Aquatic Lifestyles Skimmer Filter MK II User manual

Skimmer Filter MK II
The Ultimate Pond Debris Remover
Pond Skimmer Filter Installation

Make sure the skimmer is level side to side & front to back.
Dry fit the two top corner screws
Clean both the back of the liner and the front of the skimmer bo .
Put a silione bead around the screw holes on the skimmer and
place the liner and weir door assembly against it.
(DO NOT put underlay between them) Fit all the screws and screw
up tight. Finally cut the liner out from the back.
Hint: Leave a fold of loose liner below the skimmer to allow for future
height adjustment

Adjustable overflow
Pump outlet
Debris net
Filter mat support
Filter mat
Weir door
Pump
Chamber
Automatic top-up
Valve positions
Cut a notch out for pump cable

Check valve
Automatic top-up
valve
Adjustable overflow
Pump
Aquatic Lifestyles
32 Belk Road
Tauranga New Zealand
Phone: [phone]
email: info aquaticlifestyles.co.nz