Apantac DA-SDI-HDTV User manual

DA-SDI-HDTV
USER MANUAL
SDI to HDMI/DVI
CONVERTER w/o
SCALER
Package Contents
 DA-SDI-HTDV
 User Manual
 Power Supply (5V 3.2A)
 Stereo Phone Jack (1 x 2)
 75 Ω Terminator
 RJ45 to HDMI Adapter (6”)
 RJ45 to DVI Adapter (6”)
 Power Supply Fastener
 Magnetic Mounting Plate
 Mounting Screws
Features
 Supports 3G /HD/SD-SDI input
 2 3G/HD/SD-SDI looping outputs
 Supports 16 channels of embedded audio
 AES and Analog audio monitoring output
 Rotary switch to select the AES/AA pair for monitoring
 Built-in RJ45 extender outputs
 Up to 35 feet when used with HDMI-SR/DVI-SR
 Up to 115 feet when used with HDMI-1-R/DVI-1-LR
 Comes with HDMI or DVI adapters to accommodate
different displays

Specifications
MODEL DA-HDTV-SDI
DESCRIPTION SDI to HDMI/DVI Converter
with 2 Looping Input and
INPUT 1 x SDI
OUTPUT 2 x SDI (loop-out), 1 Stereo
Audio (Phone Jack), AES
ADJUSTMENTS Rotary dial for audio monitor-
ing selection
MAXIMUM RESOLUTION 1920x1080p.
MOUNT Magnetic
POWER 5V 3.2A
DIMENSION 62 W x 112 D x 29 H (mm)
DA-SDI-HDTV FRONT VIEW
1. HDMI/DVI (RJ45) output
2. Rotary Switch for selecting audio monitoring pair
3. Analog Audio monitoring stereo phone jack
1. Status Indicator - Turns Green when powered
on, turns amber when SDI signal is locked on
DA-SDI-HDTV REAR VIEW
DA-SDI-HDTV TOP VIEW
1. Power Supply Fastener
2. 5V 3.2A Power Input
3. AES Audio output
4. SDI Loop out 2 (Terminator should be applied
when not in use)
5. SDI Loop out 1
6. SDI Input

Installation
 Connect the power supply and, if needed, lock the 5
VDC power jack with the supplied accessories (There
is a small transparent plastic bag containing the PS
holder and screws (x2) as well as two other screws
for mounting the metal base).
 Use the RJ-45 to HDMI adapter cable, for HDMI moni-
tors, use the RJ-45 to DVI adapter cable, for DVI
monitors
 Turn the rotary switch for audio monitoring
 For example: position 1 = Group 1, channel 1 and 2,
position 2 = Group 2, channel 3 and 4 and so on ...
 Connect the SDI loop through, if needed
Supported Formats
Accessories
© 2012 APANTAC LLC, All rights reserved
7556 SW BRIDGEPORT ROAD
PORTLAND, OR 97224, USA
PHONE [phone], FAX [phone]
The content of this document are provided in connection with
Apantac LLC (“Apantac”) products. Apantac makes no
representation or warranties with respect to the accuracy or
completeness of the contents of this publication and reserves the
right to make changes to specifications and product descriptions
at any time without notice
Trouble Shooting Q&A
Q: There is no image on my DVI/HDMI
A: Your monitor may not support the right resolution.
The monitors must support 1920x1080, if the SDI
input is 1080i or 1080p
Q: There is no image on my monitor
A: If your SDI source is 50 Hz, your monitor may not
support 50 Hz
Q: There is no image on my monitor
A: Some monitor may not include the 5V necessary for
the HDMI/DVI hot plug function to work properly. If
you have eliminated the possibilities above, please
call tech support at Apantac.
Q: The image on my monitor looks really small
A: If the input is standard definition or 720p and the
monitor’s native resolution is 1920x1080 or 1920x1200,
you will need to switch the monitor to full screen mode,
instead of 1:1
Q: My input is 1080i, but the image on my monitor looks
squeezed.
A: Some monitors sees 1080i as 540p, so it displays only
540 lines instead of 1080. Please consult the monitor’s
user manual.
SDI INPUT HDMI/DVI OUTPUT
1080p60 1920x1080p 60Hz
1080p59.94 1920x1080p 59.94Hz
1080p50 1920x1080p 50Hz
1080i60 1920x1080i 60Hz
1080i59.94 1920x1080i 59.94Hz
1080i50 1920x1080i 50Hz
720p60 1280x720p 60Hz
720p59.94 1280x720p 59.94Hz
720p50 1280x720p 50Hz
480i59.94 1440x480i 59.94Hz
576i50 1440x576i 50Hz
Power Adapter Stereo Phone Jack (1 x 2)
Power Adapter
Fastener
75 Ω Terminator Mounting Screws
RJ-45 to HDMI Adapter RJ-45 to DVI Adapter