ArcFamily Arc4Sports User manual

472
Box Lid
inner tray
411
258
478 319
Arc4Sports
User Manual

What Is Arc4Sports?
Arc4Sports is a compact, portable, battery operated device, which delivers drug free, non-invasive
treatment using Microcurrent Technology. Arc4Sports has EC Certification as a Class 11a Medical
Device.
What Can It Be Used For?
Microcurrent Technology can be used to facilitate the repair of all tissues, including tendons,
ligaments, fractures and wounds. In addition, it is effective at reducing pain.
How Does Arc4Sports Work?
When there is tissue damage and inflammation, the electrical resistance increases in that area,
and this affects normal cellular activity. Microcurrent Technology utilises electrical currents
measured in millionths of an amp (microamps) that mimic the body’s normal electrical circuitry.
This can dramatically increase ATP (energy) production in the cells of your body, and significantly
accelerates the tissue’s healing rate. The current is so low you cannot normally feel it.
Contents
1 What Is Arc4Sports?
What Can It Be Used For?
How Does Arc4Sports Work?
2 What Is In The Box?
3 Quick Start Guide
4 How To Turn The Delivery Unit ON / OFF
Turning Audible Beep Alert ON / OFF
5 Battery Charge Indication
6 Charging The Delivery Unit
7 After Use
Life Of The Sticky Electrode Pads
8 Guide To Treatment Options
9 Selecting The Treatment Options
Programming The Delivery Unit
Activating Delivery Of The Treatment Option
10 Warnings, Cautions And Contraindications
12 Troubleshooting
Consumables
13 Important Information
General Advice On The Pads And Straps
Cleaning
14 Disclaimers
Specifications
15 Warranty
Electromagnetic Compatibility
WEEE Statement
Standard Symbols 1

Quick Start Guide
*Please charge fully before first use.
1 Make sure you have received everything in the box (Page 2)
2 Attach sticky Electrode Pads to the Arm Strap using the press studs
3 Fully insert the Delivery Unit into the pouch and connect to the Arm Strap
4 Turn the Delivery Unit ON by pressing and holding the left-hand button until it beeps,
then release. The button will show green (Page 4)
5 Select desired Treatment Option 1-4 by single presses of the left-hand button
(Page 9)
6 Activate Treatment Option by pressing and releasing the right-hand button
7 Attach the Arm Strap – this has been designed to fit around the upper / lower arm or
lower leg only (wherever it is most comfortable)
8 Check for successful connectivity, and that the red light under the right-hand button
turns to a solid green light, as will the LED of the selected Treatment Option
9 After 30 seconds the green light under the right-hand button will turn OFF (to
conserve battery life). The green light of the appropriate LED will begin to flash and
continue to do so throughout the delivery programme
NB: Tighten the Arm Strap to a point where a connection is maintained and where it is
comfortable for the user
3
What Is In The Box?
Please check the seals when unpacking your Unit for the first time. If these are broken, please
contact the office on 01580 755504 and a replacement will be sent.
•1 x Delivery Unit
•1 x Arm Strap with press studs
•4 x Sticky Electrode Pads
•1 x Plug Charger
•1 x User Manual
In addition, and as an alternative to the sticky Electrode Pads:
•1 x Bottle of AE Conductive Gel
•2 x Carbon Rubber Electrodes (ArcPads)
Attach the Carbon Rubber Electrodes to the Arm Strap in the same way as the sticky Electrode Pads.
Before attaching the Arm Strap to the arm or leg, cover the surface of the Carbon Rubber Electrodes
with a thin film of the AE Conductive Gel.
After use, wipe the surface of the Carbon Rubber Electrodes with a damp cloth to remove all gel
residue.
2

Treatment Option indicator LEDs 1 – 4
Battery Charge Indication
When the Unit is turned ON all LEDs and BUTTONS
will momentarily illuminate GREEN then RED to
show they are functioning correctly.
Then the Treatment Option LEDs will flash GREEN or
AMBER for 3 seconds to indicate the percentage
charge remaining.
The LED of the last Treatment Option delivered will
then show AMBER.
100% charge
75% charge approx
50% charge approx
25% charge or less.
To be recharged after next Delivery Period
5
4
How To Turn The Delivery Unit ON
Insert the Delivery Unit into the pouch of the Arm Strap and connect with lead. Attach sticky
Electrode Pads using press studs and place on the arm/leg.
Press and hold the left-hand button until it beeps, then release. Once the battery charge indication
has been shown (a number of the LEDs will show GREEN for 3 seconds) the left-hand button will
light either GREEN or AMBER (along with one Treatment Option LED 1 – 4). After 30 seconds these
lights will flash to conserve battery life.
Green: Indicates the Delivery Unit has sufficient battery to deliver the next Treatment Option and
is ready to use
Amber: Indicates the Delivery Unit requires charging
How To Turn The Delivery Unit OFF
Press and hold the left-hand button. After a couple of seconds you will hear a confirmation beep,
then release. All lights will then turn OFF.
Turning Audible Beep Alert ON and OFF:
•Ensure the Delivery Unit is turned ON
•Press and hold both buttons at the same time
•After three seconds you will hear three short beeps
High-High-High = Audible Beep Alert enabled
High-High-Low = Audible Beep Alert disabled

7
Charging the Delivery Unit
Only use the Plug Charger supplied.
Insert the lead of the Plug Charger into the base of the Delivery Unit, then insert the Charger into
a wall socket, and switch ON. You will hear two short beeps. The left-hand button will indicate
Amber, as will the LED of the last Treatment Option delivered.
After a few seconds the button will begin to flash Amber and will continue to do so until the unit
is fully charged. A full charge takes approximately 4 – 5 hours.
During charging, the battery charge status will be indicated by the LEDs (1 – 4)
nnnnnnncharging first quarter (Left button flashing amber)
nnnnnncharging second quarter (Left button flashing amber)
nnnnncharging third quarter (Left button flashing amber)
nnnncharging fourth quarter (Left button flashing amber)
nnnn charging complete. Remain flashing for 5 minutes (Left button flashing green)
When the left-hand button has turned green your unit is fully charged and can be unplugged.
When your Delivery Unit is unplugged you will hear a beep to indicate that the unit is OFF.
A full charge will enable approximately 35 hours of treatment delivery.
Note: The Delivery Unit is supplied with the Audible Beep Alert ON.
If you require this function turned OFF, go to Page 4.
After Use
Always ensure that the Delivery Unit is switched OFF (if it has not already automatically turned
OFF). Place the sticky Electrode Pads back onto the plastic sheet.
Life Of The Sticky Electrode Pads
The Electrode Pads have been specifically designed for comfort and connectivity. They are fixed
to the Arm Strap with 2 press studs. The Electrode Pads are water based and can dry out if left
out in the open. If they lose their adhesive quality in this way, it is possible to reactivate their
adhesiveness by applying a fine spray of water. Replace the Electrode Pads when they stop sticking
as this can affect the connectivity of the Delivery Unit. They should be removed after each session.
Useful Tip – to best preserve your Electrode Pads and for ease of use - on first use, cut the plastic
film in half then, with film still in place connect to press studs on Arm Strap. Remove plastic film
before applying to the skin. At the end of each Treatment delivery, replace plastic film on pads
while not in use. This keeps them clean and maintains adhesiveness.
6

9
8
Guide To Treatment Options
The Arc4Sports uses two different sequences of electrical current, both delivered in two slightly
different ways (= 4 Treatment Options).
These TREATMENT OPTIONS are indicated by the 4 LEDs at the top of the Delivery Unit.
1. The first sequence (Treatment Options 1 and 2) is designed and intended to disperse
pain. This should be used for all initial TRAUMA.
2. The second sequence (Treatment Options 3 and 4) is designed to kick-start and
accelerate REPAIR, enabling rapid closure to all tissue with little (and often no) scar
tissue.
Treatment Protocols – Pain
Treatment Option 1. Use daily for 3 hours for 3 weeks.
It is expected that you would notice a tangible improvement within 3 weeks.
If this is not observed, or if the problem has not been fully resolved, please use
Treatment Option 2 for a further 3 weeks.
Tissue Repair
Treatment Option 1. Use daily for 3 hours, for 2 weeks. Follow this with:-
Treatment Option 2. Use daily for 3 hours, for 1 week. Follow this with:-
Treatment Option 3. Use daily for 3 hours, for 2 weeks. Follow this with:-
Treatment Option 4. Use daily for 3 hours, for 1 week.
If the problem has not fully resolved by the end of week 6, repeat the use of Treatment Options 3
and 4 as above (an additional 3 weeks)
Selecting The Treatment Options
Treatment Option 1 and 2 - pain, bruising,
swelling and inflammation.
Treatment Option 3 and 4 - tissue repair.
Programming The Delivery Unit
At the top of the Delivery Unit there are
4 Treatment Option LEDs.
To select your Treatment Option give a single
press/release of the left-hand button and
continue until the LED of the required
Treatment Option shows Amber.
As the Treatment Options are selected you
will hear a sequence of short, sharp beeps.
The number of beeps corresponds to the
Treatment Option selected.
For example, 3 beeps = Treatment Option 3.
Subsequently, when the Delivery Unit is first
switched ON, the LED corresponding to the
last Treatment Option delivered will show
Amber.
Activating Delivery Of The Treatment
Option
Give a single press / release of the right
hand button. This will begin delivery of a
3 hour Treatment Programme.
Once activated, the light under the left-hand
button will turn OFF and the light under the
right-hand button and the LED Treatment
Option indicator (1 – 4), will turn either:
Green: to indicate correct connectivity, and
delivery; or
Amber: to indicate no connectivity at one or
more of the Electrode Pads.
After 30 seconds, the light under the right-
hand button will turn OFF and the Treatment
Option Indicator LED (1 – 4) will begin to flash
green, and continue to do so throughout the
delivery period.
When the Treatment is complete the Unit will
beep and then automatically turn OFF.
The Treatment can be manually stopped at
any time by pressing and holding the right
hand button until it beeps.
Please consult a Physiotherapist if you
require guidance with rehabilitative
exercises.

1110
Warnings, Cautions and Contraindications
i) Contraindications
a. Do not use this device on people with a cardiac pacemaker, implanted defibrillator, or
other implanted electronic devices, because this may cause electrical interference.
b. Do not use this device on infants.
c. The safety of electrical stimulation during pregnancy has not been established.
d. Users with suspected or diagnosed epilepsy should follow precautions recommended
by their physicians.
ii) Warnings
a. Do not apply therapy directly over open wounds or rashes, or over swollen, red, infected,
inflamed areas, skin lesions or skin eruptions (e.g. phlebitis, thrombophlebitis, varicose
veins).
b. Do not apply therapy when in the bath or shower.
c. Do not apply therapy while driving, operating machinery, or during any activity in which
electrical stimulation can put the user at risk or injury.
d. Use of Arc4Sports is in addition to, and in no way a substitute for your normal, existing
practice of seeking help, guidance and support from your GP, or other Clinical
Practitioner.
e. Research shows that a minority percentage of the population are, or can become,
sensitised to the sticky electrode pads. In order to minimise the likelihood of any
sensitisation, we recommend that the arm/ or leg used be alternated daily.
f. Arc4Sports is only for use as directed.
g. Users should stop using the device and should consult with the Arc4Sports office if they
experience any adverse reactions to the device.
iii) Precautions
a. Users with suspected or diagnosed heart disease should follow precautions
recommended by their physicians.
b. Apply therapy only to normal, intact, clean, healthy skin.
c. Use caution if therapy is applied over areas of skin with less than normal sensitivity.
d. Keep this device out of the reach of children.
iv) General Warnings
a. Do not immerse any part of the unit in water.
b. Do not place the unit close to excessive heat.
c. Use this device only with the leads, electrodes and accessories recommended by the
manufacturer. Use of other parts or materials not supplied by the manufacturer will
invalidate the warranty.
d. Keep the device away from a fireplace or radiant heater, as the heat may affect the
device.
e. Temperature & Relative Humidity for storage and transportation: -20oC - +40oC, 8% -
70% R.H.
f. The use of Microcurrent Technology can cause dehydration. Please ensure that you
regularly drink fresh water when using Arc4Sports.
g. Use of Arc4Sports is in addition to, and in no way a substitute for, your normal, existing
practice of seeking help, guidance and support from your GP, or other Clinical Practitioner.

1312
Troubleshooting
If the Treatment Option indicator LED has changed from GREEN to AMBER during the treatment
AND left-hand button has lit up AMBER:
This indicates that there is insufficient power in the battery to complete delivery of the selected
treatment. Please charge the Delivery Unit.
OR the right-hand button has lit up AMBER:
This indicates a loss of connectivity. Either the lead has become disconnected or one, or both, of
the electrode pads is/are not making a good enough connection to the skin to complete the
circuit. Re-position the pads ensuring that there is enough adhesive.
Should you require any assistance please contact [e-mail]
Consumables:
The unit must be used only with the original accessories, supplied by the manufacturer.
Replacement accessories are available from www.Arc4Sports.com
Apart from these items, there are no user-serviceable parts or calibration.
•Maintenance and all repairs should only be carried out by Arc4Sports. The manufacturer will
not be held responsible for the results of maintenance or repairs by unauthorised persons.
•The user must not attempt any repairs to the device or accessories. Please contact Arc4Sports.
•Opening of the equipment by unauthorised persons is not allowed and will terminate any
claim to warranty.
•Check the unit before each use for signs of wear and/or damage. Replace worn items as
required.
Important Information
General advice on the pads and straps:
•Only put the Arm Strap on your arms or lower legs and no other part of your body.
•In order to obtain the best conductivity through the pads always ensure that they are in
good condition and adhesive.
•Before use make sure your skin is clean, dry and free of moisturising creams.
• Peel the sticky Electrode Pads from their protective plastic shield by holding and lifting one
corner of the pad and pulling. If the pads dry out then it is best to buy a replacement pack
of electrodes. In an emergency it may be possible to restore some of the adhesiveness of
the pad by adding a tiny drop of water on each pad and spreading around. In very hot
weather the gel on the pads may become soft. In such cases place the pads, still on their
plastic liners and in their bag, into a fridge until they return to their normal condition.
•Protect your Arc4Sports from wet and damp conditions. It is not waterproof.
•A PDF of this manual, along with further information, is available on our website:
www.Arc4Sports.com
•The 2 year Warranty period on your Delivery Unit will commence on the date of purchase.
Cleaning:
•The Arm Strap can be cleaned by wiping with a damp cloth, antibacterial wipe or mild
disinfectant. Wipe dry. DO NOT put your arm strap in the washing machine.
•DO NOT immerse your Arc4Sports in water.

1514
Warranty
Arc4Sports offers a 2-year guarantee on the Delivery Unit, commencing on the date of purchase.
In addition to your statutory rights, the manufacturer, Applied Microcurrent Technology Ltd agrees
that if any defect in materials or workmanship appears in this product within two years after the
original date of consumer purchase, it will be repaired or if necessary, replaced, free of charge.
This applies only if the product has been used for domestic purposes and has not been damaged
through misuse, accident or neglect and has not been modified or repaired by anyone other than
the manufacturer or its authorised agents.
If a defect appears, please make sure that the unit is being used in accordance with the
instructions. If so, return it with this warranty and the proof of purchase to Arc4Sports.
Exclusions: the Electrode Pads, Arm Strap and Plug Charger are not covered by this warranty –
only the Delivery Unit.
Electromagnetic Compatibility: Precautions
The equipment complies with the requirements of EN 60601-1-2, however, it should be noted,
hence it is recommended that close proximity to such devices (WiFi hubs, mobile and cordless
telephones, etc) be restricted during treatments.
WEEE Statement
The symbol on the product indicates that it should not be disposed of with your
normal household waste but should be taken to a designated collection point for
the recycling of waste electrical and electronic equipment.
Standard Symbols
Arc4Sports unit
Battery Li-ion Rechargeable, 3.7V (fully traceable) - non removable
Pad connection Via 2.1 x 5.5 mm (centre positive) plug on unit
Maximum Pad Voltage +/- 9 V
Programme selection Via push buttons
4 programmes
Pulse duration 0.11 msec
Pulse to pulse spacing 0.86 msec
Pulse polarity bipolar
Output channels Single channel
0 - 9 V (+/-), controlled to maintain the specified current
Max = 4V for R = 10kohm (typical)
Max = 0.2V for R = 500 ohms
Output current 0 - 400 uA
Tolerances All output parameters less than +/- 10%
Physical Dimensions: 45 mm (W) x 15 mm (D) x 105 mm (L)
Approximate weight: 65 g
Operating Temperature 0ºC to 40ºC
Storage Temperature 0ºC to 55ºC
Relative humidity 10 to 65%
IP rating IP 3X
Expected life of unit 5 years under normal usage
DC Power Supply
Via 2.1 x 5.5 mm (centre positive) plug on unit
(pads removed whilst charging)
Mains supply 100-240VAC, 50-60Hz, 0.15A
Output supply 12VDC, 0.5A
Compliance EN 60950
Modes
Output voltage
Connection
Disclaimers - Arc4Sports is only for use as directed.
Specifications:
Type BF Applied part Attention Complies with WEEE regulations CE marking Manufacturer

1716
Notes: Notes:

472
Box Lid
inner tray
411
258
478 319
[e-mail]
www.arc-family.com
EC Declaration of Conformity
The Arc4Sports Microcurrent Therapy System complies with the requirements of the
Medical Devices Directive 93/42/EEC as amended. Arc4Sports is considered to be a
Class 11a Medical device. Compliance has been demonstrated with reference to the
following harmonised standards
•EN 60601-1:2006+A12:2014
•EN 60601-2-10:2015.
•EN 60601-1-2: 2007+AC:2010
0088
2016/10 V.1