Appro LC-7513 User manual

Before trying to connect or operate this product, please read this manual completely
INSTALLATION &
OPERATION MANUAL
IP CAMERA
LC-7513 / LC-7523/ LC-7533 / LC-7553

1
Table Of Contents
SAFETY PRECAUTIONS .............................................................................3
1. PRODUCT FEATURES.............................................................................4
1.1 PRODUCT INSTRUCTIONS.....................................................................4
1.2 PRODUCT FEATURES ...........................................................................5
2. DESCRIPTION OF THE SURFACE .........................................................6
2.1 THE LC-7513 IP BOX CAMERA (POE)..................................................6
2.2THE LC-7523/7533 FIXED IP INDOOR/ OUTDOOR MINI-DOME (POE)
................................................................................................................8
2.3THE LC-7553 BULLET IP CAMERA INDOOR/OUTDOOR (POE) ...............9
2.4THE RESET BUTTON ..........................................................................11
2.5THE ALARM WIRING DIAGRAMS ...........................................................12
2.6THE USB FUNCTION ..........................................................................15
3. INSTALLATION ......................................................................................16
3.1 HARDWARE INSTALLATION..................................................................16
3.2 THE INSTALLATION OF THE FIXED IP INDOOR MINI-DOME (POE)...........17
3.3THE INSTALLATION OF THE FIXED IP OUTDOOR MINI-DOME (POE) .......18
3.4 PLACING A DESICCANT PACK INSIDE THE CAMERA...............................19
3.5 UPDATING SYSTEM SOFTWARE...........................................................20
4. Network Configuration..........................................................................21
4.1 CABLE CONNECTIONS........................................................................21
4.1.1 Connect to a computer ......................................................................................................................21
4.1.2 Connect to a LAN Hub (INTRANET) .............................................................................................21
4.2 CONFIGURE YOUR IP CAMERA NETWORK SETTINGS ...........................22
4.2.1 Enable DHCP Function.....................................................................................................................22
4.2.2 Set IPAddress ...................................................................................................................................22

2
4.3 TCP/IP COMMUNICATION SOFTWARE.................................................23
4.4 TCP/IP INSTALLATION .......................................................................25
4.5 TCP/IP CONFIGURATION SETTING ......................................................26
4.6 CONNECTION TESTING.......................................................................27
5. Operating Instructions for Image Software and Network..................29
5.1 MICROSOFT INTERNET EXPLORER ......................................................30
5.1.1 Connecting the IP camera ................................................................................................................30
5.1.2 Live Video........................................................................................................................................31
5.1.3 Setup.................................................................................................................................................35
6. ADVANCED OPERATION......................................................................88
7. SPECIFICATIONS...................................................................................91
8. Functions of client PC...........................................................................93
APPENDIX 1. –How to run IP Camera UPnP...........................................94
APPENDIX 2. –Register as a DDNS member ........................................104

3
SAFETY PRECAUTIONS
All the following safety and operational instructions to prevent harm or injury to the operator(s) or
other persons should be read carefully before the unit is activated.
WARNING
 To prevent fire or shock hazard, avoid exposing this unit to rain or moisture.
 Do not block ventilation openings.
 Do not place anything on top of the unit that might spill or fall into it.
 Do not attempt to service this unit yourself, as opening or removing covers ma
y
expose you to dangerous voltage or other hazards. Please refer all servicing to
your distributor/ retailer.
 Do not use liquid cleaners or aerosols for cleaning.
 To prevent fire or electric shock, do not overload wall outlets or extension cords.
 PoE warning : If the PoE injector is used instead of the supplied power adaptor, all
of the wiring to and from the injector must be routed/ installed inside a building
/
plant and never routed/ installed outside of the building/ plant.
 Please only select a power adapter or power certified by UL and marked at 24Vac
/ 60 Hz, minimum 1A, class 2 or LPS.
 The IP Box Camera and the Indoor Mini-dome are for Indoor use only.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

4
1. PRODUCT FEATURES
1.1 Product Instructions
This IP camera series is a high performance mega-pixel network camera which is equipped with a
high resolutions OV 2M CMOS sensor and a resolution of up to 1920x1080 (FULL HD). This
powerful new series enables you to see fresh images in fine detail aided by a spectrum of high
resolutions. In addition the series is equipped with the dynamic H.264 video compression format,
the compression codec which ensures top image quality at a low bit rate. The 3GPP installed
mobile phone helps you see live scenes via the Internet as well. And this series provides you with
freshly designed, simultaneous video codec streams of H.264, MPEG4 and MJPEG. This function,
the multi-profile function, can simultaneously use different rates of resolutions while allowing
maximum 3 video codecs to connect with computers at the same time. This IP camera not only
offers the highest resolutions in images in the field, but also dayand night, pre- and post-alarm, and
ePTZ functions.
Following are the special powers featured in this series.
FULL HD / 1920x1080 pixels
The series lets you view the video feed with a large field of high resolutions at FULL HD /
1920x1080 pixels that provide you with clear images in great detail.
H.264 compression
Currently, the H.264 is the most common and dynamic video compression format and a powerful
compression codec which delivers superior image quality at a low bit rate.
3GPP
Users can view a live scene via the Internet with a 3GPP installed mobile phone.
(Note: The 3G network bandwidth is limited; you can't use too large video size on your cell phone.)
Video Settings:
 Video Profile 1
 Maximum frame rate: 3 fps
 Intra Frame Period: 1 S
 Constant bit rate: 64 Kbps

5
In short, the series provides quality images and professional surveillance functions for
comprehensive security applications.
1.2 Product Features
 Adopts TI TMS320DM368 digital media processor.
 OmniVision 2M CMOS sensor.
 Simultaneous H.264, MPEG4 and MJPEG video compression.
 Three multi-profile applications: Selectable resolutions, frame rates, qualities, and image
chopping.
 Built-in IR-cut filter provides high quality images in low light conditions.
 Two-way audio.
 3GPP mobile surveillance.
 Advanced motion detection ( 512 zones. Sensitivity: 0 -100 % ).
 Built-in SD / SDHC card for schedule and alarm recording.
 Supports ONVIF.
 Full range of power options: DC12V / AC24V / PoE ( IEEE 802.3af ).

6
2. DESCRIPTION OF THE SURFACE
2.1 The LC-7513 IP Box Camera (PoE)
Front Panel and Rear Panel:
-- Front Panel -- -- Rear Panel --
1
3
21/4＂-20UNC
1. Light Sensor: Registers the quality of light in the camera’s environment, and controls the iris
shuttle to provide better information concerning the light.
2. MICROPHONE: The IP Camera has an additional audio function. The device has a
microphone built into its front panel which records sound.
3. POWER indicator: Indicates the power status of the unit.
4. Plug Inlet: A DC 12V inlet that connects to an external power supply.
5. Plug Inlet: An AC 24V inlet that connects to an external power supply.
6. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps Ethernet
networks. PoE (Power over Ethernet) function: Provides power to the device via the same
cable as used for the network connection.
7. RESET: Recover to factory default. (Refer to section 2.4 The Reset Button.)
8. VIDEO OUT Connector: The connector provides the unit’s composite video signals to a
monitor. (This connector adjusts and improves the images.)
9. USB port: The user can use a USB device cable to connect the IP camera to the USB port on
the PC.
10.LED indicator: The green light indicates the unit is activating and the SD card cannot be
removed.
11.AUDIO IN: The connector is used to connect the audio output from other devices to the camera.
12.SD/ SDHC CARD slot: This is used for updating system software and archiving / accessing
critical images.
13.GPIO: This is a 6-PIN connector including the ALARM IN/OUT, RS-485, DC OUTPUT and
GROUND items for connecting with external devices.
14.AUDIO OUT: Provides the camera’s audio signal to a speaker or stereo.

7
Flank Panel:
IRIS
1. AES
2. DC IRIS
3. DHCP
4. STATIC IP
1
2
3
4
1.ALM-OUT A
2.ALM-OUT B
3.ALM-IN +
4.ALM-IN -
5.ALM-RST +
6.ALM-RST -
7.RS-485:D+
8.RS-485:D-
9.DC-OUT(5V)
10.GND
11.AUDIO-IN
12.AUDIO-OUT
12
1. IRIS: Auto iris connector.
This camera works with a DC drive auto iris lens. Please refer to the pin assignment
marked on the camera when connecting the auto iris lens
2. DIP Switch:
1. AES: Auto electric shutter.
2. DC IRIS: Use an auto iris (DC drive)
3. DHCP: Turn On / Turn Off to use the DHCP protocol. If the switch
points upwards, the device can obtain an IP address from
the DHCP server via the network.
4. STATIC IP: If the switch points down, the device can’t obtain an IP
address from the DHCP server. This option is needed
to configure the network communication settings.
(*In the default factory configuration, this DIP Switch is in the Down
position.)

8
12 3 456 7
8
9
10
12 3 456 7
8
9
10
2.2 The LC-7523/7533 Fixed IP Indoor/ Outdoor Mini-Dome (PoE)
1. Plug Inlet: A DC 12V inlet that connects to an external power supply.
2. Plug Inlet: An AC 24V inlet that connects to an external power supply.
3. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps
Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the
same cable as used for the network connection.
4. AUDIO IN: The connector is used to connect the audio output from other devices to the
camera.
5. VIDEO OUT Connector: The connector provides the unit’s composite video signals to a
monitor. (This connector adjusts and improves the images.)
6. AUDIO OUT: Provides the camera’s audio signal to a speaker or stereo.
7. GPIO: This is a 6-PIN connector including the Digital output/input, DC output and
GROUND items for connecting with external devices.
8. USB port: The user can use a USB device cable to connect the IP camera to the USB port on
the PC.
9. SD/ SDHC CARD slot: This is used for updating system software and archiving / accessing
critical images.
10. RESET: Recover to factory default. (Refer to section 2.4 The Reset Button.)