AP&T AP-DC2451-001 User manual

Shanghai Anping Static Technology Co.,Ltd
3/F, Building 27, No.69, Guiqing Road, Shanghai, China
Tel：[phone]
Fax：[phone]
www.ap-static.cn
AP-DC2451-001
IONIZING AIR BLOWER
User Manual
Shanghai Anping Static Technology Co.,Ltd

6. Warranty and After Sales Service
(1)AP-DC2451-001 ionizing air blowers are strictly inspected before
ex-work and match all the related technical standard indicated in
this manual.
(2)AP&T PROMISE ：Repair or change any damaged parts caused
by quality reasons free of charge within one year from the date of
purchase after we confirm the quality issue.
(3)Above promise is not fit for the following situation：Alternation
of the device, wrongly used, incorrect installation, abasement,
negligence, accidental damage, wrong input voltage, unpacking
and repacking by user itself or maintain by other unauthorized
service department.
(4)AP&T is free from any related responsibility of using the product
except the parts specified here above.
7. Caution：
(1)In order to guarantee the blower to work with good technical
feature, user should clear the sediment on electrode sharp slightly
with brush pen every 5-7 days under normal operation.
A. Must be done 10 minutes after power switched off.
B. Alloy electrode is consumable without warranty,and cost is chargeable
when change.
(2)User should not over turn the air volume adjust knob.Permanent Damage
caused by this operation will be beard by the operator.
1. General
AP-DC2451-001 ionizing air blower is a member of the ionizing
blower product series manufactured by Shanghai Anping Static
Science&Technology Co.,Ltd, which is a reliable and high efficient
device in providing static removing for the objective surface.
AP-DC2451-001 applies the latest technology of ionization model in
the world. It generate both polarity ion and arrive the object surface
where the static to be eliminated most equally. Eliminate static
effectively and control the remaining static well.
AP-DC2451-001 is widely used in electronics、plastic、chemical、
printing and optics industry etc.
2. Features
(1)Big volume of ion generating and fast speed of static removing.
(2)Applies commutating, filtrating circuit with low voltage and high
reliability.
(3)Front and back cover net unloadable and easy for maintenance.
(4)DC working voltage with low power consumption and long
product life.
(5)Internal power generator.
(6)Auto cleaning when power on.Auto clean electrode every 24 hours
(7) stepless regulation for fan speed
AP&T
AP-DC2451-001

3. Specification
Model AP-DC2451-001
Input voltage AC 220V/50HZ or 110V/60HZ
Power 12W
Ion balancing ≤|±10V|（300mm from blower）
Discharge time ≤2s （300mm from blower）
Effective scope 600×1200mm
Air volume(Adjustable) 0~95 CFM
Noise ≤45db (150mm from air outlet)
Ozone thickness ≤0.02 ppm (150mm from air outlet)
Working temperature 0°C - 50°C
Weight 1520g
Dimension 196×180×64（mm）
4. Installation
When using AP-DC2451-001 ionizing air blower ，the air
transmitter should be vertical to the object which static to be
removed. The trestle should be fixed on stable and plain surface
such as wall by screw and nut.
AP-DC2451-001
ionizing air blower should be put near working area or
300~900mm to the objective. By screw the knob on both side of
the trestle the horizontal angle can be adjusted so that the optimal
effect of static removing can be achieved.
Installation instruction:
(1)Insert the power cord to the
power socket at the back
side of the blower.
(2)Switch on the power.
(3)Turn the air volume control
knob to proper value to
reach optimal effect.
Positioning
Desktop vertical suspended Oblique suspended Table clamping
5. Safety
(1) Be aware to read this user manual carefully before install and use
this device.
(2)Do not locate this device in the environment with high moisture.
(3)Do not insert any object into air input entry and output exit.
(4)Don’t use this device in the flammable and explosive surrounding.
(5)Internal maintenance and repairing must be done by professional
engineers.
(6)When the brush is on electrode,please reboot and make sure brush
is suspension