
8 / 12
This device is OT suitable to use it in an explosive environment (in the presence of
flammable substances such as gas, vapor, mist or dust, in atmospheric conditions when,
after ignition, the combustion is spread in the air).
The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the
reach of children or disabled persons since they represent potential sources of danger.
The installation/assembly of the device will be made/ or according to the indications of the
manufacturer. A wrong procedure may cause damages to persons, animals or objects, for
which the manufacturer cannot be considered responsible.
After removing the packaging, check the appliance for any signs of damage. In case of
visible damage, do not use it and contact a qualified technician.
Place and use the device on a horizontal and stable surface.
DO OT use or store the device near heat sources (heaters, stoves etc.).
DO OT dip the device in water or other liquids; in case the accidental fall in the water DO
OT try to take it out, but first of all unplug immediately the power cable from the socket.
If you use the device for the first time, make sure to remove any label or protective sheet
which blocks its proper functioning.
Plug and unplug the power cable with dry hands and hold it firmly.
Before plugging make sure the start button of the device is in the “OFF” position (turned off).
Always unplug the power cable to avoid the overheating and avoid stretching it (do not pull
it, tug it or use it to drag the device to which is connected).
Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be
damaged easily.
DO OT obstruct totally nor partially the air vents or inserts objects inside.
During the use the device must be keep at a safety distance from any object and/or
flammable or potentially explosive substance.
In case of a breakdown or malfunctioning of the appliance, disconnect it at once. Do not
attempt to repair it, but take it to a service centre approved by the manufacturer. Avoid
carrying out operations which are not specified in this manual (such as disassembling and/or
altering).
Always remember to unplug the power cable of the device if it is not used for a long period,
before storing, cleaning or performing any maintenance operation.
Store and use the device only indoor or in any case protected from weathering such as rain,
direct radiation of the sun and dust. The device is not design for the external use or storage.
Before unplugging the device, switch it off, using the proper command on the control panel.
DO OT hang the fan on the wall or ceiling unless this type of installation is provided and
explained in this manual.
Place the device at a proper distance from the objects or surrounding walls making sure that
its functioning will not cause accidental damages.
DO OT use the device near gas stoves or open flames in general.
DO OT use the device near curtains or textiles.
DO OT hang the fan on the wall or ceiling unless this type of installation
is provided and explained in this manual.
DO OT cover the device during functioning.
DO OT insert objects or body parts inside the protection grille of the fan.
DO OT leave the device unsupervised for a long period during functioning.
DO OT expose yourself for a long period to the air flow generated by the device because
it can cause damage to the health.
If the fan must be stored for a long period and is not used regularly, place the fan in its
original packaging in a dry place. When you use it for the first time after a long period of
inactivity, make sure the fan is clean and the motor blades turn feely (with the device not
powered) without any restraint.