AprioMed Bonopty 250 User manual

Ergonomic grip for
faster drilling
Indication for use
Intended for use in the drilling procedure
together with Bonopty® Bone Biopsy System
• Transfers and enhances ngerp force
to reduce drilling procedure me
• Ergonomic grip ensures full control
while preserving taclity and precision
• Universal aachment ts both
Bonopty® 12g and Bonopty® 14g drill
ADAPTER 1:3 REVOLUTIONS

ORDERING INFORMATION
Product number Product descripon Minimum Order Quanty
250 Bonopty® Adapter 1:3 Revoluons 5 units
29246 Rev 3 2019-05
Indicaon for use: Intended for use in the drilling procedure together with Bonopty® Bone Biopsy System.
Before using Bonopty® Adapter 1:3 Revoluons read the instrucons for use which accompany the product
for indicaons, contraindicaons, warnings and precauons.
Bonopty® is a registered trademark of AprioMed AB. Patents pending.
HEAD OFFICE
AprioMed AB
Virdings Allé 28
SE-754 50 Uppsala, Sweden
Phone: [phone]
Free Fax (Int’l): [phone] inf[email protected] / www.apriomed.com
US SALES OFFICE
AprioMed, Inc.
45 South Main St Unit 2
Derry, NH 03038, USA
Phone: [phone]
Fax (US toll free): 866 239 179
APRIOMED develops, manufactures, markets and sells innovave medical devices and related services within the eld of intervenonal radiology. We aim to deliver, in close collaboraon with healthcare
praconers, innovave quality tools to achieve the most favourable soluons for radiologists worldwide. AprioMed is headquartered in Uppsala, Sweden, with a sales subsidiary in Londonderry, NH, USA. Our
products are sold in more than 40 countries by AprioMed (direct sales in US, UK, Ireland and Sweden) and our local distributors.
Replace stylet with
eccentric drill.
Rotate a few turns unl
drill p cathces the
bone.
Verify posion and
direcon using
diagnosc imaging.
Retract penetraon
cannula to expose drill
p beyond penetraon
cannula to allow the
eccentric movement of
the drill.
abc
Press penetraon
cannula with stylet
down to bone.
Aach Bonopty Adapter 1:3 Revoluons to the
drill hub.
Grip the base of the adapter using nger and
thumb grip.
Turn the top of the adapter and feel the
eccentric drill turning. Use moderate pressure
only.
Aer drill has passed through corcal bone,
anchor penetraon cannula 2-3 mm into
cortex.
Remove drill and adapter.
2
Start procedure as per normal routine.
1
3Insert biopsy needle through the anchored cannula and connue procedure as per normal roune.
Using Bonopty®Adapter
1:3 Revoluons, one
complete turn of the top
of the handle...
...corresponds to three
turns of the drill p
USE OF BONOPTY® ADAPTER 1:3 REVOLUTIONS