Aqua One Versalight User manual

Step By Step Guide
Precision Manufactured in the P.R.C.
Designed in Australia by Aqua One
Distributed in Australia by:
Kong's (Aust.) Pty. Limited
48 Williamson Rd. Ingleburn
2565 NSW Australia
Distributed in New Zealand by:
Kong's (NZ) Limited
52 Glenlyon Avenue, Greerton
Tauranga New Zealand
Distributed in Hong Kong by:
Kong’s Aquarium Supplies Co., Ltd
No 31, 3/F Thriving Industrial Centre
26-38 Sha Tsui Road, Tsuen Wan,
Hong Kong
Distributed in the UK by:
Kong’s (UK) Limited,
C/O Aqua Pacific UK Ltd.
PO Box 268
Romsey Hampshire
SO51 0WW
United Kingdom
www.aquaone.com.au
® Aqua One and Kong’s are registered trademarks.
1. Decide where you are going to position the light.
2. Mount the light on the aquarium and tighten the fastening screws. Hand tight
will be sufficient.
3.Ensure your hand is not wet, plug the transformer in to the power receptacle,
arrange a drip loop and turn on.
4. Turn the light switch on. It is located on the end of the unit.
5. The flexible mount gives you the ability to vary the intensity and angle of the
light.
6. Ensure your aquarium has a glass lid on it.
Know Your Light
a. Switch
b. Cover Screw
c. LED Lamps
d. Casing
e. Flexible Mount
f. Mounting Bracket
g. Fastening Screws
Instruction Version 10/01/2007
Drip Loop
a
b
c
f
e
d
g
Congratulations on your purchase of a quality Aqua One product. This product will last for many years under
normal usage the guarantee commences from the day of purchase. You must provide proof of purchase when you
submit your equipment for repair under guarantee.
The benefits given to the purchaser by the manufacturers guarantee are in addition to all other rights and remedies
which the purchaser has in respect of the equipment under the legislation of the appropriate country of purchase.
Your 2 year guarantee can be extended by a further 1 year upon registration with the distributor. This can be done
online at the address below or by completing the extended guarantee registration card and returning by post to the
address of your country of purchase. www.aquaone.com.au
General Guarantee Conditions:
1. All claims for guarantee service should be made to the place of purchase.
2. You must provide proof of purchase when you submit your equipment for repair under guarantee.
3. This guarantee extends only to defects occurring in materials or workmanship under normal use of the
equipment when operated in accordance with the supplied instructions.
4. Replacement equipment is guaranteed for the remainder of the original manufacturer’s guarantee period.
5. Guarantee does not cover:
a. Cost of freight, postage or the cost of insurance.
b. Service costs arising from failure to correctly adjust the controls of the product or to clean the hoses, filter media,
impellers, pump heads, failure to observe the manufacturer’s instructions or inspections that reveal that the
equipment is in normal working order.
c. Equipment failures caused by misuse, neglect, normal wear and tear, accidental breakage, repairs or
modification by unauthorised persons, lightning strikes, mains voltage fluctuation, earthquakes, vermin infestation
or liquid spillage.
d. Consumables, such as impellers, shafts, filter cartridges, filter media, sponges, wool, light tubes, lamps, bulbs
or starters.
e. In no event will the manufacturer or distributor of that country be liable for any consequential or incidental
damage including, but not limited to loss of livestock, property damage, damage to equipment, appliances or
furnishings arising from the use of this product or from failure of this product.
f. Damaged incurred in transit resulting from inadequate packing.
6. It is recommended that all equipment subject to claim should be prepared for transportation in its original
packaging or other suitable packaging which offers the same degree of protection.
Aqua One - 2 + 1 Year Guarantee

Important Safeguards
This appliance is not intended for use by children or infirm
persons without supervision. Young children should be
supervised to ensure that they do not play with the
appliance.
Warning: To guard against injury, basic safety precautions
should be observed, including the following:
1. Read and follow all safety instructions before using this
appliance.
2. Danger: To avoid possible electric shocks, special care should be
taken since water is employed in the use of aquarium equipment.
For each of the following situations do not attempt repairs yourself.
Return the appliance to an authorised service facility for service or
discard the appliance.
a) If the light falls into water, do not reach for it, unplug it and then
retrieve it. If the electrical components of the appliance get wet,
unplug the appliance immediately (non immersible equipment only).
b) If the aquarium shows any sign of abnormal water leakage,
immediately unplug all appliances from the power source.
c) Carefully examine the light after installation. It should not be
plugged in when there is water on parts which are not intended to be
wet.
d) Do not operate any aquarium product if it has a damaged cord or
plug, or if it is malfunctioning, or dropped or damaged in any
manner.
A “drip loop” (See the diagram) should be arranged by the user for
each cord connecting an aquarium component to a receptacle. The
drip loop is the part of the cord below the level of the receptacle or
the connector if an extension cord is used. It is used to prevent
water traveling along the cord and coming in contact with the
receptacle. If the plug or receptacle does get wet, do not unplug the
appliance. Disconnect the fuse or circuit breaker that supplies the
power to the appliance, then unplug and examine for presence of
water in the receptacle.
3. Close supervision is necessary when the appliance is used by or
near children.
4. Always unplug the light from the electrical outlet, when not in use,
before putting on or taking off parts, before any type of
maintenance,or cleaning. Never yank the transformer to pull it from
the outlet. Grasp the transformer and unplug to disconnect.
5. Do not use the light for reasons other than the intended use. The
use of attachments that are not recommended or sold by the light
manufacturer may cause the product to be unsafe. This is not
recommended.
6. Do not install or store the light where it will be exposed to weather
or temperatures below freezing.
7. Make sure any component mounted on a tank is securely
installed before operating it.
8. Read and observe all the important notices on the light.
9. Ensure input voltage is the same voltage as your local power
supply.
10. If an extension cord is necessary, a cord with a proper rating
should be used. Care should be taken to arrange the cord so that it
will not be tripped or pulled.
11. A G.F.C.I (Ground fault circuit interrupter) & surge protector is
recommended for all electrical appliances.
12. Ensure your hand is dry when turning the power switch on/off
and when inserting/removing the transformer from the receptacle.
13. If you are in any doubt about the electrical installation or safety
of this product you must consult a qualified electrician.
Before First Use / Preparation
VersaLight - LED 24 & 36
Drip loop
Hints & Tips for Best Results
Trouble shooting
For Guarantee Conditions, please refer to the Guarantee
conditions listed at the back of this instruction sheet.
Read and follow all the instructions, even if you feel you are familiar
with the product and find a place to keep the instructions handy for
future reference. Your attention is drawn particularly to the sections
concerning “IMPORTANT SAFEGUARDS” and the “GUARAN-
TEE CONDITIONS”. Please ensure you retain your original
purchase receipt in the event that guarantee service is required.
Carefully unpack the light making sure you keep all the packing
material until all the parts of the product have been found and the
product has been assembled.
This product is shipped to you in a factory sealed carton. Should the
product malfunction in any way or if the unit is damaged and
requires replacement, contact the retailer where the product was
purchased for inspection.
Lighting:
No more than 8 hours of light a day and definitely no natural light.
Longer light times will accelerate algae growth in the aquarium and
has no benefits to plants or fish.
LIGHT DOES NOT WORK
1. Ensure the transformer is inserted correctly and the switch is in
the on position.
LED Lamps have a life of about 500,000 hours. Under normal
operating conditions, this means they will last for more than 100
years. Therefore, this unit has been manufactured with irreplaceble-
able lamps.
In the unlikely event that the LED lamps fail, please refer to the
guarantee conditions on the back of this instruction sheet.
Changing the LED Lamps
Instruction version:- 26/02/2008