Aqara T1 User manual

01
Single Switch Module T1 (No Neutral) Quick Start Guide
11
󲊓󹝻󹝻󹠁󴝘󲛦󽘘󵎢󱙆󳘮󶬢󽘙󳗐󸷀󱮧󹝭󳬘󱻣
20
Einzelschaltmodul T1 (ohne Neutrallinie) Schnellstartanleitung
32
Guide de démarrage rapide de Single Switch Module T1 (No Neutral)
Guía de inicio rápido de módulo de interruptor único T1 (sin neutro) 44
55
Guida Rapida dell’Avviamento Modulo Switch Singolare T1
(senza cavo neutro)
67


79
󽘘󽘙


Product Introduction
Aqara Single Switch Module T1 (No Neutral) is based on the Zigbee 3.0 wireless


work with other Aqara smart devices to realize more smart scenes.
* This device requires a compatible Zigbee 3.0 hub.





Connect to Network



Indicator Light
Button
Antenna
01

Warnings
1.
2.
3.
4.

6.
7.

9.
Do not cover when the plug is working.

Do not connect in series.


Do NOT use in humid environments or outdoors.

Do NOT place this product near a heat source. Do NOT place it in an enclosure





losses.
02

1.
Installation

installation!






Method 1: L1 is connected to the load wire. S0 and S1 are connected to the two

03



connected to S0, and the other end is connected to the live wire. L is connected to

the original switch, which is connected to the load wire, can be connected to S0 to

Diagram 1


  
04




Diagram 2 Diagram 3


  


  


2. 

3. 


touch it, and replace or repair it in time.



06

Quick Setup
1. 
app downloaded and the Aqara Hub installed.
4. Turn on the main power switch, and press the button on the module or on the







on the ceiling or inside the lights, the antenna should avoid too much shielding.

damaged.
07

Indicator Light Description
2. Please open the app, tap “Home” and then tap “+” in the top right corner to

Neutral)”, and add it according to instructions.





Indicator Light Status Status Description
 Device power on
 Zigbee network is connecting
Blue light keeps on 
 


Specifications

Dimensions: 42.9 × 40 × 21.4 mm（）


（）


Online Customer Service: www.aqara.com/support




 Zigbee network is not connected
09