Aranet PRO User manual

Quick Start
Guide
Aranet PRO

SENSOR DATA
WIFI
LAN
12V
POWER FROM BATTERY
OFF ON LAN RESET
1. CHECK THE CONTENTS
OF THE BOX

PZ2
3. CONNECT POWER TO
THE DEVICE
2. ATTACH THE DEVICE TO
THE MOUNT
A
B
C
C
A
B

SENSOR DATA
WIFI
LAN
12V
POWER FROM BATTERY
OFF ON LAN RESET
Username: root
Password: changeme
THE DEFAULT
ADMINISTRATOR
LOGIN
5. CONNECT TO THE DEVICE
4. TURN THE DEVICE ON
1
2
3
ht tp://192.168.206.100
WiFi SSID “Aranet-******”
10 sec
SENS O R DATA
WIFI
LAN
12V
POWER FROM BATTERY
OFF ON LAN RESET
2
ON
1

Change your password, modify and add users
in the Users setting section.
Set the device time in the System > Time setting
section.
Scan the availability of the radio channel in the
Sensors > Radio setting section.
Pair your sensors by pressing the Add sensor
button in the Sensors > Sensors setting section.
Enter the Notifications setting section, to
configure your sms and/or e-mail notifications.
6. CONFIGURE THE DEVICE
Please refer to the Aranet PRO User Manual for
detailed instructions
https://aranet.com/product/aranet-pro/
user-manual/
To view Terms&Conditions visit
https://aranet.com/terms-and-conditions/
To view Returns&Guarantees visit
https://aranet.com/returns-guarantees/
To fill RMA form visit
https://aranet.com/rma/
ADDITIONAL RESOURCES
POWER FROM BATTERY

SUOMALAINEN
1Tarkista laatikon sisältö
2Liitä laite kiinnikkeeseen
3Kytke virta laitteeseen / PoE valinnainen lisävaruste
4Kytke laite päälle
5Yhdistä laitteeseen
6Määritä laitteen asetukset
Vaihda salasanasi, muuta ja lisää käyttäjät Users
asetusten osiossa.
Aseta laitteen aikaa System > Time asetusten osiossa.
Tarkista radiokanavien saatavuus Sensors > Radio
asetusten osiossa.
Muodosta laitepari painamalla Add sensor-painiketta
Sensors > Sensors asetusten osiossa.
Määritä sms ja/tai sähköposti-ilmoitukset Notifications
asetusten osiossa.
Nähdäksesi Aranet PRO Käyttöohjee ole hyvä ja käy sivulla
https://aranet.com/product/aranet-pro/user-manual/
SVENSKA
1Kontrollera innehållet i boxen
2Fäst enheten på fästet
3Anslut ström till enheten / Tillvalstillbehör för PoE
4Slå på enheten
5Anslut enheten
6Konfigurera enheten
Ändra ditt lösenord, konfigurera och lägg till användare i
inställningssektion Users.
Ställ in enhetstid i inställningssektion System > Time.
Utför skanning av tillgängliga radiokanaler i
inställningssektion Sensors > Radio.
Utför parning av dina sensorer genom att trycka på knappen
Add Sensor i inställningssektion Sensors > Sensors.
Gå in i inställningssektion Notifications för att konfigurera
dina SMS och/eller e-post anmälningar.
För att läsa Användarmanual av “Aranet PRO”, besök vänligen
https://aranet.com/product/aranet-pro/user-manual/

SCAN QR CODE TO SEE THE
ARANET PRO USER MANUAL
The information presented in this guide is the property of
SAF Tehnika, JSC. No part of this document may be
reproduced or transmitted without proper permission
from SAF Tehnika, JSC.
The specifications or information contained in this
document are subject to change without notice due to
continuing introduction of design improvements. If there is
any conflict between this document and compliance
statements, the latter will supersede this document.
SAF Tehnika, JSC has no liability for typing errors in this
document or damages of any kind that result from the use
of this document.
To get up to date information about accessories and their
availability, please contact sales representative.
Copyright © 2021 SAF Tehnika, JSC. All rights reserved.