Apantac HDMI-IP-E User manual

HDMI-IP-E and HDMI-IP-R
QUICK START GUIDE
Visit%www.apantac.com%for%the%full%Manual%
(H.264 Encoder / Decoder SET)
%
%
%
%
What’s in the Box
Note: HDMI-IP-E and HDMI-IP-R can also be sold
separately
1 x HDMI-IP-E (Encoder)
1 x HDMI-IP-R (Decoder)
2 x IR Emitter Cable
2 x 12V DC Power supplies
1 x Quick START Guide
© 2016 APANTAC LLC, All rights reserved
7470 SW BRIDGEPORT ROAD
PORTLAND, OR 97224, USA
PHONE [phone], FAX [phone]
The content of this document are provided in connection with
Apantac LLC (“Apantac”) products. Apantac makes no
representation or warranties with respect to the accuracy or
completeness of the contents of this publication and reserves
the right to make changes to specifications and product
descriptions
Key Features%
– HDMI 1.4 (1080P) to H.264 encoder and
decoder
– Supports one pair of HDMI embedded audio
– Supports both Unicast and Multicast
– Supports up to 1080P@60Hz at 18Mbps
– Supports point to point up to 100 meters
– Compatible with CAT 5/E/6 cables
– Supports RS-232
– HDMI and HDCP compliant
– Web interface for basic configuration
%
Specifications
Functions/Part#
HDMI-IP-E
HDMI-IP-R
HDMI Input
Connector
1 (HDMI
Type A)
None
HDMI Input Color
Space
HDMI: RGB 8/10/12 bit,
YCbCr 4:2:2/4:4:4 8/10/12
bit, DVI:RGB/YCbCr
4:2:2/4:4:4 8 bit
HDMI Output
Connector
1 (HDMI Type A)
HDMI Output Color
Space
YCbCr
4:4:4
RGB
HDMI Output Max.
Resolution
1080P@60Hz (8 bit)
LED Indicators
Power
LINK
Rj-45
IR In
None
3.5 mm jack
IR Out
3.5 mm
jack
None
IR Carrier Frequency
20KHz ~ 60KHz
Baud Rate Settings
3 PIN DIP Switch
ID DIP Switch
8 PIN DIP Switch
CAT 5E cable
distance
100 meters maximum
RS-232 connector
DB9 Female
Baud Rate
2400 up to 115,200 bps;
data bits, 1 stop bit, no
parity
Weight
338 g
Dimension (LxW-H)
120x75x33 mm
%
Front/Rear View
%
HDMI-IP-E (Encoder)
%
1. HDMI Loop out. (YCbCr 4:4:4)
2. HDMI Input
3. Multicast ID DIP Switch
4. Power (12 V DC 2A)
%
1. LED power indicator
2. System reset
3. Baud rate setting DIP Switch
4. IR out
5. RS-232
6. LINK
%
HDMI-IP-R(Decoder)
%
1. HDMI Output
2. Multicast ID DIP Switch
3. Power (12 V DC 2A)
%
1. LED power indicator
2. System reset
3. Baud rate setting DIP Switch
4. IR out
5. RS-232
6. LINK

Supported Resolutions
Resolution
Frequency(Hz)
640x480
60
800x600
60
1024x768
60
1280x768
60
1280x800
60
1280x960
60
1280x1024
60
1360x768
60
1366x768
60
1440x900
60
1400x1050
60
1440x1050
60
1600x900
60
1680x1050
60
480i
59.94/60
480p
59.94/60
576i
50
576p
50
1080i
50/59.94/60
1080p
23.98/24/25/29.98/30/50/59.94/60
720p
50/59.94/60
Point to point connection
1. Turn off the HDMI source and HDMI Display
2. Connect the cable between the source and
the HDMI-IP-E via the HDMI in port
3. Connect the HDMI cables between the
Displasy and the HDMi-IP-E and HDMI-IP-R
4. Connect the CATx cable between the HDMI-
IP-E and HDMI-IP-R
5. Make sure the ID DIP Switch is set the same
6. Connect the power to both HDMI-IP-E and
HDMI-IP-R
7. Turn on the the power for the HDMI Displays
Point to Multi-point connection
1. Turn off the HDMI source and HDMI Display
2. Connect the cable between the source and
the HDMI-IP-E via the HDMI in port
3. Connect the HDMI cables between the
Displasy and the HDMi-IP-E and HDMI-IP-R
4. Connect the CATx cables between the HDMI-
IP-E and the switch
5. Connect the CATx cables between the HDMI-
IP-R and the switch
6. Make sure the ID DIP Switch is set the same
7. Connect the powers to both HDMI-IP-E and all
the HDMI-IP-R’s
8. Turn on the the power for the HDMI Displays
Multiple transmitters to multiple
receivers
1. Turn off the HDMI sources and HDMI Display
2. Connect the cable between the sources and
all the HDMI-IP-E via their HDMI in ports
3. Connect the HDMI cables between the Display
and all the HDMi-IP-E’s and HDMI-IP-R’s
4. Connect the CATx cables between all the
HDMI-IP-E’s and the switch
5. Connect the CATx cables between all the
HDMI-IP-R’s and the switch
6. Make sure the ID DIP Switch is set the same
7. Connect the powers to both HDMI-IP-E’s and
all the HDMI-IP-R’s
8. Turn on the the powers for the HDMI Displays
DIP Switches
ID
PIN1
PIN2
PIN3
PIN4
PIN5
PIN6
PIN7
PIN8
0
OFF
OFF
OFF
OFF
OFF
OFF
Not
Used
Reset
1
ON
OFF
OFF
OFF
OFF
OFF
OFF
:
:
:
:
:
:
Wait
7
ON
ON
ON
:
:
:
3
Sec.
:
:
:
:
:
:
:
ON
63
ON
ON
ON
ON
ON
ON
Baud Rate
PIN 1
PIN 2
PIN3
2400
OFF
OFF
OFF
4800
ON
OFF
OFF
9600
OFF
ON
OFF
19200
ON
ON
OFF
28800
OFF
OFF
ON
38400
ON
OFF
ON
57600
OFF
ON
ON
115200
ON
ON
ON