APW Wyott Design Features
• Top heat - 2100 Watt ceramic infrared heat system
• Bottom heat - 3400 Watt calrod element
• Programmable menu options in digital solid state control
system
• Thermostatically controlled cooling fan system
• Conveyor belt direction switch to reverse flow of food
• Product entry and exit chamber doors, adjustable to 3 7/8” high
• Removable entry and exit shelves that extend from the end of
the conveyor
• Removable crumb trays
PRODUCT: QUANTITY: ITEM #:
Model: XWAV1829EZ
Designed Smart
Built Solid Options
X*WAV-EZ®1829
Pass-Through Conveyor Oven
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800)
527-2100
·
(214)
421-7366
·
Fax
(214)
565-0976
·
www
.apwwyott.com·
[email protected]Rev. 3/17/2006
X*WAV-EZ®1829 Pass-Through Conveyor Oven
Heat Systems…the X*Treme Difference!
• The X*WAV-EZ®ceramic heat system has over 31% more efficiency
in its InfraRed Energy vs. Quartz based units.
• X*WAV-EZ®heat system is a concentrated, focused source of
radiant energy that consistently sends InfraRed evenly toward the
conveyor belt...at both high and low temperature levels…InfraRed
efficiency is 96%!
X*Treme Control!
• X*WAV-EZ®cooking control system utilizes a programmable Solid
State Digital Control that has 99 menu options.
• Choosing a menu option will automatically adjust the heat settings,
both top and bottom, and the conveyor speed.
Operations that are X*Tremely Easy & Efficient!
• Conveyor speed can be set between speeds that are slow
(12 minutes) to a maximum speed of 30 seconds.
• Conveyor direction can be reversed with switch on side of conveyor.
• Crumb trays are provided on either end of the toaster. 12” Extended
Conveyor shelves are supplied for both “entrance or exit” areas...
allowing easy loading and off-loading of products.
• Fully insulated top and sides provide “Cool to the Touch” exteriors...
Thermostatically controlled fan keeps exterior surface cool even
when unit is turned off.
• X*WAV-EZ®control panel is recessed vs. the “exposed” control
panel on the competition…reducing inadvertent bumps on control
buttons that change the performance speed or temperature.
Built to Last
• X*WAV-EZ®Ceramic heaters last significantly longer than Quartz
Elements and do not have the issue of shattered glass in your
operation.
• Bottom heat is provided by a calrod element that can easily
handle drippings and grease. Competitive units use quartz
elements that can shatter with grease drippings.
• Brushless DC conveyor motor is long lasting.
Reliability backed by APW Wyott’s Warranty
• Certified by the following agencies:
• Stacking Kit (94000189)
• End Stop (PS0044)
See reverse side for product specifications.