AP&T AP-AC2459 User manual

AP&T
Shanghai Anping Static Technology Co.,Ltd
(1) To ensure the good performance of the device, user should clean the electrode
every 5-7 days after using. Use a clean cloth dipped in alcohol to remove carbon
deposition on discharge electrode and cover net (Notice: This operation must be
done 10 minutes after the power is shut down. Restart must be done when
alcohol completely volatile after cleaning. Do not use any organic solvents to
clean the air blower)
(2) Do not over press and rotate the control button/knobs on front panel. It may
cause permanent damage to the device.
(3) Stop using the device when power indication LED turns off. Re-use is
available only when after check and repair by professionals
7. After-sale service ***********************************
(1). AP-AC2459 desktop ionizing air blower is strictly inspected before ex-work
and matches the entire related technical standard indicated in this manual.
(2). Warranty：Repair or change any damaged parts caused by quality reasons free
of charge within one year from the date of purchase after we confirm the quality
issue. But the promise is not fit for the following situation: Alternation of the
device, wrongly used or incorrect installation, abasement; negligence and
accidental damage; unpacking and repacking by user itself or maintain by other
unauthorized service department.
(3). AP&T is free from any related responsibility of products except the parts
repair and replacement specified here above.
8. Accessories ****************************************
(1) User manual
(2) Warranty card
(3) Inspection certificate
AP&T
Shanghai Anping Static Technology Co.,Ltd
Cross flow Ionizing Air Blower AP-AC2459
1.General ****************************************
AP-AC2459 cross flow ionizing air blower is one of the ion blower series
manufactured by Shanghai Anping Static Science & Technology Co.,Ltd.,
AP-AC2459 cross flow ionizing air blower ionizes the air and generates large
volume of positive and negative ions by AC high-voltage corona discharge.
These ions will be blown to object surface and remove static.
The device can be widely used in electronics, plastic, chemical, printing and
optoelectronics industries.
2.Features****************************************
(1) Faster static eliminating speed and lower average voltage
(2) Wide range of ion airflow with large cover area
(2) Stepless fan speed adjustment with stable performance. Easy for cleaning and
maintaining
(4)Installing angles adjustable. Flexible switching between cold and warm air
flow.

AP&T
Shanghai Anping Static Technology Co.,Ltd
3. Specifications ***********************************
Model AP-AC2459
Input voltage AC 220V /50Hz or 110V/60 Hz
Power 50W/250W (heating)
Ion balance ≤ |±10V | (300mm testing center from the air outlet)
Discharge speed ≤ 2s (300mm testing center from the air outlet)
Effective range 600×1200mm (W*L)
Air volume 70~120CFM
Noise ≤ 50-55db (150mm from the air outlet)
Ozone thickness ≤ 0.03 ppm (150mm from the air outlet)
Working temperature 0~50°C
Dimension 454*216*185mm（L*W*H）
Net weight 7.4kg
Gross weight 8.2kg (including accessories)
4. Safety warning ***********************************
(1) Read this manual carefully before installing and using of the device.
(2) Do not use this equipment in the environment where the humidity is greater
than 85%.
(3) Do not insert any object into the air input entry and outlet
(4) It is strictly prohibited to use this equipment in combustible and explosive
environment.
(5) Internal maintenance and repair must be carried out by professionals
AP&T
Shanghai Anping Static Technology Co.,Ltd
5. Installation ********************************
1. Dimensional diagram
2. Positioning

AP&T
Shanghai Anping Static Technology Co.,Ltd
3/F, Building 27, No.69, Gui Qing Road, Shanghai, China
Tel：[phone]
Fax：[phone]
AP&T
Cross Flow
Ionizing Air Blower
AP-AC2459
User Manual
Shanghai Anping Static Technology Co., LTD