Apulsetech a712 User manual
Scans barcodes by emitting a red laser when you
press the related button.
α712 LED indicator indicates the charging status of the battery
inserted into the product.
Before removing the battery, turn o the power. Failure to do
so it may cause damage to the device.
Quick Guide
2
Phone
Power AdapterPower Cable
Battery
w
F
b/w
n/h
u/s
w
F
b/w
n/h
u/s
Scanner
w
F
b/w
n/h
u/s
The images may dier from your actual items. To purchase
additional accessories, contact your sales representative. You
can download latest version of Quick guide from www.apul-
setech.com
1.3 Installing and Replacing the Battery
α712 uses Lithium-ion rechargeable battery.
When charging only α712 body with DC Adapter
When charging α712 and Mobile phone at the same time with
DC Adapter ( USB option only )
1.5 Charging the Battery
To charge α712 uses USB cable or a docking cradle with the appropriate
power supply. You can also charge the battery by connecting it to
computer with USB cable.
Check the α712 is turned “ON”
If α712 turns o, Smart Phone cannot be charged.
1.6 Battery Charge Status
Battery LED Charging Indicator
2. α712 Overview
2.1 Top view
2.3 Display Screen Conguration
No. Item Description
2D Scanner
2.2 Bottom view
No. Item Description
1Port USB Client/ RS-232
Extension I/O
Allows the device to be connected to PC or other
device.
Charge the equipment
Phone
Connector
Charging USB
Connector
No. Item Description
Press Power key more than 3 seconds.
To turn α712 on
Press Power key for 2-3 seconds to power on.
Using provided charging adapter (5V/3A) is highly recom-
mended.
∙ α712 Device
∙ Power adapter
∙ USB cable
∙ Power cable
∙ Quick guide
∙ Docking Cradle (Optional)
∙ Flourish LAMA (Optional)
∙ Battery
2
USB/Bluetooth/WIFI connection mode indication
Disconnect/HID/Serial connection mode indication
This mode allows 1D/2D barcodes to be read in.
This mode allows you to read RFID tags.
Shows the time.
Shows the remaining amount of the battery.
Displays the device status light. When the barcode
scan is ready, B.ScanReady appears
When RFID scan is ready, R.Scan Ready is displayed.
When data is read, the tag value is displayed in the
center, and the number of read tags is displayed in
the lower left corner.
Connection
mode
Connection
status indication
Battery
state
Time
RFID Mode
Barcode Mode
1. Connection Mode
3. Barcode Mode
4. RFID Mode
2. Connection State Display
6. Battery
5. Time
7. State Display
Power Button
1. Getting Started
The α712 (RFID UHF Reader) is a high performance UHF reader
connecting to almost any mobile device. WIFI, Bluetooth, Serial or USB
connections can be chosen in order to link to PC, Android or iPhone
device.
Optional 2D barcode scanner engine from Zebra is available to capture
1D/2D barcode data and multitask on PC or mobile phone eciently.
Users are able to experience highest working performance with α712.
Instructions in this manual are based on default settings, and
may vary from your device, depending on the software
version on your device, and any changes to the device’s
Settings. All screen images in this manual are simulated.
Actual displays may vary, depending on the software version
of your device and any changes to the Settings.
This guide uses the following symbols to indicate hazards and
additional information.
1.1 About This Guide
Symbols
Symbol Name
Warning Implies information that could result in
serious injury to yourself or others.
Implies information that may result in minor
or serious product damage.
Implies information that can help you get more
important than surrounding text, such as
exceptions or additional information.
Caution
Note
Description
Your α712 packing box includes the following items
1.2 Packing Contents
1.4 Switching α712 on or o
To turn α712 o
It may turn o if pressing the key more than 5 seconds.
When charging through Docking Cradle (Option only )
α712 Charging : RED LED ON
α712 Charging completed : GREEN LED ON
Scans barcodes by emitting a red laser when you
press the related button.
α712 LED indicator indicates the charging status of the battery
inserted into the product.
Before removing the battery, turn o the power. Failure to do
so it may cause damage to the device.
Quick Guide
2
Phone
Power AdapterPower Cable
Battery
w
F
b/w
n/h
u/s
w
F
b/w
n/h
u/s
Scanner
w
F
b/w
n/h
u/s
The images may dier from your actual items. To purchase
additional accessories, contact your sales representative. You
can download latest version of Quick guide from www.apul-
setech.com
1.3 Installing and Replacing the Battery
α712 uses Lithium-ion rechargeable battery.
When charging only α712 body with DC Adapter
When charging α712 and Mobile phone at the same time with
DC Adapter ( USB option only )
1.5 Charging the Battery
To charge α712 uses USB cable or a docking cradle with the appropriate
power supply. You can also charge the battery by connecting it to
computer with USB cable.
Check the α712 is turned “ON”
If α712 turns o, Smart Phone cannot be charged.
1.6 Battery Charge Status
Battery LED Charging Indicator
2. α712 Overview
2.1 Top view
2.3 Display Screen Conguration
No. Item Description
2D Scanner
2.2 Bottom view
No. Item Description
1Port USB Client/ RS-232
Extension I/O
Allows the device to be connected to PC or other
device.
Charge the equipment
Phone
Connector
Charging USB
Connector
No. Item Description
Press Power key more than 3 seconds.
To turn α712 on
Press Power key for 2-3 seconds to power on.
Using provided charging adapter (5V/3A) is highly recom-
mended.
∙ α712 Device
∙ Power adapter
∙ USB cable
∙ Power cable
∙ Quick guide
∙ Docking Cradle (Optional)
∙ Flourish LAMA (Optional)
∙ Battery
2
USB/Bluetooth/WIFI connection mode indication
Disconnect/HID/Serial connection mode indication
This mode allows 1D/2D barcodes to be read in.
This mode allows you to read RFID tags.
Shows the time.
Shows the remaining amount of the battery.
Displays the device status light. When the barcode
scan is ready, B.ScanReady appears
When RFID scan is ready, R.Scan Ready is displayed.
When data is read, the tag value is displayed in the
center, and the number of read tags is displayed in
the lower left corner.
Connection
mode
Connection
status indication
Battery
state
Time
RFID Mode
Barcode Mode
1. Connection Mode
3. Barcode Mode
4. RFID Mode
2. Connection State Display
6. Battery
5. Time
7. State Display
Power Button
1. Getting Started
The α712 (RFID UHF Reader) is a high performance UHF reader
connecting to almost any mobile device. WIFI, Bluetooth, Serial or USB
connections can be chosen in order to link to PC, Android or iPhone
device.
Optional 2D barcode scanner engine from Zebra is available to capture
1D/2D barcode data and multitask on PC or mobile phone eciently.
Users are able to experience highest working performance with α712.
Instructions in this manual are based on default settings, and
may vary from your device, depending on the software
version on your device, and any changes to the device’s
Settings. All screen images in this manual are simulated.
Actual displays may vary, depending on the software version
of your device and any changes to the Settings.
This guide uses the following symbols to indicate hazards and
additional information.
1.1 About This Guide
Symbols
Symbol Name
Warning Implies information that could result in
serious injury to yourself or others.
Implies information that may result in minor
or serious product damage.
Implies information that can help you get more
important than surrounding text, such as
exceptions or additional information.
Caution
Note
Description
Your α712 packing box includes the following items
1.2 Packing Contents
1.4 Switching α712 on or o
To turn α712 o
It may turn o if pressing the key more than 5 seconds.
When charging through Docking Cradle (Option only )
α712 Charging : RED LED ON
α712 Charging completed : GREEN LED ON
Scans barcodes by emitting a red laser when you
press the related button.
α712 LED indicator indicates the charging status of the battery
inserted into the product.
Before removing the battery, turn o the power. Failure to do
so it may cause damage to the device.
Quick Guide
2
Phone
Power AdapterPower Cable
Battery
w
F
b/w
n/h
u/s
w
F
b/w
n/h
u/s
Scanner
w
F
b/w
n/h
u/s
The images may dier from your actual items. To purchase
additional accessories, contact your sales representative. You
can download latest version of Quick guide from www.apul-
setech.com
1.3 Installing and Replacing the Battery
α712 uses Lithium-ion rechargeable battery.
When charging only α712 body with DC Adapter
When charging α712 and Mobile phone at the same time with
DC Adapter ( USB option only )
1.5 Charging the Battery
To charge α712 uses USB cable or a docking cradle with the appropriate
power supply. You can also charge the battery by connecting it to
computer with USB cable.
Check the α712 is turned “ON”
If α712 turns o, Smart Phone cannot be charged.
1.6 Battery Charge Status
Battery LED Charging Indicator
2. α712 Overview
2.1 Top view
2.3 Display Screen Conguration
No. Item Description
2D Scanner
2.2 Bottom view
No. Item Description
1Port USB Client/ RS-232
Extension I/O
Allows the device to be connected to PC or other
device.
Charge the equipment
Phone
Connector
Charging USB
Connector
No. Item Description
Press Power key more than 3 seconds.
To turn α712 on
Press Power key for 2-3 seconds to power on.
Using provided charging adapter (5V/3A) is highly recom-
mended.
∙ α712 Device
∙ Power adapter
∙ USB cable
∙ Power cable
∙ Quick guide
∙ Docking Cradle (Optional)
∙ Flourish LAMA (Optional)
∙ Battery
2
USB/Bluetooth/WIFI connection mode indication
Disconnect/HID/Serial connection mode indication
This mode allows 1D/2D barcodes to be read in.
This mode allows you to read RFID tags.
Shows the time.
Shows the remaining amount of the battery.
Displays the device status light. When the barcode
scan is ready, B.ScanReady appears
When RFID scan is ready, R.Scan Ready is displayed.
When data is read, the tag value is displayed in the
center, and the number of read tags is displayed in
the lower left corner.
Connection
mode
Connection
status indication
Battery
state
Time
RFID Mode
Barcode Mode
1. Connection Mode
3. Barcode Mode
4. RFID Mode
2. Connection State Display
6. Battery
5. Time
7. State Display
Power Button
1. Getting Started
The α712 (RFID UHF Reader) is a high performance UHF reader
connecting to almost any mobile device. WIFI, Bluetooth, Serial or USB
connections can be chosen in order to link to PC, Android or iPhone
device.
Optional 2D barcode scanner engine from Zebra is available to capture
1D/2D barcode data and multitask on PC or mobile phone eciently.
Users are able to experience highest working performance with α712.
Instructions in this manual are based on default settings, and
may vary from your device, depending on the software
version on your device, and any changes to the device’s
Settings. All screen images in this manual are simulated.
Actual displays may vary, depending on the software version
of your device and any changes to the Settings.
This guide uses the following symbols to indicate hazards and
additional information.
1.1 About This Guide
Symbols
Symbol Name
Warning Implies information that could result in
serious injury to yourself or others.
Implies information that may result in minor
or serious product damage.
Implies information that can help you get more
important than surrounding text, such as
exceptions or additional information.
Caution
Note
Description
Your α712 packing box includes the following items
1.2 Packing Contents
1.4 Switching α712 on or o
To turn α712 o
It may turn o if pressing the key more than 5 seconds.
When charging through Docking Cradle (Option only )
α712 Charging : RED LED ON
α712 Charging completed : GREEN LED ON
Scans barcodes by emitting a red laser when you
press the related button.
α712 LED indicator indicates the charging status of the battery
inserted into the product.
Before removing the battery, turn o the power. Failure to do
so it may cause damage to the device.
Quick Guide
2
Phone
Power AdapterPower Cable
Battery
w
F
b/w
n/h
u/s
w
F
b/w
n/h
u/s
Scanner
w
F
b/w
n/h
u/s
The images may dier from your actual items. To purchase
additional accessories, contact your sales representative. You
can download latest version of Quick guide from www.apul-
setech.com
1.3 Installing and Replacing the Battery
α712 uses Lithium-ion rechargeable battery.
When charging only α712 body with DC Adapter
When charging α712 and Mobile phone at the same time with
DC Adapter ( USB option only )
1.5 Charging the Battery
To charge α712 uses USB cable or a docking cradle with the appropriate
power supply. You can also charge the battery by connecting it to
computer with USB cable.
Check the α712 is turned “ON”
If α712 turns o, Smart Phone cannot be charged.
1.6 Battery Charge Status
Battery LED Charging Indicator
2. α712 Overview
2.1 Top view
2.3 Display Screen Conguration
No. Item Description
2D Scanner
2.2 Bottom view
No. Item Description
1Port USB Client/ RS-232
Extension I/O
Allows the device to be connected to PC or other
device.
Charge the equipment
Phone
Connector
Charging USB
Connector
No. Item Description
Press Power key more than 3 seconds.
To turn α712 on
Press Power key for 2-3 seconds to power on.
Using provided charging adapter (5V/3A) is highly recom-
mended.
∙ α712 Device
∙ Power adapter
∙ USB cable
∙ Power cable
∙ Quick guide
∙ Docking Cradle (Optional)
∙ Flourish LAMA (Optional)
∙ Battery
2
USB/Bluetooth/WIFI connection mode indication
Disconnect/HID/Serial connection mode indication
This mode allows 1D/2D barcodes to be read in.
This mode allows you to read RFID tags.
Shows the time.
Shows the remaining amount of the battery.
Displays the device status light. When the barcode
scan is ready, B.ScanReady appears
When RFID scan is ready, R.Scan Ready is displayed.
When data is read, the tag value is displayed in the
center, and the number of read tags is displayed in
the lower left corner.
Connection
mode
Connection
status indication
Battery
state
Time
RFID Mode
Barcode Mode
1. Connection Mode
3. Barcode Mode
4. RFID Mode
2. Connection State Display
6. Battery
5. Time
7. State Display
Power Button
1. Getting Started
The α712 (RFID UHF Reader) is a high performance UHF reader
connecting to almost any mobile device. WIFI, Bluetooth, Serial or USB
connections can be chosen in order to link to PC, Android or iPhone
device.
Optional 2D barcode scanner engine from Zebra is available to capture
1D/2D barcode data and multitask on PC or mobile phone eciently.
Users are able to experience highest working performance with α712.
Instructions in this manual are based on default settings, and
may vary from your device, depending on the software
version on your device, and any changes to the device’s
Settings. All screen images in this manual are simulated.
Actual displays may vary, depending on the software version
of your device and any changes to the Settings.
This guide uses the following symbols to indicate hazards and
additional information.
1.1 About This Guide
Symbols
Symbol Name
Warning Implies information that could result in
serious injury to yourself or others.
Implies information that may result in minor
or serious product damage.
Implies information that can help you get more
important than surrounding text, such as
exceptions or additional information.
Caution
Note
Description
Your α712 packing box includes the following items
1.2 Packing Contents
1.4 Switching α712 on or o
To turn α712 o
It may turn o if pressing the key more than 5 seconds.
When charging through Docking Cradle (Option only )
α712 Charging : RED LED ON
α712 Charging completed : GREEN LED ON
Scans barcodes by emitting a red laser when you
press the related button.
α712 LED indicator indicates the charging status of the battery
inserted into the product.
Before removing the battery, turn o the power. Failure to do
so it may cause damage to the device.
Quick Guide
2
Phone
Power AdapterPower Cable
Battery
w
F
b/w
n/h
u/s
w
F
b/w
n/h
u/s
Scanner
w
F
b/w
n/h
u/s
The images may dier from your actual items. To purchase
additional accessories, contact your sales representative. You
can download latest version of Quick guide from www.apul-
setech.com
1.3 Installing and Replacing the Battery
α712 uses Lithium-ion rechargeable battery.
When charging only α712 body with DC Adapter
When charging α712 and Mobile phone at the same time with
DC Adapter ( USB option only )
1.5 Charging the Battery
To charge α712 uses USB cable or a docking cradle with the appropriate
power supply. You can also charge the battery by connecting it to
computer with USB cable.
Check the α712 is turned “ON”
If α712 turns o, Smart Phone cannot be charged.
1.6 Battery Charge Status
Battery LED Charging Indicator
2. α712 Overview
2.1 Top view
2.3 Display Screen Conguration
No. Item Description
2D Scanner
2.2 Bottom view
No. Item Description
1Port USB Client/ RS-232
Extension I/O
Allows the device to be connected to PC or other
device.
Charge the equipment
Phone
Connector
Charging USB
Connector
No. Item Description
Press Power key more than 3 seconds.
To turn α712 on
Press Power key for 2-3 seconds to power on.
Using provided charging adapter (5V/3A) is highly recom-
mended.
∙ α712 Device
∙ Power adapter
∙ USB cable
∙ Power cable
∙ Quick guide
∙ Docking Cradle (Optional)
∙ Flourish LAMA (Optional)
∙ Battery
2
USB/Bluetooth/WIFI connection mode indication
Disconnect/HID/Serial connection mode indication
This mode allows 1D/2D barcodes to be read in.
This mode allows you to read RFID tags.
Shows the time.
Shows the remaining amount of the battery.
Displays the device status light. When the barcode
scan is ready, B.ScanReady appears
When RFID scan is ready, R.Scan Ready is displayed.
When data is read, the tag value is displayed in the
center, and the number of read tags is displayed in
the lower left corner.
Connection
mode
Connection
status indication
Battery
state
Time
RFID Mode
Barcode Mode
1. Connection Mode
3. Barcode Mode
4. RFID Mode
2. Connection State Display
6. Battery
5. Time
7. State Display
Power Button
1. Getting Started
The α712 (RFID UHF Reader) is a high performance UHF reader
connecting to almost any mobile device. WIFI, Bluetooth, Serial or USB
connections can be chosen in order to link to PC, Android or iPhone
device.
Optional 2D barcode scanner engine from Zebra is available to capture
1D/2D barcode data and multitask on PC or mobile phone eciently.
Users are able to experience highest working performance with α712.
Instructions in this manual are based on default settings, and
may vary from your device, depending on the software
version on your device, and any changes to the device’s
Settings. All screen images in this manual are simulated.
Actual displays may vary, depending on the software version
of your device and any changes to the Settings.
This guide uses the following symbols to indicate hazards and
additional information.
1.1 About This Guide
Symbols
Symbol Name
Warning Implies information that could result in
serious injury to yourself or others.
Implies information that may result in minor
or serious product damage.
Implies information that can help you get more
important than surrounding text, such as
exceptions or additional information.
Caution
Note
Description
Your α712 packing box includes the following items
1.2 Packing Contents
1.4 Switching α712 on or o
To turn α712 o
It may turn o if pressing the key more than 5 seconds.
When charging through Docking Cradle (Option only )
α712 Charging : RED LED ON
α712 Charging completed : GREEN LED ON
Scans barcodes by emitting a red laser when you
press the related button.
α712 LED indicator indicates the charging status of the battery
inserted into the product.
Before removing the battery, turn o the power. Failure to do
so it may cause damage to the device.
Quick Guide
2
Phone
Power AdapterPower Cable
Battery
w
F
b/w
n/h
u/s
w
F
b/w
n/h
u/s
Scanner
w
F
b/w
n/h
u/s
The images may dier from your actual items. To purchase
additional accessories, contact your sales representative. You
can download latest version of Quick guide from www.apul-
setech.com
1.3 Installing and Replacing the Battery
α712 uses Lithium-ion rechargeable battery.
When charging only α712 body with DC Adapter
When charging α712 and Mobile phone at the same time with
DC Adapter ( USB option only )
1.5 Charging the Battery
To charge α712 uses USB cable or a docking cradle with the appropriate
power supply. You can also charge the battery by connecting it to
computer with USB cable.
Check the α712 is turned “ON”
If α712 turns o, Smart Phone cannot be charged.
1.6 Battery Charge Status
Battery LED Charging Indicator
2. α712 Overview
2.1 Top view
2.3 Display Screen Conguration
No. Item Description
2D Scanner
2.2 Bottom view
No. Item Description
1Port USB Client/ RS-232
Extension I/O
Allows the device to be connected to PC or other
device.
Charge the equipment
Phone
Connector
Charging USB
Connector
No. Item Description
Press Power key more than 3 seconds.
To turn α712 on
Press Power key for 2-3 seconds to power on.
Using provided charging adapter (5V/3A) is highly recom-
mended.
∙ α712 Device
∙ Power adapter
∙ USB cable
∙ Power cable
∙ Quick guide
∙ Docking Cradle (Optional)
∙ Flourish LAMA (Optional)
∙ Battery
2
USB/Bluetooth/WIFI connection mode indication
Disconnect/HID/Serial connection mode indication
This mode allows 1D/2D barcodes to be read in.
This mode allows you to read RFID tags.
Shows the time.
Shows the remaining amount of the battery.
Displays the device status light. When the barcode
scan is ready, B.ScanReady appears
When RFID scan is ready, R.Scan Ready is displayed.
When data is read, the tag value is displayed in the
center, and the number of read tags is displayed in
the lower left corner.
Connection
mode
Connection
status indication
Battery
state
Time
RFID Mode
Barcode Mode
1. Connection Mode
3. Barcode Mode
4. RFID Mode
2. Connection State Display
6. Battery
5. Time
7. State Display
Power Button
1. Getting Started
The α712 (RFID UHF Reader) is a high performance UHF reader
connecting to almost any mobile device. WIFI, Bluetooth, Serial or USB
connections can be chosen in order to link to PC, Android or iPhone
device.
Optional 2D barcode scanner engine from Zebra is available to capture
1D/2D barcode data and multitask on PC or mobile phone eciently.
Users are able to experience highest working performance with α712.
Instructions in this manual are based on default settings, and
may vary from your device, depending on the software
version on your device, and any changes to the device’s
Settings. All screen images in this manual are simulated.
Actual displays may vary, depending on the software version
of your device and any changes to the Settings.
This guide uses the following symbols to indicate hazards and
additional information.
1.1 About This Guide
Symbols
Symbol Name
Warning Implies information that could result in
serious injury to yourself or others.
Implies information that may result in minor
or serious product damage.
Implies information that can help you get more
important than surrounding text, such as
exceptions or additional information.
Caution
Note
Description
Your α712 packing box includes the following items
1.2 Packing Contents
1.4 Switching α712 on or o
To turn α712 o
It may turn o if pressing the key more than 5 seconds.
When charging through Docking Cradle (Option only )
α712 Charging : RED LED ON
α712 Charging completed : GREEN LED ON
Scans barcodes by emitting a red laser when you
press the related button.
α712 LED indicator indicates the charging status of the battery
inserted into the product.
Before removing the battery, turn o the power. Failure to do
so it may cause damage to the device.
Quick Guide
2
Phone
Power AdapterPower Cable
Battery
w
F
b/w
n/h
u/s
w
F
b/w
n/h
u/s
Scanner
w
F
b/w
n/h
u/s
The images may dier from your actual items. To purchase
additional accessories, contact your sales representative. You
can download latest version of Quick guide from www.apul-
setech.com
1.3 Installing and Replacing the Battery
α712 uses Lithium-ion rechargeable battery.
When charging only α712 body with DC Adapter
When charging α712 and Mobile phone at the same time with
DC Adapter ( USB option only )
1.5 Charging the Battery
To charge α712 uses USB cable or a docking cradle with the appropriate
power supply. You can also charge the battery by connecting it to
computer with USB cable.
Check the α712 is turned “ON”
If α712 turns o, Smart Phone cannot be charged.
1.6 Battery Charge Status
Battery LED Charging Indicator
2. α712 Overview
2.1 Top view
2.3 Display Screen Conguration
No. Item Description
2D Scanner
2.2 Bottom view
No. Item Description
1Port USB Client/ RS-232
Extension I/O
Allows the device to be connected to PC or other
device.
Charge the equipment
Phone
Connector
Charging USB
Connector
No. Item Description
Press Power key more than 3 seconds.
To turn α712 on
Press Power key for 2-3 seconds to power on.
Using provided charging adapter (5V/3A) is highly recom-
mended.
∙ α712 Device
∙ Power adapter
∙ USB cable
∙ Power cable
∙ Quick guide
∙ Docking Cradle (Optional)
∙ Flourish LAMA (Optional)
∙ Battery
2
USB/Bluetooth/WIFI connection mode indication
Disconnect/HID/Serial connection mode indication
This mode allows 1D/2D barcodes to be read in.
This mode allows you to read RFID tags.
Shows the time.
Shows the remaining amount of the battery.
Displays the device status light. When the barcode
scan is ready, B.ScanReady appears
When RFID scan is ready, R.Scan Ready is displayed.
When data is read, the tag value is displayed in the
center, and the number of read tags is displayed in
the lower left corner.
Connection
mode
Connection
status indication
Battery
state
Time
RFID Mode
Barcode Mode
1. Connection Mode
3. Barcode Mode
4. RFID Mode
2. Connection State Display
6. Battery
5. Time
7. State Display
Power Button
1. Getting Started
The α712 (RFID UHF Reader) is a high performance UHF reader
connecting to almost any mobile device. WIFI, Bluetooth, Serial or USB
connections can be chosen in order to link to PC, Android or iPhone
device.
Optional 2D barcode scanner engine from Zebra is available to capture
1D/2D barcode data and multitask on PC or mobile phone eciently.
Users are able to experience highest working performance with α712.
Instructions in this manual are based on default settings, and
may vary from your device, depending on the software
version on your device, and any changes to the device’s
Settings. All screen images in this manual are simulated.
Actual displays may vary, depending on the software version
of your device and any changes to the Settings.
This guide uses the following symbols to indicate hazards and
additional information.
1.1 About This Guide
Symbols
Symbol Name
Warning Implies information that could result in
serious injury to yourself or others.
Implies information that may result in minor
or serious product damage.
Implies information that can help you get more
important than surrounding text, such as
exceptions or additional information.
Caution
Note
Description
Your α712 packing box includes the following items
1.2 Packing Contents
1.4 Switching α712 on or o
To turn α712 o
It may turn o if pressing the key more than 5 seconds.
When charging through Docking Cradle (Option only )
α712 Charging : RED LED ON
α712 Charging completed : GREEN LED ON
Scans barcodes by emitting a red laser when you
press the related button.
α712 LED indicator indicates the charging status of the battery
inserted into the product.
Before removing the battery, turn o the power. Failure to do
so it may cause damage to the device.
Quick Guide
2
Phone
Power AdapterPower Cable
Battery
w
F
b/w
n/h
u/s
w
F
b/w
n/h
u/s
Scanner
w
F
b/w
n/h
u/s
The images may dier from your actual items. To purchase
additional accessories, contact your sales representative. You
can download latest version of Quick guide from www.apul-
setech.com
1.3 Installing and Replacing the Battery
α712 uses Lithium-ion rechargeable battery.
When charging only α712 body with DC Adapter
When charging α712 and Mobile phone at the same time with
DC Adapter ( USB option only )
1.5 Charging the Battery
To charge α712 uses USB cable or a docking cradle with the appropriate
power supply. You can also charge the battery by connecting it to
computer with USB cable.
Check the α712 is turned “ON”
If α712 turns o, Smart Phone cannot be charged.
1.6 Battery Charge Status
Battery LED Charging Indicator
2. α712 Overview
2.1 Top view
2.3 Display Screen Conguration
No. Item Description
2D Scanner
2.2 Bottom view
No. Item Description
1Port USB Client/ RS-232
Extension I/O
Allows the device to be connected to PC or other
device.
Charge the equipment
Phone
Connector
Charging USB
Connector
No. Item Description
Press Power key more than 3 seconds.
To turn α712 on
Press Power key for 2-3 seconds to power on.
Using provided charging adapter (5V/3A) is highly recom-
mended.
∙ α712 Device
∙ Power adapter
∙ USB cable
∙ Power cable
∙ Quick guide
∙ Docking Cradle (Optional)
∙ Flourish LAMA (Optional)
∙ Battery
2
USB/Bluetooth/WIFI connection mode indication
Disconnect/HID/Serial connection mode indication
This mode allows 1D/2D barcodes to be read in.
This mode allows you to read RFID tags.
Shows the time.
Shows the remaining amount of the battery.
Displays the device status light. When the barcode
scan is ready, B.ScanReady appears
When RFID scan is ready, R.Scan Ready is displayed.
When data is read, the tag value is displayed in the
center, and the number of read tags is displayed in
the lower left corner.
Connection
mode
Connection
status indication
Battery
state
Time
RFID Mode
Barcode Mode
1. Connection Mode
3. Barcode Mode
4. RFID Mode
2. Connection State Display
6. Battery
5. Time
7. State Display
Power Button
1. Getting Started
The α712 (RFID UHF Reader) is a high performance UHF reader
connecting to almost any mobile device. WIFI, Bluetooth, Serial or USB
connections can be chosen in order to link to PC, Android or iPhone
device.
Optional 2D barcode scanner engine from Zebra is available to capture
1D/2D barcode data and multitask on PC or mobile phone eciently.
Users are able to experience highest working performance with α712.
Instructions in this manual are based on default settings, and
may vary from your device, depending on the software
version on your device, and any changes to the device’s
Settings. All screen images in this manual are simulated.
Actual displays may vary, depending on the software version
of your device and any changes to the Settings.
This guide uses the following symbols to indicate hazards and
additional information.
1.1 About This Guide
Symbols
Symbol Name
Warning Implies information that could result in
serious injury to yourself or others.
Implies information that may result in minor
or serious product damage.
Implies information that can help you get more
important than surrounding text, such as
exceptions or additional information.
Caution
Note
Description
Your α712 packing box includes the following items
1.2 Packing Contents
1.4 Switching α712 on or o
To turn α712 o
It may turn o if pressing the key more than 5 seconds.
When charging through Docking Cradle (Option only )
α712 Charging : RED LED ON
α712 Charging completed : GREEN LED ON
w
F
b/w
n/h
u/s
It is recommended to use of the mobile device with Android
OS version 5.0 or later.
3.2 Bluetooth Connection
4. Information
3. Android Connections
If you have problem with α712, visit our web site to analyze the problem
or contact our partner in region or HQ.
Contact information is available at our website,
http://www.apulsetech.com
When requesting support, please have following information;
Before you use α712, please read this section of information
and keep your child aware of this information. For detailed
information, please refer to the safety guidelines.
・Do not use α712 during driving for safety.
・In medical sites, please follow the relevant regulations by turning o
your α712 when you are in medical sites.
・Please turn o your α712 or turn on planes mode when you are
boarding, to avoid wireless signals jamming aircraft control signal.
・Please turn o your α712 near the use of high precision electronic
equipment, otherwise it may lead to electronic equipment disability.
・Do not take apart your α712 or accessories without authorizing.
Only authorized institutions can repair this α712.
・Please keep α712 away from magnetic equipment. The radiation of
α712 will erase the information of the magnetic storage device.
・Please don’t use α712 under high temperature or in ammable areas
(example: gas station).
・Please keep your α712 and accessories away from children without
supervising.
・Serial number of the device ( On manufacturing label )
・Firmware version
4.1 Service information
Install the application on the PC and Mobile device to connect to α712
and refer to Android SDK User Guide.
α712 provides Demo Apps for function test and customer application
development.
Demo Apps may update or change without any notice.
For latest demo apps or support, please contact your regional partner or
visit our website.
Conrm that it is ready for Bluetooth connection by checking Bluetooth
LED light blinks on α712.
Enable Bluetooth function on the mobile device and pair it with α712.
When it paired, Bluetooth LED remains green.
Run “RFID/Barcode demo app” on your mobile device.
1. Run Demo app on the mobile device.
2. Select SPP mode from Bluetooth section.
3. Press SCAN button on the screen.
4. Select a searched device.
5. Control RFID or barcode scanner while BT in connected
For USB, WIFI connections, it is similar sequence . Connect α712 to a
device , run the demo application and select α712 device among the
list searched. Then scan barcodes or read RFID tags.
For more detialed setting information of demo application and others,
please refer to user guide and SDK user guide.
3.1 Demo Application
4.2 Safety information
・Please obey the relevant laws and regulations when you use your
α712, and respect others lawful rights and privacy.
・Please obey the relevant specication of this manual when you use
USB cable. Otherwise it may damage your α712 or personal computer.
・Modifying the device’s operating system or installing software from
unknown sources may cause device malfunction or data loss.
Improper or unauthorized use of the device voids your one-year
limited warranty.
Unless otherwise stated by Apulsetech in a sales agreement between Apulsetech and a
Partner, Hardware is warranted for a period of twelve (12) months, Battery and Accessory are
warranted for a period of six (6) months from date of shipment from Apulsetech.
Warranty Policy
Hardware cannot be warranted for cases below,
-Unathorized service partner or person repaired
-Damages by inappropriate opening, assembling, installation and part remove.
-Damages by customer abuse, negligence and misuse
-Damages by improper storage
-Damages by direct shock on LCD and touch pannel
-Damages by external shock on purpose
-Contaminated by water or other liquids including battery leakage
•When the prdouct is under warranty period,
There will be no charge to the customer for warranty repairs. Apulestech shall not be
responsible for any loss or damage of data, software programs or reinstallation of any
customer own program or data.
Customer is responsible for shipment to Apulsetech and assumes all costs and risks associated
with this transportation. Apulsetech shall be responsible for return shipment to customer,
unless Apulsetech determines that the hardware has no defect or is not under warranty.
•If the product is out of warranty,
Customer is responsible for both in/outbound shipment, also repairing charge including
material and service costs.
Hardware Warranty
Out of coverage
Apulsetech provides rmware, software including demoware which can be applicable to
customer software development. Firmware and Software are licensed“as is” with no warranty.
Customer shall download latest rmware or software, and get technical support from
http://www.apulsetech.com or contact our regional service partner.
Software / Firmware service
checks all hardware before shipment throughly, however in case it happens,
If the goods are found not operated or not properly working when it arrives, contact regional
sales manager rst to claim DOA.
DOA claim requires a submission thru on our website service & support page, you could enter
Parnter name, purchase order number and other information to processs the claim.
Or contact your regoinal sales manager to claim by email.
In general, submission of DOA claim must be within 2 weeks after shipment arrival.
For DOA claim, replacement or credit will be provided to customer AFTER receiving the faulty
goods from customer and Apulsetech completes the diagnostic process.
DOA (Dead on arrival) replacement
For warranty or Non-warranty repair, customer must apply RMA request form.
Prior to returning your defective product for repairs, an authorized RMA number must be
retained. To obtain an authorized RMA number you must ll out the RMA request form, which
can be submitted from Apulsetech website or requested via email at service@apulsetech.com
directly.
Once this form is submitted, customer will receive a response within 24 hours with either: (1)
an RMA number; or (2) a request to provide additional details and information regarding the
defective product.
RMA (Return Material Authorization)
Address : A-1403, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of
Korea Zip 14322
Tel. +82-70-4222-5684
Email : sales@apulsetech.com
Website : www.apulsetech.com
Contact Info
Battery Indicator Indicates the battery condition of the product.
LED lights up when in WIFI, BT mode.
LED lights up when in USB, SERIAL mode.
LED lights up when in NORMAL, HID mode.
Smartphone cradle adsorption pad.
Read and write data on RFID tags.
Connect with smartphones and tablets.
Shows the status of the product, such as connection
mode and battery.
B / W
Power
Button
α712 can be turned on and o.
Mode
Button
Select communication mode
(USB, BLUETOOTH, WIFI, SERIAL, etc.)
U / S
N / H
This button selects RFID Single Reading
Mode or Multi Reading Mode.
Button to attempt to connect α712 to a WIFI AP
Increase the volume or RFID power level.
The volume is set by default.
Lower the volume or RFID power level.
The volume is set by default.
FNC
WPS
UP
DOWN
Flourish LAMA
RFID Antenna
USB Cable
DISPLAY
>
>
w
F
b/w
n/h
u/s
2.4 Front view 2.5 Back view 2.6 Button
No. Item Description
No. Item Description
No. Item Description
w
F
b/w
n/h
u/s
It is recommended to use of the mobile device with Android
OS version 5.0 or later.
3.2 Bluetooth Connection
4. Information
3. Android Connections
If you have problem with α712, visit our web site to analyze the problem
or contact our partner in region or HQ.
Contact information is available at our website,
http://www.apulsetech.com
When requesting support, please have following information;
Before you use α712, please read this section of information
and keep your child aware of this information. For detailed
information, please refer to the safety guidelines.
・Do not use α712 during driving for safety.
・In medical sites, please follow the relevant regulations by turning o
your α712 when you are in medical sites.
・Please turn o your α712 or turn on planes mode when you are
boarding, to avoid wireless signals jamming aircraft control signal.
・Please turn o your α712 near the use of high precision electronic
equipment, otherwise it may lead to electronic equipment disability.
・Do not take apart your α712 or accessories without authorizing.
Only authorized institutions can repair this α712.
・Please keep α712 away from magnetic equipment. The radiation of
α712 will erase the information of the magnetic storage device.
・Please don’t use α712 under high temperature or in ammable areas
(example: gas station).
・Please keep your α712 and accessories away from children without
supervising.
・Serial number of the device ( On manufacturing label )
・Firmware version
4.1 Service information
Install the application on the PC and Mobile device to connect to α712
and refer to Android SDK User Guide.
α712 provides Demo Apps for function test and customer application
development.
Demo Apps may update or change without any notice.
For latest demo apps or support, please contact your regional partner or
visit our website.
Conrm that it is ready for Bluetooth connection by checking Bluetooth
LED light blinks on α712.
Enable Bluetooth function on the mobile device and pair it with α712.
When it paired, Bluetooth LED remains green.
Run “RFID/Barcode demo app” on your mobile device.
1. Run Demo app on the mobile device.
2. Select SPP mode from Bluetooth section.
3. Press SCAN button on the screen.
4. Select a searched device.
5. Control RFID or barcode scanner while BT in connected
For USB, WIFI connections, it is similar sequence . Connect α712 to a
device , run the demo application and select α712 device among the
list searched. Then scan barcodes or read RFID tags.
For more detialed setting information of demo application and others,
please refer to user guide and SDK user guide.
3.1 Demo Application
4.2 Safety information
・Please obey the relevant laws and regulations when you use your
α712, and respect others lawful rights and privacy.
・Please obey the relevant specication of this manual when you use
USB cable. Otherwise it may damage your α712 or personal computer.
・Modifying the device’s operating system or installing software from
unknown sources may cause device malfunction or data loss.
Improper or unauthorized use of the device voids your one-year
limited warranty.
Unless otherwise stated by Apulsetech in a sales agreement between Apulsetech and a
Partner, Hardware is warranted for a period of twelve (12) months, Battery and Accessory are
warranted for a period of six (6) months from date of shipment from Apulsetech.
Warranty Policy
Hardware cannot be warranted for cases below,
-Unathorized service partner or person repaired
-Damages by inappropriate opening, assembling, installation and part remove.
-Damages by customer abuse, negligence and misuse
-Damages by improper storage
-Damages by direct shock on LCD and touch pannel
-Damages by external shock on purpose
-Contaminated by water or other liquids including battery leakage
•When the prdouct is under warranty period,
There will be no charge to the customer for warranty repairs. Apulestech shall not be
responsible for any loss or damage of data, software programs or reinstallation of any
customer own program or data.
Customer is responsible for shipment to Apulsetech and assumes all costs and risks associated
with this transportation. Apulsetech shall be responsible for return shipment to customer,
unless Apulsetech determines that the hardware has no defect or is not under warranty.
•If the product is out of warranty,
Customer is responsible for both in/outbound shipment, also repairing charge including
material and service costs.
Hardware Warranty
Out of coverage
Apulsetech provides rmware, software including demoware which can be applicable to
customer software development. Firmware and Software are licensed“as is” with no warranty.
Customer shall download latest rmware or software, and get technical support from
http://www.apulsetech.com or contact our regional service partner.
Software / Firmware service
checks all hardware before shipment throughly, however in case it happens,
If the goods are found not operated or not properly working when it arrives, contact regional
sales manager rst to claim DOA.
DOA claim requires a submission thru on our website service & support page, you could enter
Parnter name, purchase order number and other information to processs the claim.
Or contact your regoinal sales manager to claim by email.
In general, submission of DOA claim must be within 2 weeks after shipment arrival.
For DOA claim, replacement or credit will be provided to customer AFTER receiving the faulty
goods from customer and Apulsetech completes the diagnostic process.
DOA (Dead on arrival) replacement
For warranty or Non-warranty repair, customer must apply RMA request form.
Prior to returning your defective product for repairs, an authorized RMA number must be
retained. To obtain an authorized RMA number you must ll out the RMA request form, which
can be submitted from Apulsetech website or requested via email at service@apulsetech.com
directly.
Once this form is submitted, customer will receive a response within 24 hours with either: (1)
an RMA number; or (2) a request to provide additional details and information regarding the
defective product.
RMA (Return Material Authorization)
Address : A-1403, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of
Korea Zip 14322
Tel. +82-70-4222-5684
Email : sales@apulsetech.com
Website : www.apulsetech.com
Contact Info
Battery Indicator Indicates the battery condition of the product.
LED lights up when in WIFI, BT mode.
LED lights up when in USB, SERIAL mode.
LED lights up when in NORMAL, HID mode.
Smartphone cradle adsorption pad.
Read and write data on RFID tags.
Connect with smartphones and tablets.
Shows the status of the product, such as connection
mode and battery.
B / W
Power
Button
α712 can be turned on and o.
Mode
Button
Select communication mode
(USB, BLUETOOTH, WIFI, SERIAL, etc.)
U / S
N / H
This button selects RFID Single Reading
Mode or Multi Reading Mode.
Button to attempt to connect α712 to a WIFI AP
Increase the volume or RFID power level.
The volume is set by default.
Lower the volume or RFID power level.
The volume is set by default.
FNC
WPS
UP
DOWN
Flourish LAMA
RFID Antenna
USB Cable
DISPLAY
>
>
w
F
b/w
n/h
u/s
2.4 Front view 2.5 Back view 2.6 Button
No. Item Description
No. Item Description
No. Item Description
w
F
b/w
n/h
u/s
It is recommended to use of the mobile device with Android
OS version 5.0 or later.
3.2 Bluetooth Connection
4. Information
3. Android Connections
If you have problem with α712, visit our web site to analyze the problem
or contact our partner in region or HQ.
Contact information is available at our website,
http://www.apulsetech.com
When requesting support, please have following information;
Before you use α712, please read this section of information
and keep your child aware of this information. For detailed
information, please refer to the safety guidelines.
・Do not use α712 during driving for safety.
・In medical sites, please follow the relevant regulations by turning o
your α712 when you are in medical sites.
・Please turn o your α712 or turn on planes mode when you are
boarding, to avoid wireless signals jamming aircraft control signal.
・Please turn o your α712 near the use of high precision electronic
equipment, otherwise it may lead to electronic equipment disability.
・Do not take apart your α712 or accessories without authorizing.
Only authorized institutions can repair this α712.
・Please keep α712 away from magnetic equipment. The radiation of
α712 will erase the information of the magnetic storage device.
・Please don’t use α712 under high temperature or in ammable areas
(example: gas station).
・Please keep your α712 and accessories away from children without
supervising.
・Serial number of the device ( On manufacturing label )
・Firmware version
4.1 Service information
Install the application on the PC and Mobile device to connect to α712
and refer to Android SDK User Guide.
α712 provides Demo Apps for function test and customer application
development.
Demo Apps may update or change without any notice.
For latest demo apps or support, please contact your regional partner or
visit our website.
Conrm that it is ready for Bluetooth connection by checking Bluetooth
LED light blinks on α712.
Enable Bluetooth function on the mobile device and pair it with α712.
When it paired, Bluetooth LED remains green.
Run “RFID/Barcode demo app” on your mobile device.
1. Run Demo app on the mobile device.
2. Select SPP mode from Bluetooth section.
3. Press SCAN button on the screen.
4. Select a searched device.
5. Control RFID or barcode scanner while BT in connected
For USB, WIFI connections, it is similar sequence . Connect α712 to a
device , run the demo application and select α712 device among the
list searched. Then scan barcodes or read RFID tags.
For more detialed setting information of demo application and others,
please refer to user guide and SDK user guide.
3.1 Demo Application
4.2 Safety information
・Please obey the relevant laws and regulations when you use your
α712, and respect others lawful rights and privacy.
・Please obey the relevant specication of this manual when you use
USB cable. Otherwise it may damage your α712 or personal computer.
・Modifying the device’s operating system or installing software from
unknown sources may cause device malfunction or data loss.
Improper or unauthorized use of the device voids your one-year
limited warranty.
Unless otherwise stated by Apulsetech in a sales agreement between Apulsetech and a
Partner, Hardware is warranted for a period of twelve (12) months, Battery and Accessory are
warranted for a period of six (6) months from date of shipment from Apulsetech.
Warranty Policy
Hardware cannot be warranted for cases below,
-Unathorized service partner or person repaired
-Damages by inappropriate opening, assembling, installation and part remove.
-Damages by customer abuse, negligence and misuse
-Damages by improper storage
-Damages by direct shock on LCD and touch pannel
-Damages by external shock on purpose
-Contaminated by water or other liquids including battery leakage
•When the prdouct is under warranty period,
There will be no charge to the customer for warranty repairs. Apulestech shall not be
responsible for any loss or damage of data, software programs or reinstallation of any
customer own program or data.
Customer is responsible for shipment to Apulsetech and assumes all costs and risks associated
with this transportation. Apulsetech shall be responsible for return shipment to customer,
unless Apulsetech determines that the hardware has no defect or is not under warranty.
•If the product is out of warranty,
Customer is responsible for both in/outbound shipment, also repairing charge including
material and service costs.
Hardware Warranty
Out of coverage
Apulsetech provides rmware, software including demoware which can be applicable to
customer software development. Firmware and Software are licensed“as is” with no warranty.
Customer shall download latest rmware or software, and get technical support from
http://www.apulsetech.com or contact our regional service partner.
Software / Firmware service
checks all hardware before shipment throughly, however in case it happens,
If the goods are found not operated or not properly working when it arrives, contact regional
sales manager rst to claim DOA.
DOA claim requires a submission thru on our website service & support page, you could enter
Parnter name, purchase order number and other information to processs the claim.
Or contact your regoinal sales manager to claim by email.
In general, submission of DOA claim must be within 2 weeks after shipment arrival.
For DOA claim, replacement or credit will be provided to customer AFTER receiving the faulty
goods from customer and Apulsetech completes the diagnostic process.
DOA (Dead on arrival) replacement
For warranty or Non-warranty repair, customer must apply RMA request form.
Prior to returning your defective product for repairs, an authorized RMA number must be
retained. To obtain an authorized RMA number you must ll out the RMA request form, which
can be submitted from Apulsetech website or requested via email at service@apulsetech.com
directly.
Once this form is submitted, customer will receive a response within 24 hours with either: (1)
an RMA number; or (2) a request to provide additional details and information regarding the
defective product.
RMA (Return Material Authorization)
Address : A-1403, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of
Korea Zip 14322
Tel. +82-70-4222-5684
Website : www.apulsetech.com
Contact Info
Battery Indicator Indicates the battery condition of the product.
LED lights up when in WIFI, BT mode.
LED lights up when in USB, SERIAL mode.
LED lights up when in NORMAL, HID mode.
Smartphone cradle adsorption pad.
Read and write data on RFID tags.
Connect with smartphones and tablets.
Shows the status of the product, such as connection
mode and battery.
B / W
Power
Button
α712 can be turned on and o.
Mode
Button
Select communication mode
(USB, BLUETOOTH, WIFI, SERIAL, etc.)
U / S
N / H
This button selects RFID Single Reading
Mode or Multi Reading Mode.
Button to attempt to connect α712 to a WIFI AP
Increase the volume or RFID power level.
The volume is set by default.
Lower the volume or RFID power level.
The volume is set by default.
FNC
WPS
UP
DOWN
Flourish LAMA
RFID Antenna
USB Cable
DISPLAY
>
>
w
F
b/w
n/h
u/s
2.4 Front view 2.5 Back view 2.6 Button
No. Item Description
No. Item Description
No. Item Description
w
F
b/w
n/h
u/s
It is recommended to use of the mobile device with Android
OS version 5.0 or later.
3.2 Bluetooth Connection
4. Information
3. Android Connections
If you have problem with α712, visit our web site to analyze the problem
or contact our partner in region or HQ.
Contact information is available at our website,
http://www.apulsetech.com
When requesting support, please have following information;
Before you use α712, please read this section of information
and keep your child aware of this information. For detailed
information, please refer to the safety guidelines.
・Do not use α712 during driving for safety.
・In medical sites, please follow the relevant regulations by turning o
your α712 when you are in medical sites.
・Please turn o your α712 or turn on planes mode when you are
boarding, to avoid wireless signals jamming aircraft control signal.
・Please turn o your α712 near the use of high precision electronic
equipment, otherwise it may lead to electronic equipment disability.
・Do not take apart your α712 or accessories without authorizing.
Only authorized institutions can repair this α712.
・Please keep α712 away from magnetic equipment. The radiation of
α712 will erase the information of the magnetic storage device.
・Please don’t use α712 under high temperature or in ammable areas
(example: gas station).
・Please keep your α712 and accessories away from children without
supervising.
・Serial number of the device ( On manufacturing label )
・Firmware version
4.1 Service information
Install the application on the PC and Mobile device to connect to α712
and refer to Android SDK User Guide.
α712 provides Demo Apps for function test and customer application
development.
Demo Apps may update or change without any notice.
For latest demo apps or support, please contact your regional partner or
visit our website.
Conrm that it is ready for Bluetooth connection by checking Bluetooth
LED light blinks on α712.
Enable Bluetooth function on the mobile device and pair it with α712.
When it paired, Bluetooth LED remains green.
Run “RFID/Barcode demo app” on your mobile device.
1. Run Demo app on the mobile device.
2. Select SPP mode from Bluetooth section.
3. Press SCAN button on the screen.
4. Select a searched device.
5. Control RFID or barcode scanner while BT in connected
For USB, WIFI connections, it is similar sequence . Connect α712 to a
device , run the demo application and select α712 device among the
list searched. Then scan barcodes or read RFID tags.
For more detialed setting information of demo application and others,
please refer to user guide and SDK user guide.
3.1 Demo Application
4.2 Safety information
・Please obey the relevant laws and regulations when you use your
α712, and respect others lawful rights and privacy.
・Please obey the relevant specication of this manual when you use
USB cable. Otherwise it may damage your α712 or personal computer.
・Modifying the device’s operating system or installing software from
unknown sources may cause device malfunction or data loss.
Improper or unauthorized use of the device voids your one-year
limited warranty.
Unless otherwise stated by Apulsetech in a sales agreement between Apulsetech and a
Partner, Hardware is warranted for a period of twelve (12) months, Battery and Accessory are
warranted for a period of six (6) months from date of shipment from Apulsetech.
Warranty Policy
Hardware cannot be warranted for cases below,
-Unathorized service partner or person repaired
-Damages by inappropriate opening, assembling, installation and part remove.
-Damages by customer abuse, negligence and misuse
-Damages by improper storage
-Damages by direct shock on LCD and touch pannel
-Damages by external shock on purpose
-Contaminated by water or other liquids including battery leakage
•When the prdouct is under warranty period,
There will be no charge to the customer for warranty repairs. Apulestech shall not be
responsible for any loss or damage of data, software programs or reinstallation of any
customer own program or data.
Customer is responsible for shipment to Apulsetech and assumes all costs and risks associated
with this transportation. Apulsetech shall be responsible for return shipment to customer,
unless Apulsetech determines that the hardware has no defect or is not under warranty.
•If the product is out of warranty,
Customer is responsible for both in/outbound shipment, also repairing charge including
material and service costs.
Hardware Warranty
Out of coverage
Apulsetech provides rmware, software including demoware which can be applicable to
customer software development. Firmware and Software are licensed“as is” with no warranty.
Customer shall download latest rmware or software, and get technical support from
http://www.apulsetech.com or contact our regional service partner.
Software / Firmware service
checks all hardware before shipment throughly, however in case it happens,
If the goods are found not operated or not properly working when it arrives, contact regional
sales manager rst to claim DOA.
DOA claim requires a submission thru on our website service & support page, you could enter
Parnter name, purchase order number and other information to processs the claim.
Or contact your regoinal sales manager to claim by email.
In general, submission of DOA claim must be within 2 weeks after shipment arrival.
For DOA claim, replacement or credit will be provided to customer AFTER receiving the faulty
goods from customer and Apulsetech completes the diagnostic process.
DOA (Dead on arrival) replacement
For warranty or Non-warranty repair, customer must apply RMA request form.
Prior to returning your defective product for repairs, an authorized RMA number must be
retained. To obtain an authorized RMA number you must ll out the RMA request form, which
directly.
Once this form is submitted, customer will receive a response within 24 hours with either: (1)
an RMA number; or (2) a request to provide additional details and information regarding the
defective product.
RMA (Return Material Authorization)
Address : A-1403, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of
Korea Zip 14322
Tel. +82-70-4222-5684
Website : www.apulsetech.com
Contact Info
Battery Indicator Indicates the battery condition of the product.
LED lights up when in WIFI, BT mode.
LED lights up when in USB, SERIAL mode.
LED lights up when in NORMAL, HID mode.
Smartphone cradle adsorption pad.
Read and write data on RFID tags.
Connect with smartphones and tablets.
Shows the status of the product, such as connection
mode and battery.
B / W
Power
Button
α712 can be turned on and o.
Mode
Button
Select communication mode
(USB, BLUETOOTH, WIFI, SERIAL, etc.)
U / S
N / H
This button selects RFID Single Reading
Mode or Multi Reading Mode.
Button to attempt to connect α712 to a WIFI AP
Increase the volume or RFID power level.
The volume is set by default.
Lower the volume or RFID power level.
The volume is set by default.
FNC
WPS
UP
DOWN
Flourish LAMA
RFID Antenna
USB Cable
DISPLAY
>
>
w
F
b/w
n/h
u/s
2.4 Front view 2.5 Back view 2.6 Button
No. Item Description
No. Item Description
No. Item Description
w
F
b/w
n/h
u/s
It is recommended to use of the mobile device with Android
OS version 5.0 or later.
3.2 Bluetooth Connection
4. Information
3. Android Connections
If you have problem with α712, visit our web site to analyze the problem
or contact our partner in region or HQ.
Contact information is available at our website,
http://www.apulsetech.com
When requesting support, please have following information;
Before you use α712, please read this section of information
and keep your child aware of this information. For detailed
information, please refer to the safety guidelines.
・Do not use α712 during driving for safety.
・In medical sites, please follow the relevant regulations by turning o
your α712 when you are in medical sites.
・Please turn o your α712 or turn on planes mode when you are
boarding, to avoid wireless signals jamming aircraft control signal.
・Please turn o your α712 near the use of high precision electronic
equipment, otherwise it may lead to electronic equipment disability.
・Do not take apart your α712 or accessories without authorizing.
Only authorized institutions can repair this α712.
・Please keep α712 away from magnetic equipment. The radiation of
α712 will erase the information of the magnetic storage device.
・Please don’t use α712 under high temperature or in ammable areas
(example: gas station).
・Please keep your α712 and accessories away from children without
supervising.
・Serial number of the device ( On manufacturing label )
・Firmware version
4.1 Service information
Install the application on the PC and Mobile device to connect to α712
and refer to Android SDK User Guide.
α712 provides Demo Apps for function test and customer application
development.
Demo Apps may update or change without any notice.
For latest demo apps or support, please contact your regional partner or
visit our website.
Conrm that it is ready for Bluetooth connection by checking Bluetooth
LED light blinks on α712.
Enable Bluetooth function on the mobile device and pair it with α712.
When it paired, Bluetooth LED remains green.
Run “RFID/Barcode demo app” on your mobile device.
1. Run Demo app on the mobile device.
2. Select SPP mode from Bluetooth section.
3. Press SCAN button on the screen.
4. Select a searched device.
5. Control RFID or barcode scanner while BT in connected
For USB, WIFI connections, it is similar sequence . Connect α712 to a
device , run the demo application and select α712 device among the
list searched. Then scan barcodes or read RFID tags.
For more detialed setting information of demo application and others,
please refer to user guide and SDK user guide.
3.1 Demo Application
4.2 Safety information
・Please obey the relevant laws and regulations when you use your
α712, and respect others lawful rights and privacy.
・Please obey the relevant specication of this manual when you use
USB cable. Otherwise it may damage your α712 or personal computer.
・Modifying the device’s operating system or installing software from
unknown sources may cause device malfunction or data loss.
Improper or unauthorized use of the device voids your one-year
limited warranty.
Unless otherwise stated by Apulsetech in a sales agreement between Apulsetech and a
Partner, Hardware is warranted for a period of twelve (12) months, Battery and Accessory are
warranted for a period of six (6) months from date of shipment from Apulsetech.
Warranty Policy
Hardware cannot be warranted for cases below,
-Unathorized service partner or person repaired
-Damages by inappropriate opening, assembling, installation and part remove.
-Damages by customer abuse, negligence and misuse
-Damages by improper storage
-Damages by direct shock on LCD and touch pannel
-Damages by external shock on purpose
-Contaminated by water or other liquids including battery leakage
•When the prdouct is under warranty period,
There will be no charge to the customer for warranty repairs. Apulestech shall not be
responsible for any loss or damage of data, software programs or reinstallation of any
customer own program or data.
Customer is responsible for shipment to Apulsetech and assumes all costs and risks associated
with this transportation. Apulsetech shall be responsible for return shipment to customer,
unless Apulsetech determines that the hardware has no defect or is not under warranty.
•If the product is out of warranty,
Customer is responsible for both in/outbound shipment, also repairing charge including
material and service costs.
Hardware Warranty
Out of coverage
Apulsetech provides rmware, software including demoware which can be applicable to
customer software development. Firmware and Software are licensed“as is” with no warranty.
Customer shall download latest rmware or software, and get technical support from
http://www.apulsetech.com or contact our regional service partner.
Software / Firmware service
checks all hardware before shipment throughly, however in case it happens,
If the goods are found not operated or not properly working when it arrives, contact regional
sales manager rst to claim DOA.
DOA claim requires a submission thru on our website service & support page, you could enter
Parnter name, purchase order number and other information to processs the claim.
Or contact your regoinal sales manager to claim by email.
In general, submission of DOA claim must be within 2 weeks after shipment arrival.
For DOA claim, replacement or credit will be provided to customer AFTER receiving the faulty
goods from customer and Apulsetech completes the diagnostic process.
DOA (Dead on arrival) replacement
For warranty or Non-warranty repair, customer must apply RMA request form.
Prior to returning your defective product for repairs, an authorized RMA number must be
retained. To obtain an authorized RMA number you must ll out the RMA request form, which
can be submitted from Apulsetech website or requested via email at service@apulsetech.com
directly.
Once this form is submitted, customer will receive a response within 24 hours with either: (1)
an RMA number; or (2) a request to provide additional details and information regarding the
defective product.
RMA (Return Material Authorization)
Address : A-1403, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of
Korea Zip 14322
Tel. +82-70-4222-5684
Email : sales@apulsetech.com
Website : www.apulsetech.com
Contact Info
Battery Indicator Indicates the battery condition of the product.
LED lights up when in WIFI, BT mode.
LED lights up when in USB, SERIAL mode.
LED lights up when in NORMAL, HID mode.
Smartphone cradle adsorption pad.
Read and write data on RFID tags.
Connect with smartphones and tablets.
Shows the status of the product, such as connection
mode and battery.
B / W
Power
Button
α712 can be turned on and o.
Mode
Button
Select communication mode
(USB, BLUETOOTH, WIFI, SERIAL, etc.)
U / S
N / H
This button selects RFID Single Reading
Mode or Multi Reading Mode.
Button to attempt to connect α712 to a WIFI AP
Increase the volume or RFID power level.
The volume is set by default.
Lower the volume or RFID power level.
The volume is set by default.
FNC
WPS
UP
DOWN
Flourish LAMA
RFID Antenna
USB Cable
DISPLAY
>
>
w
F
b/w
n/h
u/s
2.4 Front view 2.5 Back view 2.6 Button
No. Item Description
No. Item Description
No. Item Description
w
F
b/w
n/h
u/s
It is recommended to use of the mobile device with Android
OS version 5.0 or later.
3.2 Bluetooth Connection
4. Information
3. Android Connections
If you have problem with α712, visit our web site to analyze the problem
or contact our partner in region or HQ.
Contact information is available at our website,
http://www.apulsetech.com
When requesting support, please have following information;
Before you use α712, please read this section of information
and keep your child aware of this information. For detailed
information, please refer to the safety guidelines.
・Do not use α712 during driving for safety.
・In medical sites, please follow the relevant regulations by turning o
your α712 when you are in medical sites.
・Please turn o your α712 or turn on planes mode when you are
boarding, to avoid wireless signals jamming aircraft control signal.
・Please turn o your α712 near the use of high precision electronic
equipment, otherwise it may lead to electronic equipment disability.
・Do not take apart your α712 or accessories without authorizing.
Only authorized institutions can repair this α712.
・Please keep α712 away from magnetic equipment. The radiation of
α712 will erase the information of the magnetic storage device.
・Please don’t use α712 under high temperature or in ammable areas
(example: gas station).
・Please keep your α712 and accessories away from children without
supervising.
・Serial number of the device ( On manufacturing label )
・Firmware version
4.1 Service information
Install the application on the PC and Mobile device to connect to α712
and refer to Android SDK User Guide.
α712 provides Demo Apps for function test and customer application
development.
Demo Apps may update or change without any notice.
For latest demo apps or support, please contact your regional partner or
visit our website.
Conrm that it is ready for Bluetooth connection by checking Bluetooth
LED light blinks on α712.
Enable Bluetooth function on the mobile device and pair it with α712.
When it paired, Bluetooth LED remains green.
Run “RFID/Barcode demo app” on your mobile device.
1. Run Demo app on the mobile device.
2. Select SPP mode from Bluetooth section.
3. Press SCAN button on the screen.
4. Select a searched device.
5. Control RFID or barcode scanner while BT in connected
For USB, WIFI connections, it is similar sequence . Connect α712 to a
device , run the demo application and select α712 device among the
list searched. Then scan barcodes or read RFID tags.
For more detialed setting information of demo application and others,
please refer to user guide and SDK user guide.
3.1 Demo Application
4.2 Safety information
・Please obey the relevant laws and regulations when you use your
α712, and respect others lawful rights and privacy.
・Please obey the relevant specication of this manual when you use
USB cable. Otherwise it may damage your α712 or personal computer.
・Modifying the device’s operating system or installing software from
unknown sources may cause device malfunction or data loss.
Improper or unauthorized use of the device voids your one-year
limited warranty.
Unless otherwise stated by Apulsetech in a sales agreement between Apulsetech and a
Partner, Hardware is warranted for a period of twelve (12) months, Battery and Accessory are
warranted for a period of six (6) months from date of shipment from Apulsetech.
Warranty Policy
Hardware cannot be warranted for cases below,
-Unathorized service partner or person repaired
-Damages by inappropriate opening, assembling, installation and part remove.
-Damages by customer abuse, negligence and misuse
-Damages by improper storage
-Damages by direct shock on LCD and touch pannel
-Damages by external shock on purpose
-Contaminated by water or other liquids including battery leakage
•When the prdouct is under warranty period,
There will be no charge to the customer for warranty repairs. Apulestech shall not be
responsible for any loss or damage of data, software programs or reinstallation of any
customer own program or data.
Customer is responsible for shipment to Apulsetech and assumes all costs and risks associated
with this transportation. Apulsetech shall be responsible for return shipment to customer,
unless Apulsetech determines that the hardware has no defect or is not under warranty.
•If the product is out of warranty,
Customer is responsible for both in/outbound shipment, also repairing charge including
material and service costs.
Hardware Warranty
Out of coverage
Apulsetech provides rmware, software including demoware which can be applicable to
customer software development. Firmware and Software are licensed“as is” with no warranty.
Customer shall download latest rmware or software, and get technical support from
http://www.apulsetech.com or contact our regional service partner.
Software / Firmware service
checks all hardware before shipment throughly, however in case it happens,
If the goods are found not operated or not properly working when it arrives, contact regional
sales manager rst to claim DOA.
DOA claim requires a submission thru on our website service & support page, you could enter
Parnter name, purchase order number and other information to processs the claim.
Or contact your regoinal sales manager to claim by email.
In general, submission of DOA claim must be within 2 weeks after shipment arrival.
For DOA claim, replacement or credit will be provided to customer AFTER receiving the faulty
goods from customer and Apulsetech completes the diagnostic process.
DOA (Dead on arrival) replacement
For warranty or Non-warranty repair, customer must apply RMA request form.
Prior to returning your defective product for repairs, an authorized RMA number must be
retained. To obtain an authorized RMA number you must ll out the RMA request form, which
can be submitted from Apulsetech website or requested via email at service@apulsetech.com
directly.
Once this form is submitted, customer will receive a response within 24 hours with either: (1)
an RMA number; or (2) a request to provide additional details and information regarding the
defective product.
RMA (Return Material Authorization)
Address : A-1403, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of
Korea Zip 14322
Tel. +82-70-4222-5684
Email : sales@apulsetech.com
Website : www.apulsetech.com
Contact Info
Battery Indicator Indicates the battery condition of the product.
LED lights up when in WIFI, BT mode.
LED lights up when in USB, SERIAL mode.
LED lights up when in NORMAL, HID mode.
Smartphone cradle adsorption pad.
Read and write data on RFID tags.
Connect with smartphones and tablets.
Shows the status of the product, such as connection
mode and battery.
B / W
Power
Button
α712 can be turned on and o.
Mode
Button
Select communication mode
(USB, BLUETOOTH, WIFI, SERIAL, etc.)
U / S
N / H
This button selects RFID Single Reading
Mode or Multi Reading Mode.
Button to attempt to connect α712 to a WIFI AP
Increase the volume or RFID power level.
The volume is set by default.
Lower the volume or RFID power level.
The volume is set by default.
FNC
WPS
UP
DOWN
Flourish LAMA
RFID Antenna
USB Cable
DISPLAY
>
>
w
F
b/w
n/h
u/s
2.4 Front view 2.5 Back view 2.6 Button
No. Item Description
No. Item Description
No. Item Description
w
F
b/w
n/h
u/s
It is recommended to use of the mobile device with Android
OS version 5.0 or later.
3.2 Bluetooth Connection
4. Information
3. Android Connections
If you have problem with α712, visit our web site to analyze the problem
or contact our partner in region or HQ.
Contact information is available at our website,
http://www.apulsetech.com
When requesting support, please have following information;
Before you use α712, please read this section of information
and keep your child aware of this information. For detailed
information, please refer to the safety guidelines.
・Do not use α712 during driving for safety.
・In medical sites, please follow the relevant regulations by turning o
your α712 when you are in medical sites.
・Please turn o your α712 or turn on planes mode when you are
boarding, to avoid wireless signals jamming aircraft control signal.
・Please turn o your α712 near the use of high precision electronic
equipment, otherwise it may lead to electronic equipment disability.
・Do not take apart your α712 or accessories without authorizing.
Only authorized institutions can repair this α712.
・Please keep α712 away from magnetic equipment. The radiation of
α712 will erase the information of the magnetic storage device.
・Please don’t use α712 under high temperature or in ammable areas
(example: gas station).
・Please keep your α712 and accessories away from children without
supervising.
・Serial number of the device ( On manufacturing label )
・Firmware version
4.1 Service information
Install the application on the PC and Mobile device to connect to α712
and refer to Android SDK User Guide.
α712 provides Demo Apps for function test and customer application
development.
Demo Apps may update or change without any notice.
For latest demo apps or support, please contact your regional partner or
visit our website.
Conrm that it is ready for Bluetooth connection by checking Bluetooth
LED light blinks on α712.
Enable Bluetooth function on the mobile device and pair it with α712.
When it paired, Bluetooth LED remains green.
Run “RFID/Barcode demo app” on your mobile device.
1. Run Demo app on the mobile device.
2. Select SPP mode from Bluetooth section.
3. Press SCAN button on the screen.
4. Select a searched device.
5. Control RFID or barcode scanner while BT in connected
For USB, WIFI connections, it is similar sequence . Connect α712 to a
device , run the demo application and select α712 device among the
list searched. Then scan barcodes or read RFID tags.
For more detialed setting information of demo application and others,
please refer to user guide and SDK user guide.
3.1 Demo Application
4.2 Safety information
・Please obey the relevant laws and regulations when you use your
α712, and respect others lawful rights and privacy.
・Please obey the relevant specication of this manual when you use
USB cable. Otherwise it may damage your α712 or personal computer.
・Modifying the device’s operating system or installing software from
unknown sources may cause device malfunction or data loss.
Improper or unauthorized use of the device voids your one-year
limited warranty.
Unless otherwise stated by Apulsetech in a sales agreement between Apulsetech and a
Partner, Hardware is warranted for a period of twelve (12) months, Battery and Accessory are
warranted for a period of six (6) months from date of shipment from Apulsetech.
Warranty Policy
Hardware cannot be warranted for cases below,
-Unathorized service partner or person repaired
-Damages by inappropriate opening, assembling, installation and part remove.
-Damages by customer abuse, negligence and misuse
-Damages by improper storage
-Damages by direct shock on LCD and touch pannel
-Damages by external shock on purpose
-Contaminated by water or other liquids including battery leakage
•When the prdouct is under warranty period,
There will be no charge to the customer for warranty repairs. Apulestech shall not be
responsible for any loss or damage of data, software programs or reinstallation of any
customer own program or data.
Customer is responsible for shipment to Apulsetech and assumes all costs and risks associated
with this transportation. Apulsetech shall be responsible for return shipment to customer,
unless Apulsetech determines that the hardware has no defect or is not under warranty.
•If the product is out of warranty,
Customer is responsible for both in/outbound shipment, also repairing charge including
material and service costs.
Hardware Warranty
Out of coverage
Apulsetech provides rmware, software including demoware which can be applicable to
customer software development. Firmware and Software are licensed“as is” with no warranty.
Customer shall download latest rmware or software, and get technical support from
http://www.apulsetech.com or contact our regional service partner.
Software / Firmware service
checks all hardware before shipment throughly, however in case it happens,
If the goods are found not operated or not properly working when it arrives, contact regional
sales manager rst to claim DOA.
DOA claim requires a submission thru on our website service & support page, you could enter
Parnter name, purchase order number and other information to processs the claim.
Or contact your regoinal sales manager to claim by email.
In general, submission of DOA claim must be within 2 weeks after shipment arrival.
For DOA claim, replacement or credit will be provided to customer AFTER receiving the faulty
goods from customer and Apulsetech completes the diagnostic process.
DOA (Dead on arrival) replacement
For warranty or Non-warranty repair, customer must apply RMA request form.
Prior to returning your defective product for repairs, an authorized RMA number must be
retained. To obtain an authorized RMA number you must ll out the RMA request form, which
can be submitted from Apulsetech website or requested via email at service@apulsetech.com
directly.
Once this form is submitted, customer will receive a response within 24 hours with either: (1)
an RMA number; or (2) a request to provide additional details and information regarding the
defective product.
RMA (Return Material Authorization)
Address : A-1403, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of
Korea Zip 14322
Tel. +82-70-4222-5684
Website : www.apulsetech.com
Contact Info
Battery Indicator Indicates the battery condition of the product.
LED lights up when in WIFI, BT mode.
LED lights up when in USB, SERIAL mode.
LED lights up when in NORMAL, HID mode.
Smartphone cradle adsorption pad.
Read and write data on RFID tags.
Connect with smartphones and tablets.
Shows the status of the product, such as connection
mode and battery.
B / W
Power
Button
α712 can be turned on and o.
Mode
Button
Select communication mode
(USB, BLUETOOTH, WIFI, SERIAL, etc.)
U / S
N / H
This button selects RFID Single Reading
Mode or Multi Reading Mode.
Button to attempt to connect α712 to a WIFI AP
Increase the volume or RFID power level.
The volume is set by default.
Lower the volume or RFID power level.
The volume is set by default.
FNC
WPS
UP
DOWN
Flourish LAMA
RFID Antenna
USB Cable
DISPLAY
>
>
w
F
b/w
n/h
u/s
2.4 Front view 2.5 Back view 2.6 Button
No. Item Description
No. Item Description
No. Item Description
w
F
b/w
n/h
u/s
It is recommended to use of the mobile device with Android
OS version 5.0 or later.
3.2 Bluetooth Connection
4. Information
3. Android Connections
If you have problem with α712, visit our web site to analyze the problem
or contact our partner in region or HQ.
Contact information is available at our website,
http://www.apulsetech.com
When requesting support, please have following information;
Before you use α712, please read this section of information
and keep your child aware of this information. For detailed
information, please refer to the safety guidelines.
・Do not use α712 during driving for safety.
・In medical sites, please follow the relevant regulations by turning o
your α712 when you are in medical sites.
・Please turn o your α712 or turn on planes mode when you are
boarding, to avoid wireless signals jamming aircraft control signal.
・Please turn o your α712 near the use of high precision electronic
equipment, otherwise it may lead to electronic equipment disability.
・Do not take apart your α712 or accessories without authorizing.
Only authorized institutions can repair this α712.
・Please keep α712 away from magnetic equipment. The radiation of
α712 will erase the information of the magnetic storage device.
・Please don’t use α712 under high temperature or in ammable areas
(example: gas station).
・Please keep your α712 and accessories away from children without
supervising.
・Serial number of the device ( On manufacturing label )
・Firmware version
4.1 Service information
Install the application on the PC and Mobile device to connect to α712
and refer to Android SDK User Guide.
α712 provides Demo Apps for function test and customer application
development.
Demo Apps may update or change without any notice.
For latest demo apps or support, please contact your regional partner or
visit our website.
Conrm that it is ready for Bluetooth connection by checking Bluetooth
LED light blinks on α712.
Enable Bluetooth function on the mobile device and pair it with α712.
When it paired, Bluetooth LED remains green.
Run “RFID/Barcode demo app” on your mobile device.
1. Run Demo app on the mobile device.
2. Select SPP mode from Bluetooth section.
3. Press SCAN button on the screen.
4. Select a searched device.
5. Control RFID or barcode scanner while BT in connected
For USB, WIFI connections, it is similar sequence . Connect α712 to a
device , run the demo application and select α712 device among the
list searched. Then scan barcodes or read RFID tags.
For more detialed setting information of demo application and others,
please refer to user guide and SDK user guide.
3.1 Demo Application
4.2 Safety information
・Please obey the relevant laws and regulations when you use your
α712, and respect others lawful rights and privacy.
・Please obey the relevant specication of this manual when you use
USB cable. Otherwise it may damage your α712 or personal computer.
・Modifying the device’s operating system or installing software from
unknown sources may cause device malfunction or data loss.
Improper or unauthorized use of the device voids your one-year
limited warranty.
Unless otherwise stated by Apulsetech in a sales agreement between Apulsetech and a
Partner, Hardware is warranted for a period of twelve (12) months, Battery and Accessory are
warranted for a period of six (6) months from date of shipment from Apulsetech.
Warranty Policy
Hardware cannot be warranted for cases below,
-Unathorized service partner or person repaired
-Damages by inappropriate opening, assembling, installation and part remove.
-Damages by customer abuse, negligence and misuse
-Damages by improper storage
-Damages by direct shock on LCD and touch pannel
-Damages by external shock on purpose
-Contaminated by water or other liquids including battery leakage
•When the prdouct is under warranty period,
There will be no charge to the customer for warranty repairs. Apulestech shall not be
responsible for any loss or damage of data, software programs or reinstallation of any
customer own program or data.
Customer is responsible for shipment to Apulsetech and assumes all costs and risks associated
with this transportation. Apulsetech shall be responsible for return shipment to customer,
unless Apulsetech determines that the hardware has no defect or is not under warranty.
•If the product is out of warranty,
Customer is responsible for both in/outbound shipment, also repairing charge including
material and service costs.
Hardware Warranty
Out of coverage
Apulsetech provides rmware, software including demoware which can be applicable to
customer software development. Firmware and Software are licensed“as is” with no warranty.
Customer shall download latest rmware or software, and get technical support from
http://www.apulsetech.com or contact our regional service partner.
Software / Firmware service
checks all hardware before shipment throughly, however in case it happens,
If the goods are found not operated or not properly working when it arrives, contact regional
sales manager rst to claim DOA.
DOA claim requires a submission thru on our website service & support page, you could enter
Parnter name, purchase order number and other information to processs the claim.
Or contact your regoinal sales manager to claim by email.
In general, submission of DOA claim must be within 2 weeks after shipment arrival.
For DOA claim, replacement or credit will be provided to customer AFTER receiving the faulty
goods from customer and Apulsetech completes the diagnostic process.
DOA (Dead on arrival) replacement
For warranty or Non-warranty repair, customer must apply RMA request form.
Prior to returning your defective product for repairs, an authorized RMA number must be
retained. To obtain an authorized RMA number you must ll out the RMA request form, which
directly.
Once this form is submitted, customer will receive a response within 24 hours with either: (1)
an RMA number; or (2) a request to provide additional details and information regarding the
defective product.
RMA (Return Material Authorization)
Address : A-1403, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of
Korea Zip 14322
Tel. +82-70-4222-5684
Website : www.apulsetech.com
Contact Info
Battery Indicator Indicates the battery condition of the product.
LED lights up when in WIFI, BT mode.
LED lights up when in USB, SERIAL mode.
LED lights up when in NORMAL, HID mode.
Smartphone cradle adsorption pad.
Read and write data on RFID tags.
Connect with smartphones and tablets.
Shows the status of the product, such as connection
mode and battery.
B / W
Power
Button
α712 can be turned on and o.
Mode
Button
Select communication mode
(USB, BLUETOOTH, WIFI, SERIAL, etc.)
U / S
N / H
This button selects RFID Single Reading
Mode or Multi Reading Mode.
Button to attempt to connect α712 to a WIFI AP
Increase the volume or RFID power level.
The volume is set by default.
Lower the volume or RFID power level.
The volume is set by default.
FNC
WPS
UP
DOWN
Flourish LAMA
RFID Antenna
USB Cable
DISPLAY
>
>
w
F
b/w
n/h
u/s
2.4 Front view 2.5 Back view 2.6 Button
No. Item Description
No. Item Description
No. Item Description
Table of contents
Other Apulsetech RFID System manuals
