AQUAESTIL OLBIA User manual

1X
Upute za ugradnju
Installation Manual
Bags with components for the assembly
mod. OLBIA
Important notes
Although the material used in the construction of our products is
of the highest quality, they may be damaged by certain chemical
agents such as acetone or solvents in general.
During installation, it is advisable to protect the surfaces of the
product (such as the buthtub) using cardboard.
The shower box must be installed by qualifiedpersonnel.
The manufacturer declines all liability for damage or injury
to person or things caused by incorrect installation.
Važno
Iako je materijal koji se koristi u proizvodnji najbolje
kvalitete, može se oštetiti uporabom određenih
kemikalija, kao što su aceton i razgrađivači općenito.
Tijekom ugradnje, preporučuje se zaštiti proizvod (na
primjer kadu) kartonom.
Paravan mora ugraditi za to ovlaštena osoba.
Proizvođač ne odgovara za štetu ili ozljede osoba ili
stvari nastale nepravilnom ugradnjom.
Vrečica s dijelovima za montažu kabine
3 X 3 X 1X 1X
1X
1X
3,5 x 13
3,5 x 38
DX
SX

Fitting the compensation profile
strip
Position the compensation profile strip against the wall and
use a spirit level to check that it is vertical. Mark the positions of
the holes to be drilled in the wall through the holes pre-drilled in
the strip.
Remove the compensation profile strip, drill the holes and insert
the wall plugs. Apply a layer of silicone to the profile strip,
insert the internal section of the strip and secure both to the
wall using the screws.
Postavljanje zidnog profila
Naslonite profil uza zid i libelomprovjerite da je
vertikalno postavljen. Označite mjesta za bušenje na
zidu pomoću rupa već izbušenih na profilu.
Odmaknite profil, izbušite rupe u zidu i stavite tiple.
Nanesite sloj silikonskog kita na zadnju stranu
profila, postavite ga na zid i učvrstite vijcima.
Ø 6mm
FAZA 1
PHASE 1
16
FAZA 6
PHASE 6
Ø 6mm
A
B
C

C
Ø 3mm
AB
FAZA 2
PHASE 2
FAZA 5
PHASE 5
2
5
A
B
Ø 7mm
(*Ø 5,5mm)

Brtva
Gasket
FAZA 3
PHASE 3
FAZA 4
PHASE 4
4
3
Opcija A
Kada s oblogom
Option A
Bathtub with panel
Opcija B
Obzidana kada
Option B
Interspersed bathtub
Kliještima uhvatiti za vrh vijka i navinuti ga u rupu.
Catch the top of the bolt with tongs and put it in the hole