Aqua One Monarch 80 User manual

Monarch 80/100/120
Assembly instructions
Ex2 Fx16
Ax8 Bx8 Cx12 Dx2
Hx4
Tools required:
Ix8
Shelves
x 2
Hood
Contents:
Parts Required
Gx12
Base
Centre Panel
K
Left side Right side
L M
Left door Right door
P Q
Top back panel
Lower back panel
O
N
Top of Cabinet
Glass tray
U
Hood Insert
V
Tank insert x 2
W W
J
R
S
Glass Aquarium

B
K
L M
Base
J
A
Base
J
N
B
O
D
J
C
L M
J
R
C
K
N
O
Step 1: Base J and A x 8, B x 6
Step 3: Cabinet Lid R & C x 8
Step 2: Back panels O & N
B x 2, D x 2, C x 4, G x 4
Position the cabinet lid on the cabinet
construction, open side pointing upwards.
Line the screws C with the holes and
fasten, ensuring screw heads do not
stand proud.
Lower centre and
side panels onto
screws and
tighten clamps
by turning them
clockwise
N
O
M K L
G

P Q
H H
E
F
Insert shelves using
pins( I )
J
O
T
F
G
Step 4: Door Panels P & Q, H x 4, F x 8, E x 2
Step 5: Attach doors to cabinet and finish F x 8, G x 8, I x 8
Attach door handles
Fasten hinges H to door
panels using screws F
Attach doors to cabinet using
screws F and predrilled holes

S Place the aquarium on top of
cupboard by lifting it on from
the back and sliding it forward.
VERY IMPORTANT: DO NOT REMOVE THE
POLYSTYRENE ATTACHED TO THE BOTTOM
OF THE AQUARIUM!
Install Filter (see filter instructions for details)
Install Heater (see heater instructions for details)
Put glass tray Uon top of aquarium.
Install reflector lighting (see lighting instructions
for details)
Slide hood Sonto aquarium. Insert maintenance
lid Vinto the hood.
®
Aqua One and Kong’s are registered trademarks. www.aquaone.com.au.
©
Aqua One 2004
Precision Manufactured in the P.R.C.
Designed in Australia by Aqua One
Distributed in Australia by:
Kong's (Aust.) Pty. Limited
48 Williamson Rd. Ingleburn.
2565 NSW Australia.
Distributed in New Zealand by:
Kong's (NZ) Limited
52 Glenlyon Avenue.
Greerton. Tauranga New Zealand.
Distributed in the UK by:
Kong’s (UK) Ltd.
C/O Aqua Pacific UK Ltd.
PO Box 268
Romsey Hampshire
S051 0WW
United Kingdom
Important Notice
It is absolutely imperative that you ensure this cabinet and aquarium is installed upon level flooring. It is also a prerequisite that
you ensure the flooring upon which it is positioned is able to support the weight of this aquarium which could be up to 600kg
including water and decorations.
Installation upon uneven flooring will result in poor distribution of weight. Damages to the aquarium, cabinet or equipment and
damages caused by leaks due to improper or uneven installation are not covered by the guarantee with this product.
Care and Maintenance of your Aqua One Aquarium
Glass: It is recommended that you use a good quality glass cleaner and a non abrasive lint free cloth. Glass cleaner should only
be used on the outside of the aquarium.
To clean the glass on the inside of the aquarium, it is recommended that you use an Aqua One Scraper or Magnetic Cleaner
(available from your local Aqua One dealer).
Cabinet and Hood: The use of a damp cloth is recommended, do not use any detergents or harsh chemicals to clean the cabinet
and hood as damage may occur.
Step 6
cover
hood
light
glass tray
heater
canister
filter
U
V
Instruction version:- 22/02/2008