
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Exceptionally long battery life ( 3 AA batteries )
LED backlight and panoramic FSTN LCD view angle
Material: ABS
IP Rating: Ip65
LCD 6-digit display with LED backlight
Non-volatile memory for reliable data saving
Units of Measurement: kg, g, t, lb, Klb, N, kN, oz, user-defined unit
Configurable 21 set-points for precaution and warning
User-selectable display interval
Overloading recording
10 user-selectable analog-to-digital converting frequency
Weight calibration and digital calibration
User-selectable auto power-off and power-saving timing
Functions: Auto-Zero Tracking, Auto-Zero, Manual-Zero, Hold,
Peak-Hold, TARE
installing, operating or configuring the indicator.
mark:
Thank you for choosing Anyload 805HP Handheld Digital Weight Indicator. The
805HP hand held digital weight indicator is a general purpose and durable
indicator that provides high accuracy, reliability and multiple functions. The
805HP can drive up to eight 350Ω or thirty two 1000Ω load cells. With an IP65
ABS wash down enclosure, the 805HP digital weighing indicator is ideal for use in
Transportation, Entertainment, Aerospace, Military, Food and Agricultural
1
1
1
This manual provides installation, operation and configuration information of
805HP indicator. It is recommended to go through the manual in details before
Important instructions which involve safety are highlighted with the appropriate
ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 21 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710)

TABLE OF CONTENTS
1.
2. Safety Recommendations
3. Display Icon List
4. Keys
4.1 Key List
4.2 Key Instructions for all weighing modes
5. Work Modes
5.1 Overview
5.2 Operation Mode Switching Diagram
6. Start Up and Adjust
6.1 Battery Installation
6.2 Indicator Dimensions
6.3 Connection Diagrams
6.3.1 805HP Wired Model
6.3.2 805HP Wireless Model
7. Weighing Modes
7.1 Normal Weighing Mode
7.1.1 Basic Operations in Normal Weighing Mode
7.2 Gross / Net Mode
7.3 Peak Mode
7.4 Cumulate Mode
7.5 Calibration Mode
8. Configurations and Menu Operations
8.1 Menu Operations
8.2 Overload
8.3 Modify Password
9. Communication
9.1 RS232 Communication
9.2 Wireless Communication
10. Calibration and Parameter Settings
10.1 Standard Value Calibration
10.2 Digit Calibration
11. Troubleshooting Guides
12. Technical Specifications
13. Appendices
13.1 Seven-segment digital display alphanumeric table
13.2 Gravitational acceleration in different countries
Introductions and Features 2
2
3
4
4
5
6
6
6
7
7
7
9
9
10
10
11
11
12
12
13
14
15
15
20
21
22
22
23
25
25
28
30
30
33
33
33
® ®
1. Introductions and Features
industry.
Key Features include:
×
2. Safety Recommendations
1
1
1
1
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Exceptionally long battery life ( 3 AA batteries )
LED backlight and panoramic FSTN LCD view angle
Material: ABS
IP Rating: Ip65
LCD 6-digit display with LED backlight
Non-volatile memory for reliable data saving
Units of Measurement: kg, g, t, lb, Klb, N, kN, oz, user-defined unit
Configurable 21 set-points for precaution and warning
User-selectable display interval
Overloading recording
10 user-selectable analog-to-digital converting frequency
Weight calibration and digital calibration
User-selectable auto power-off and power-saving timing
Functions: Auto-Zero Tracking, Auto-Zero, Manual-Zero, Hold,
Peak-Hold, TARE
installing, operating or configuring the indicator.
mark:
Thank you for choosing Anyload 805HP Handheld Digital Weight Indicator. The
805HP hand held digital weight indicator is a general purpose and durable
indicator that provides high accuracy, reliability and multiple functions. The
805HP can drive up to eight 350Ω or thirty two 1000Ω load cells. With an IP65
ABS wash down enclosure, the 805HP digital weighing indicator is ideal for use in
Transportation, Entertainment, Aerospace, Military, Food and Agricultural
1
1
1
This manual provides installation, operation and configuration information of
805HP indicator. It is recommended to go through the manual in details before
Important instructions which involve safety are highlighted with the appropriate
ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 21 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710)

3 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 4
personnel.
3. Display Icon List
Refer to Section 13 (Appendices) for detailed on alphanumeric symbols.
(Appendix 13.1-Seven Segment digital display alphanumeric table)
1
Icon Meaning
There are hidden figures which can be shown on the following page
805HP Battery Power indicator
Peak hold mode
Weights saved to memory
Tare value acquired
Gross weight mode
Cumulate Mode
Scale is zeroed
Wireless signal strength
Load cell battery power indicator (dotted line)
Weight exceeded the maximum capacity “overload warning value”
signal
Signal stability
Key Functions
Power Button
Tare; Down key
Unit; Left key
Zero; Up key; Return key
Peak; Right key
Cumulate; Enter key
4. Keys
4.1 Key List
When it is required to work inside the indicator enclosure for some
procedures described, the work can only be performed by qualified technical
® ®

3 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 4
personnel.
3. Display Icon List
Refer to Section 13 (Appendices) for detailed on alphanumeric symbols.
(Appendix 13.1-Seven Segment digital display alphanumeric table)
1
Icon Meaning
There are hidden figures which can be shown on the following page
805HP Battery Power indicator
Peak hold mode
Weights saved to memory
Tare value acquired
Gross weight mode
Cumulate Mode
Scale is zeroed
Wireless signal strength
Load cell battery power indicator (dotted line)
Weight exceeded the maximum capacity “overload warning value”
signal
Signal stability
Key Functions
Power Button
Tare; Down key
Unit; Left key
Zero; Up key; Return key
Peak; Right key
Cumulate; Enter key
4. Keys
4.1 Key List
When it is required to work inside the indicator enclosure for some
procedures described, the work can only be performed by qualified technical
® ®

5 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) |6
5. Work Modes
5.1 Overview
5.2 Operation Mode Switching Diagram
1
Modes
Buttons Press
Duration Normal Peak Cumulate
Long Press
(2 sec)
Short Press
(0.5 sec)
Turn Off Turn Off Turn Off
Long Press
(2 sec)
Short Press
(0.5 sec)
Exit cumulate
mode
Accumulate
(Add weight to
memory)
Show
cumulative
value
Show
cumulative
value
【SWITCH】
Long Press
(2 sec)
Short Press
(0.5 sec) Zero the scale
Clear cumulative
value
Long Press
(2 sec)
Short Press
(0.5 sec)
Return to
Normal
Weighing Mode
Go to Peak
mode
Holding /
Cancel
Clear peak
value
Long Press
(2 sec)
Short Press
(0.5 sec) Switch units Switch units
Long Press
(2 sec)
Short Press
(0.5 sec)
Gross / Net
Weight
Tare / Untare
Gross / Net
Weight
【TARE】
【CUMULATE】
【ZERO】
【HOLD】
【UNITS】
Operation mode
Power-off
Operation mode
Power-saving
Function
When the indicator is turned off, date will be
saved in non-volatile memory.
When the indicator enters wake-up mode, all
functions are enabled and the power run
dynamically.
When LCD is on and backlight is off, the
RS232 circuit is off.
4.2 Key Instructions for all weighing modes
Power-off
Weighing
Mode
Power-
saving
Long press on/off button
for 2-3 seconds
Any button can wake up
Long press on/off button
for 2-3 seconds
No operation in setting time
No operation in setting time
® ®

5 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) |6
5. Work Modes
5.1 Overview
5.2 Operation Mode Switching Diagram
1
Modes
Buttons Press
Duration Normal Peak Cumulate
Long Press
(2 sec)
Short Press
(0.5 sec)
Turn Off Turn Off Turn Off
Long Press
(2 sec)
Short Press
(0.5 sec)
Exit cumulate
mode
Accumulate
(Add weight to
memory)
Show
cumulative
value
Show
cumulative
value
【SWITCH】
Long Press
(2 sec)
Short Press
(0.5 sec) Zero the scale
Clear cumulative
value
Long Press
(2 sec)
Short Press
(0.5 sec)
Return to
Normal
Weighing Mode
Go to Peak
mode
Holding /
Cancel
Clear peak
value
Long Press
(2 sec)
Short Press
(0.5 sec) Switch units Switch units
Long Press
(2 sec)
Short Press
(0.5 sec)
Gross / Net
Weight
Tare / Untare
Gross / Net
Weight
【TARE】
【CUMULATE】
【ZERO】
【HOLD】
【UNITS】
Operation mode
Power-off
Operation mode
Power-saving
Function
When the indicator is turned off, date will be
saved in non-volatile memory.
When the indicator enters wake-up mode, all
functions are enabled and the power run
dynamically.
When LCD is on and backlight is off, the
RS232 circuit is off.
4.2 Key Instructions for all weighing modes
Power-off
Weighing
Mode
Power-
saving
Long press on/off button
for 2-3 seconds
Any button can wake up
Long press on/off button
for 2-3 seconds
No operation in setting time
No operation in setting time
® ®

7 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 8
Open the battery compartment cover and install the battery as shown in figure
Note: Remove the battery when indicator will not be used for a long period.
Start up-After installing the battery, long press the on / off button for 2-3
seconds then release it. The indicator will beep and the screen shows
Power off: Long press on / off button for 2-3 seconds then release it. The
Ø
Ø
6. Start Up and Adjust
6.1 Battery Installation
below.
initialization until reached to indicator weighing system.
screen shows OFF, the indicator is turning off.
6.2 Indicator Dimensions
1
1
L
H
WH1
L1
L3
L2
H2
L2
(Unit)
inches
mm
HH1 H2 LL1 L2 L3 W
6.7
170
1.1
27
0.5
13
3.9
98
2.8
72
0.6
15
3.2
80
1.3
34
® ®

7 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 8
Open the battery compartment cover and install the battery as shown in figure
Note: Remove the battery when indicator will not be used for a long period.
Start up-After installing the battery, long press the on / off button for 2-3
seconds then release it. The indicator will beep and the screen shows
Power off: Long press on / off button for 2-3 seconds then release it. The
Ø
Ø
6. Start Up and Adjust
6.1 Battery Installation
below.
initialization until reached to indicator weighing system.
screen shows OFF, the indicator is turning off.
6.2 Indicator Dimensions
1
1
L
H
WH1
L1
L3
L2
H2
L2
(Unit)
inches
mm
HH1 H2 LL1 L2 L3 W
6.7
170
1.1
27
0.5
13
3.9
98
2.8
72
0.6
15
3.2
80
1.3
34
® ®

9 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 10
kg
Klb
kN
toz
UN
Load
Cell
Communication
& Printer
RXD Red
(Communication &
Printer)
GND Black
TXD Green
(Communication &
Printer)
AVAILABLE OPTION
1
2
3
5
4
6
7
Exc+ Red
Exc - Black
Sig+ Green
Sig - White
Sense+ Blue
Sense- Yellow
Shield
1
2
3
5
4
6
7
6.3.2 805HP Wireless Model
Wireless Communication of this manual.
7. Weighing Modes
the full range zero range.
1
1
The indicator is set to match the corresponding wireless transceiver of a wireless
scale. Usually 805HP-WL wireless model is paired with Anyload 110RH-WL
TENSLINK scale or 110ES-WL Salt Waterproof scale. If you need to change the
indicator’s wireless configurations due to radio frequency interference, you can
configure the communication parameters with the following steps in Section 9.2
The indicator has three (3) weighing modes namely, Normal Mode, Cumulate
Mode and Peak Mode. The indicator will automatically set to Normal Mode upon
starting it up. Usually it will be zeroed automatically when it is within the 20% of
1
6.3 Connection Diagrams
6.3.1 805HP Wired Model
Connect load cell (communication & printer) to 805HP according to the following
connection diagram:
1
1
® ®

9 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 10
kg
Klb
kN
toz
UN
Load
Cell
Communication
& Printer
RXD Red
(Communication &
Printer)
GND Black
TXD Green
(Communication &
Printer)
AVAILABLE OPTION
1
2
3
5
4
6
7
Exc+ Red
Exc - Black
Sig+ Green
Sig - White
Sense+ Blue
Sense- Yellow
Shield
1
2
3
5
4
6
7
6.3.2 805HP Wireless Model
Wireless Communication of this manual.
7. Weighing Modes
the full range zero range.
1
1
The indicator is set to match the corresponding wireless transceiver of a wireless
scale. Usually 805HP-WL wireless model is paired with Anyload 110RH-WL
TENSLINK scale or 110ES-WL Salt Waterproof scale. If you need to change the
indicator’s wireless configurations due to radio frequency interference, you can
configure the communication parameters with the following steps in Section 9.2
The indicator has three (3) weighing modes namely, Normal Mode, Cumulate
Mode and Peak Mode. The indicator will automatically set to Normal Mode upon
starting it up. Usually it will be zeroed automatically when it is within the 20% of
1
6.3 Connection Diagrams
6.3.1 805HP Wired Model
Connect load cell (communication & printer) to 805HP according to the following
connection diagram:
1
1
® ®

11 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 12
III. Remove Stored Tare Value
Gross weight mode when [Tare mark] is off.
7.2 Gross / Net Mode
[Gross Weight mark] appears if it is in gross weight mode.
[Gross Weight mark] disappears if it is in net weight mode.
7.3 Peak Mode
recording the peak reading of weights.
appears
I. Peak / Normal Weighing Mode
1
1
1
1
1
1
7.1 Normal Weighing Mode
weighing.
appear in the display
7.1.1 Basic Operations in Normal Weighing Mode
I. Zero the Scale
II. Acquire Tare Value
[Gross weight mark] is off.
1
1
1
1
Normal Mode is the most common application in weighing mode which is
enabled by default in the indicator. This mode meets most of the weighing
requirements. The Normal Mode is the real-time feedback and the accurate
When indicator is set to the Normal Weighing mode, (Peak mark) will not
Remove the loads from the scale and wait until [Stable mark] appears. The
scale should not in Tare mode and [Gross weight mark] is on. Press
【ZREO】 and [Zero mark] appears. Zero the scale setting is completed.
When no Tare is stored [Tare mark] does not appear. Place the load on the scale
and wait until [Stable mark] appears. Press 【TARE】, the tare weight will
be stored. The display is in Net weight when [Tare mark] is displayed and
1
1
1
1
When indicator has stored tare weight value other than 0, [Tare mark] appears.
Press 【Tare】to remove the stored tare weight value. The display is in
When tare weight is stored (indicator has stored tare weight value other than 0),
press 【TARE】to change from net weight to gross weight or vice versa.
Peak Mode is a weighing mode which indicator shows and hold the peak weight
value in the process of weighing. This mode is typically applied to a system when
To activate Peak Weighing Mode, long press 【HOLD】and [Peak mark]
1
1
® ®

11 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 12
III. Remove Stored Tare Value
Gross weight mode when [Tare mark] is off.
7.2 Gross / Net Mode
[Gross Weight mark] appears if it is in gross weight mode.
[Gross Weight mark] disappears if it is in net weight mode.
7.3 Peak Mode
recording the peak reading of weights.
appears
I. Peak / Normal Weighing Mode
1
1
1
1
1
1
7.1 Normal Weighing Mode
weighing.
appear in the display
7.1.1 Basic Operations in Normal Weighing Mode
I. Zero the Scale
II. Acquire Tare Value
[Gross weight mark] is off.
1
1
1
1
Normal Mode is the most common application in weighing mode which is
enabled by default in the indicator. This mode meets most of the weighing
requirements. The Normal Mode is the real-time feedback and the accurate
When indicator is set to the Normal Weighing mode, (Peak mark) will not
Remove the loads from the scale and wait until [Stable mark] appears. The
scale should not in Tare mode and [Gross weight mark] is on. Press
【ZREO】 and [Zero mark] appears. Zero the scale setting is completed.
When no Tare is stored [Tare mark] does not appear. Place the load on the scale
and wait until [Stable mark] appears. Press 【TARE】, the tare weight will
be stored. The display is in Net weight when [Tare mark] is displayed and
1
1
1
1
When indicator has stored tare weight value other than 0, [Tare mark] appears.
Press 【Tare】to remove the stored tare weight value. The display is in
When tare weight is stored (indicator has stored tare weight value other than 0),
press 【TARE】to change from net weight to gross weight or vice versa.
Peak Mode is a weighing mode which indicator shows and hold the peak weight
value in the process of weighing. This mode is typically applied to a system when
To activate Peak Weighing Mode, long press 【HOLD】and [Peak mark]
1
1
® ®

13 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 14
When [Peak mark] appears, peak mode is activated. The display always shows
the maximum value of load which has been applied to the load cell. When the
load is removed, the display still shows the peak load. When [Peak mark]
disappears, peak mode is deactivated. The value shown on display changes
according to the load applied to the load cell. Long press the 【HOLD】can
change the indicator from Peak mode to Normal Weighing mode, or vice versa.
When Peak mode is on, [Peak mark] appears. Remove the load and short press
the 【HOLD】button. The peak mode value is removed and indicator will
Cumulate Mode is a special function added under the normal weighing mode. In
this mode, the indicator saves weight readings into memory and previews the
accumulated weight value for all saved weight readings. Both real-time feedback
Only and during in the normal weighing mode and if the indicator reading is
more than zero or when the weight has been tared, short press to record the
The recently saved weight readings will be displayed in the screen after one
second. The sign appears in the lower left corner of the screen. This means
1
II. How to view the cumulative value?
the middle of the screen. Indicator shows as follows:
peak mode, or vice versa.
III. Gross / Net Mode
vice versa.
Display shows total gross weight value - [Gross Weight mark] is on.
Display shows total net weight value - [Gross Weight mark] is off.
IV. Clear Cumulative Value
value will be cleared.
7.5 Calibration Mode
to Section 10 for the Calibration of the scale system)
1
1
1
1
1
1
1
Long press the and it shows the cumulative value. The sign appears in
Long press , indicator changes from Cumulate to Normal weighing mode or
Press 【TARE】, the indicator changes from Gross mode to Net mode, or
Long press 【ZERO】, the total gross weight value and total net weight
In this mode, you have to enter the menu and parameter settings module. (Refer
1
1
1
II. Remove Peak Mode Value
start another Peak mode operation.
7.4 Cumulate Mode
weighing data can also check the cumulative weighing value.
I. How to cumulate weighing values?
current weight data. Indicator shows as follows:
that weight data are recorded and be accumulated.
1
1
® ®

13 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 14
When [Peak mark] appears, peak mode is activated. The display always shows
the maximum value of load which has been applied to the load cell. When the
load is removed, the display still shows the peak load. When [Peak mark]
disappears, peak mode is deactivated. The value shown on display changes
according to the load applied to the load cell. Long press the 【HOLD】can
change the indicator from Peak mode to Normal Weighing mode, or vice versa.
When Peak mode is on, [Peak mark] appears. Remove the load and short press
the 【HOLD】button. The peak mode value is removed and indicator will
Cumulate Mode is a special function added under the normal weighing mode. In
this mode, the indicator saves weight readings into memory and previews the
accumulated weight value for all saved weight readings. Both real-time feedback
Only and during in the normal weighing mode and if the indicator reading is
more than zero or when the weight has been tared, short press to record the
The recently saved weight readings will be displayed in the screen after one
second. The sign appears in the lower left corner of the screen. This means
1
II. How to view the cumulative value?
the middle of the screen. Indicator shows as follows:
peak mode, or vice versa.
III. Gross / Net Mode
vice versa.
Display shows total gross weight value - [Gross Weight mark] is on.
Display shows total net weight value - [Gross Weight mark] is off.
IV. Clear Cumulative Value
value will be cleared.
7.5 Calibration Mode
to Section 10 for the Calibration of the scale system)
1
1
1
1
1
1
1
Long press the and it shows the cumulative value. The sign appears in
Long press , indicator changes from Cumulate to Normal weighing mode or
Press 【TARE】, the indicator changes from Gross mode to Net mode, or
Long press 【ZERO】, the total gross weight value and total net weight
In this mode, you have to enter the menu and parameter settings module. (Refer
1
1
1
II. Remove Peak Mode Value
start another Peak mode operation.
7.4 Cumulate Mode
weighing data can also check the cumulative weighing value.
I. How to cumulate weighing values?
current weight data. Indicator shows as follows:
that weight data are recorded and be accumulated.
1
1
® ®

15 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 16
III. Menu Layout Structure and Navigation key operation
IV. Menu Structure and Parameter Description
different level menus.
next level menu or parameter.
choice.
last menu.
exit.
1
1
8. Configurations and Menu Operations
8.1 Menu Operations
I. Menu Settings
II. Menu Operations
Entering the menu:
Press at the same time for 1-2 seconds, the indicator will show
the password interface:
Short press or → Choosing digit
Short press → Increasing the numerical value of the digit.
Short press → Decreasing the numerical value of the digit.
The default password is: P00805.
1
1
1
short press
long press
【TARE】 【CUMULATE】【ZERO】 【HOLD】
【UNITS】
Add/delete
decimal point
Level 1 Menu-1
Same
as
above
Level 1 Menu-2
Level 1 Menu-N
Level 2 Menu-1
Level 2 Menu-2
Level 2 Menu-N
Parameter-1
Parameter-2
Parameter-N
Same
as
above
Value-1
Value-2
Value-N
There are 4 directional keys , , , to be used for the
operation. , are used for horizontal movement in the same level menu
and parameters. , are used for moving up and down through
Use , to choose a parameter in a menu and use to move to the
When moving into a parameter of a menu, the indicator shows the previous
If you want to change the parameter values, use to move into the parameter
change status. When the parameter of a menu is a fixed value, use , to
move horizontally. Use to store the selected parameter and to return to the
When a parameter value of a menu is editable, diretional keys , are used
to edit the digit selected, directional keys , are used to increase and
decrease the value of the selected digit. Press to save the input values and
1
® ®

15 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 16
III. Menu Layout Structure and Navigation key operation
IV. Menu Structure and Parameter Description
different level menus.
next level menu or parameter.
choice.
last menu.
exit.
1
1
8. Configurations and Menu Operations
8.1 Menu Operations
I. Menu Settings
II. Menu Operations
Entering the menu:
Press at the same time for 1-2 seconds, the indicator will show
the password interface:
Short press or → Choosing digit
Short press → Increasing the numerical value of the digit.
Short press → Decreasing the numerical value of the digit.
The default password is: P00805.
1
1
1
short press
long press
【TARE】 【CUMULATE】【ZERO】 【HOLD】
【UNITS】
Add/delete
decimal point
Level 1 Menu-1
Same
as
above
Level 1 Menu-2
Level 1 Menu-N
Level 2 Menu-1
Level 2 Menu-2
Level 2 Menu-N
Parameter-1
Parameter-2
Parameter-N
Same
as
above
Value-1
Value-2
Value-N
There are 4 directional keys , , , to be used for the
operation. , are used for horizontal movement in the same level menu
and parameters. , are used for moving up and down through
Use , to choose a parameter in a menu and use to move to the
When moving into a parameter of a menu, the indicator shows the previous
If you want to change the parameter values, use to move into the parameter
change status. When the parameter of a menu is a fixed value, use , to
move horizontally. Use to store the selected parameter and to return to the
When a parameter value of a menu is editable, diretional keys , are used
to edit the digit selected, directional keys , are used to increase and
decrease the value of the selected digit. Press to save the input values and
1
® ®

17 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 18
In the actual menu structure, the selected menu item is displayed horizontally.
The parameter value with the symbol [ ] is the default value of system reset.
Level 1 Menu Level 2 Menu Description Parameter Value Note
buzzer switch
Backlight
switch
Background
light turn off
time/ S
dis/1/2/3/5/[10]
/15/20/30/60
[on]/off
[on]/off
Auto off time
/min
Unit kg
Unit t
Unit g
Unit lb
Unit oz
Unit Klb
Unit N
Unit kN
User’s unit
"dis"means that
the indicator
will not be
power-off
automatically
[on]/off
on/[off]
on/[off]
[dis]/1/2/3/5/10
/15/20/30/60
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
"dis"means that
the backlight
is always on
(Basic
parameter
Settings)
User’s unit
coefficient
Default unit
Any Number
(related to the
software mode)
kg/t/g/lb/oz/klb
/N/kN/UN
Overload
Warning [on]/off
Overload
Warning
value
Any Number
Overload
Alarm
Overload
Alarm value
[on]/off
Any Number
Historical
maximum
overload
value
(read only)
See: Note1
Division value
0.001/0.002
/0.005/0.01/0.02
/0.05/0.1/0.2/0.5
/[1]/2/5/10/20
/50
Rated
Weighing Any Number
4.17/6.25/8.33/
[10]/12.5/16.7/
33.2/50/62/123
Stability
Judgement
times/s
0.5/[1]/2
Stability
Judgement
range/d
0.1/0.2/0.3/0.4/
[0.5]/0.75/1/1.25
/1.5/1.75/2/2.5/3
/3.5/4/5
Acceleration
of gravity
value
Any Number
(Overload
setting)
Sampling
speed/Hz
(Weighing
coefficient
setting)
® ®

17 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 18
In the actual menu structure, the selected menu item is displayed horizontally.
The parameter value with the symbol [ ] is the default value of system reset.
Level 1 Menu Level 2 Menu Description Parameter Value Note
buzzer switch
Backlight
switch
Background
light turn off
time/ S
dis/1/2/3/5/[10]
/15/20/30/60
[on]/off
[on]/off
Auto off time
/min
Unit kg
Unit t
Unit g
Unit lb
Unit oz
Unit Klb
Unit N
Unit kN
User’s unit
"dis"means that
the indicator
will not be
power-off
automatically
[on]/off
on/[off]
on/[off]
[dis]/1/2/3/5/10
/15/20/30/60
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
on/[off](related
to the software
mode)
"dis"means that
the backlight
is always on
(Basic
parameter
Settings)
User’s unit
coefficient
Default unit
Any Number
(related to the
software mode)
kg/t/g/lb/oz/klb
/N/kN/UN
Overload
Warning [on]/off
Overload
Warning
value
Any Number
Overload
Alarm
Overload
Alarm value
[on]/off
Any Number
Historical
maximum
overload
value
(read only)
See: Note1
Division value
0.001/0.002
/0.005/0.01/0.02
/0.05/0.1/0.2/0.5
/[1]/2/5/10/20
/50
Rated
Weighing Any Number
4.17/6.25/8.33/
[10]/12.5/16.7/
33.2/50/62/123
Stability
Judgement
times/s
0.5/[1]/2
Stability
Judgement
range/d
0.1/0.2/0.3/0.4/
[0.5]/0.75/1/1.25
/1.5/1.75/2/2.5/3
/3.5/4/5
Acceleration
of gravity
value
Any Number
(Overload
setting)
Sampling
speed/Hz
(Weighing
coefficient
setting)
® ®

19 | ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710) | 20
Zero A/D
count (read only)
Calibrated
weight (read only)
Calibrated
point A/D
count
(read only)
Zero offset
value (read only)
Detailed
operating
method is as
follow: 4.4.1
Detailed
method to
Standard value
Calibration
Input the
Zero A/D
count
Any Number
Input the
corres-
ponding
calibration
value
manually
Any Number
Input the
corres-
ponding
calibration
A/D code
manually
Any Number
Detailed
operating
method is as
follow: 4.4.2
Detailed
method to Digit
Calibration
Serial com-
munication on/[off]
Baud rate/
bps
[1200]/2400/
4800/9600
Output DB [8n1]/8o1/8e1
Com-
munication
mode
[Contin]/reque
See: note2
See: note3
-
-
-
-
(Digit input
calibration)
(Standard
value
Calibration)
(RS232
setting)
Wireless
transmission
frequency
[2Hz]/3Hz/4Hz/
5Hz
Wireless
address
0-255 Any
Number
Wireless
output on/[off]
Automatic
channel
search
Manual
switching
channel
1-16
Wireless gain 1-8
See: noet4
Software
version (read only)
System
parameter
reset
[None]/OIML/
NTEP/Canada
Software
mode
Used with
caution!
(Wireless
setting)
(System
parameter)
8.2 Overload
I. Records Overload
and shows the error message
1
1. This indicator records the real time overload situation. When load weight
exceeds the overload alarm set value, the background light flashes (if
background light is enabled), the panel shows (warning), the display flashes,
® ®