Anysecu G68 User manual

1/28
G68 User Instructions

2/28
Thank you for choosing our multi-frequences digital mobile phones.
This product is waterproof, dustproof, three anti-design anti-drop, the
water level reaches the IP68 level of international standards. Since
there are many uncertainties factors in actual use, the above three tests
are not suitable to operated personally, and our company isn’t
responsible for the product damage due to water seepage or caused by
fall.
Pictures in this manual are for reference only, if it’s not the products are
not the same as some of the individual images, please refer to real
product; and the actual function please refer to the real phone. We keep
improve ourselves, we keep the right to change the contents of this
manual without prior notice.

3/28
Table of Contents
Keys Instruction.............................................................................................5
Icon Instruction.............................................................................................. 7
Installing & Removing Battery………………………………………….….9
Startup & Shutdown……………………………………………………….10
As a Flash Driver…………………………………………………………..10
WLAN…………………………………………………………………….....11
Using Bluetooth…………………………………………………………….13
Using NFC…………………………………………………………………..15
Phone Settings……………………………………………………………..16
System………………………………………………………………………17
Shortcuts……………………………………………………………………19

4/28
Dial…………………………………………………………………………..21
Contacts…………………………………………………………………….22
Messaging………………………………………………………………….23
The Internet………………………………………………………………...24
Email………………………………………………………………………...25
Gallery……………………………………………………………………....26
Clock………………………………………………………………………...26
Multimedia Features……………………………………………………….27

5/28
Keys Instruction

6/28
Key
Instruction
Home
Return to the standby interface in any status
Power
Power on/off: long press power button to start
or power off the phone
Usually, press this key to lock screen.
Volume
Press this key to turn up/off the Volume
When audio playback, press side keys to
adjust volume.
Menu
Show the present menu options
Back
Return to the former Menu
SOS
Enter Into SOS Mode
PTT
Enter into Walkie Talkie Function

7/28
Icon Instruction

8/28

9/28
Come into use:
You can use it since there is some electricity on the battery. Please recharge the battery
after the battery is fully run out to keep the battery in best status.
Installing & removing battery:
Battery cover is waterproof design, with two water-proof screws. Lock the screw CW and
release the screw CCW. Do not take down the rubber seal to avoid water comes in. Lock
the battery cover tightly to keep it waterproof.

10 /28
Startup & Shutdown:
Start-up: long press power button to start the phone
Remark: If you have opened the UIM Card/Sim Card locking function in the setting
center, when power on, you need to input the PIN Code. After inputting the PIN
Code correctly, then you can use the Phone.
You can unlock the phone by sliding up after the phone is power on.
Shutdown: long press power button to power off the phone.
As a Flash Driver:
To transfer music , photos, and other files from a computer to your memory card,
you need firstly set up the phone card to be U disk.
Setting the phone card to be U disk
Connecting to the computer, select "USB computer connection" and then select
"USB storage device."

11 /28
Select "USB connection", select "Turn on USB storage" to load the U disk, music,
photos, and other files on the PC to your memory card or built-in memory card.
Note: When operating mobile assistant and other tools on the PC, you must turn
on USB debugging.
In the notification panel can be switched to the camera, media device, only
charging.
WLAN:
WLAN provide as far as 300 feet (100M) range of wireless network access. To use
WLAN on your phone, you must connect to a wireless access point or "hotspot."
Note: The availability and coverage of WLAN signals is subject to the number,
infrastructure, and other objects through the signal may be.
Open WI-FI and connected to a wireless network
1) Press Home> Menu, then touch Settings

12 /28
2) in a wireless network. Click the WLAN switch button to turn on WLAN. The
phone automatically scans for available wireless networks.
3) Touch WLAN, enter the WLAN setup. Then WLAN network list displays the
network name lookup to the WLAN network and security settings (open network
or WEP, WPA / WPA2 encryption). Advanced WLAN network is enabled by default
notification settings, the phone will be available in time to find an open wireless
network icon appears in the status bar.
4) Touch one of the WLAN network to connect. When you select an open network,
the phone will automatically connect to the network. If you choose the WEP, WPA /
WPA2 encrypted network, you must first enter the appropriate password, and then
touch the connection.
• Note: When the phone is connected to a wireless network, the status display will
show WLAN icon and the approximate signal strength (The number of strips). If
you touch the wireless network that the phone is connected, it will display the

13 /28
name of the WLAN network, status, speed, signal strength, security information
and IP address.
If you want to remove the wireless network settings on your phone, please touch
the "Do not Save" window. If you want to reconnect to this network, you must
re-enter these settings.
• Note: In addition, the phone also can be GPRS Internet access. Users can
manually select the specific location in the "Settings> Mobile Network> Data
Connections" touch "data connection" select on or off the current SIM card data
connection.
Using Bluetooth
1) Touch settings.
2) in a wireless network and, after entering the Bluetooth Click the Bluetooth
switch button to turn on Bluetooth. When turned on, the Bluetooth icon appears in

14 /28
the status bar. The phone will automatically scan for Bluetooth devices.
3) Touch Bluetooth, enter the Bluetooth settings, turn on Bluetooth or set your
phone to be detected below the list of all Bluetooth devices to locate the device
will be displayed.
(Click on the name of the local Bluetooth device, the phone can be set to detect
other Bluetooth devices within this range will be able to find the phone.)
• Note: The phone default can be detected for up to two minutes. Under device to
display the countdown time ends, and revert to the default undetectable state.
Bluetooth devices generally require a password to be paired. Below the headset
in the Bluetooth devices list, pairing and connection status is displayed. When the
Bluetooth headset is connected to the phone, the status bar will show the
Bluetooth connected icon. Then you can start using the headset to make or
receive calls.

15 /28
Using NFC:
NFC is a contactless identification and interconnection technology that allows
short-range wireless communications between mobile devices and PC.
General Application Information:
1. The machine in order to interconnect with other NFC devices, sharing, must
first in the "Settings" --- "More" will "NFC" is selected, the two devices must be
non-lock screen interface.
2. Open the interface you want to share, such as software or a single contact, and
two mobile phones with NFC antenna location on the list, it will send tinkling
sound. The sender then touch the screen once, two phone will display the same
content, the current phone supports sharing interface has music, pictures,
Individual contacts, settings for each interface, a single application, web pages.
Internet and application 3.NFC with other devices.
NFC is also widely used in access control, bank payment, brush bus card and

16 /28
other practical life, some features may require third-party support.
Phone settings:
Wireless network
WLAN: On Off WLAN, and related settings.
Bluetooth: Turn off Bluetooth, and related settings.
Mobile Internet: Mobile GPRS Internet settings
Data usage: Lets you clear understanding of their traffic-related absence of this
More: Click more to flight mode, VPN, NFC, Data usage settings, etc.
Accounts and Security
Security: can the screen is locked, owner information, encrypt the phone, SIM
card lock, password, device manager and unknown sources can be set.
Location information: Set access location-based services.
Personal Center: Add your company accounts, email accounts, and Google and

17 /28
so on. Add account will automatically appear in the Account column, you can have
your settings.
System:
Storage: display the card and the phone's memory.
Application: Applications can be on the phone to view, manage, and delete
operations.
Battery: Displays detailed battery usage.
Date and Time: set the current time, date, time zone, date and time formats.
Language & input: select the language of the input voice search and other
settings.
About phone: view phone status information, model number, the phone's software
and hardware information.
More:

18 /28
Restore factory settings: format the phone and restore to factory state
SIM Toolkit: voice telephony, video calls, messages, or data and other settings
Timer switch: Set the time, set the time to automatically turn on or off.
Accessibility: You can use some settings, such as TalkBack, spoken passwords
and other mobile phone accessibility options.
Developer options: set some developers need to use the option.
Sound: After the sound volume can open mode, silent mode, ringing tones,
message tones, vibrate when ringing, answering the vibration, touch-tone dialing,
touch-tone, screen lock tone, touch vibration sound can be set.
Display: Opens the phone brightness, wallpaper, backlight, battery percentage,
Auto-rotate screen, Sleep, font size, and SENSOR calibration personalize.
Lock screen notifications: the received notification is displayed in the locked
screen above.

19 /28
Shortcuts:
Standby interface, gently sliding down in the status bar area with your fingers, you
can open the notification bar to view the notification; you can quickly turn on / off
or enter the following settings:WLAN, Bluetooth, location, brightness, data
connectivity, NFC, auto-rotate, flight mode, you can press the appropriate shortcut
icons do by setting operation point.
Replacement of wallpaper: System provides you with a variety of static and
dynamic wallpaper, in the standby screen, click the menu button, click on the
"wallpaper" tab, select the interface into the system wallpaper settings.
Theme and desktop settings: The machine provides you with a variety of
convenient widget applications. In the standby screen, press the Menu key, select
widget option. Press and hold the widget needs to be placed on standby desktop,

20 /28
and then to select the desired placement of the interface by swiping left or right, to
finalize the widget set according to the prompt (You can also press and frequently
used applications directly onto the standby interface).
Mobile / Uninstall / desktop viewing application message:
1. idle screen, press and hold an application icon to the need to move on other
pages, and then swipe left or right to select the desired position and page
placement.
2. On the desktop stand Long press an icon, drag it to the desktop is placed above
the red font "uninstall" you can uninstall an application.
[Description]
Phone basic application cannot be uninstalled
3. In all program interface long press an icon, drag it to the desktop placed
"Applications Information", you can view information about the application;