Ardisam 3515D User manual

TECHNICAL MANUAL
3515D
ARDISAM
ARDISAM, INC.
MOWERS ★POWER AUGERS ★ROTOTILLERS ★
1360 1st Avenue; P.O. Box 666
Cumberland, Wisconsin 54829
[phone] Fax [phone]
1-800-3456-007
MANUFACTURER
OF THE YEAR
AWAR D WINNER
1996
ARDISAM, INC.

Rev. 5.97 Page 2
3515D Handlebar Assembly3515D Handlebar Assembly
3515D Handlebar Assembly3515D Handlebar Assembly
3515D Handlebar Assembly

Rev. 5.97
Page 3
3515D Handlebar Assembly3515D Handlebar Assembly
3515D Handlebar Assembly3515D Handlebar Assembly
3515D Handlebar Assembly
Part # Description Qty.
199 HANDLE GRIP-Drive Control Lever 2
305 HANDLE GRIP-Handlebar 2
306R HANDLEBAR ASSY w/1 TAB, Red 1
510R PLATE-Height Adjustment Bracket, Red 1
719 LOCKWASHER-Spring, 3/8" 1
1501 BOLT-Hex Flange Head, 5/16"-18 x 3/4" 2
1512R COVER- Transmission Wheel Housing, Red 1
2102 BOLT-Hex Hd, 3/8"-16 x 1", Grade 5 3
2104 NUT-Hex, 3/8"-16 2
53530 SPRING-Bee Hive, Forward Cable Adjust 1
53572A DRIVE CONTROL LEVER 1
53575 BRACKET-Drive Control Lever, Right 1
53575A BRACKET-Drive Control Lever, Left 1
53596 CABLE ASSEMBLY 1
53606 NUT-Nyloc, #10 1
53607 NUT-Jam, 5/16"-24 2
IB5810 BOLT-Hex Hd, 5mm x 0.8mm x 10mm 4
IN58 NUT-Nyloc, 5mm x 0.8mm 4
LBL304GS DECAL-Handlebar Dash, Garden Star 1
LBL413B DECAL-Console (Forward Instructions) 1
WF38 WASHER-Flat, 3/8" 1
WF516 WASHER-Flat, 5/16" 2

Rev. 5.97 Page 4
3515D Tines & Hood Assembly3515D Tines & Hood Assembly
3515D Tines & Hood Assembly3515D Tines & Hood Assembly
3515D Tines & Hood Assembly

Rev. 5.97
Page 5
3515D Tines & Hood Assembly3515D Tines & Hood Assembly
3515D Tines & Hood Assembly3515D Tines & Hood Assembly
3515D Tines & Hood Assembly
Part # Description Qty.
401 DEPTH REGULATOR LEVER, Red 1
402R BRACKET-Depth Regulator, Red, S/N <5030 1
406R BRACKET-Depth Regulator, Red, S/N >5029 1
409 DETENT PIN, 5/16" 1
410 BOLT-Hex Flange Head, 5/16"-18 x 1/2", Grade 5 2
414R HOOD-Tiller, w/o Decals, Red, S/N >5029 1
415A HOOD-Tiller, w/o Decals, Red, S/N <5030 1
417 BOLT-Hex Hd, 5/16"-18 x 1/2", Grade 5 2
504 LOCKWASHER-Spring, 5/16" 2
509 BOLT-Hex Hd, 1/4"-20 x 1/2" 2
719 LOCKWASHER-Spring, 3/8" 16
1900B KIT-Bolo Tine Holder, Assembled, Red 1
1901B KIT-Bolo Tine, w/o Holders, Red 1
2001 BOLT-Hex Hd, 3/8"-16 x 1-3/4" 2
2003G BOLO TINE, Right Side, Red 8
2004G BOLO TINE, Left Side, Red 8
2101G HOLDER-Bolo Tine, Both Sides, Red 2
2102 BOLT-Hex Hd, 3/8"-16 x 1", Grade 5 16
2104 LOCKNUT-Hex, 3/8"-16 18
LBL516AA DECAL-Tine Hood (Operating Instructions) 1
LBL516E DECAL-Tine Hood Flap (Danger) 1

Rev. 5.97 Page 6
3515D Motor Mount Assembly3515D Motor Mount Assembly
3515D Motor Mount Assembly3515D Motor Mount Assembly
3515D Motor Mount Assembly

Rev. 5.97
Page 7
3515D Motor Mount Assembly3515D Motor Mount Assembly
3515D Motor Mount Assembly3515D Motor Mount Assembly
3515D Motor Mount Assembly
Part # Description Qty.
60G56 NUT, 5/16"-18 6
112 BOLT-Lockwasher Hd, 5/16"-18 x 1-1/4" 1
501 ENGINE-Briggs & Stratton, 3.5HP 1
504 LOCKWASHER-Spring, 5/16" 8
506G BRACKET-Motor Mount, Right, Red 1
507G BRACKET-Motor Mount, Left, Red 1
508R LOWER PULLEY GUARD, Red 1
510R PLATE-Height Adjustment Bracket, Red 1
719 LOCKWASHER-Spring, 3/8" 2
722 SPACER-Engine Pulley 1
724 PULLEY-Engine Forward 1
727 BELT-Forward 1
728 GUIDE-Belt, Forward 1
801 PULLEY-Transmission 1
802 BOLT-Hex Hd, 5/16"-24 x 3/4", Grade 5 2
803 WASHER, 5/16" ID x 1-5/8" OD, Engine Pulley 2
804 KEY, 3/16" x 1" 2
805 WASHER-Flat, 11/16" ID, Transmission Pulley 2
1101S WHEEL/TIRE ASSEMBLY, Left Side 1
1102S WHEEL/TIRE ASSEMBLY, Right Side 1
1103 LOCKPIN 2
1202 WING NUT, 5/16"-18 2
1203R SHROUD-Belt Cover w/Decal, Red 1
1402 BOLT-Soc Hd, 5/16"-18 x 1-1/4" 4
1423 BOLT-Hex Hd, 5/16"-18 x 2", Grade 5 1
1501 BOLT-Hex Flange Head, 5/16"-18 x 3/4", Grade 5 5
2102 BOLT-Hex Hd, 3/8"-16 x 1", Grade 5 2
8655 BOLT-Hex Hd, 5/16"-18 x 1-3/4" 4
53522 SPACER, 1/2" x 11/16" ID 1
GUARD GUARD-Bumper, Red Only (Optional) 1
LBL516C DECAL-Belt Cover Shroud (Warning) 1
WF516 WASHER-Flat, 5/16" 2

Rev. 5.97 Page 8
3515D T3515D T
3515D T3515D T
3515D Transmission Assemblyransmission Assembly
ransmission Assemblyransmission Assembly
ransmission Assembly
Part # Description Qty.
402R BRACKET-Depth Regulator, Red, S/N <5030 1
406R BRACKET-Depth Regulator, Red, S/N >5029 1
1500B TRANSMISSION ASSEMBLY, Red, Wheelpin, S/N <5030 1
1500T TRANSMISSION ASSEMBLY, Red, Wheelpin, S/N >5029 1
1501 BOLT-Hex Flange Hd, 5/16"-18 x 3/4", Grade 5 8
1504 GASKET-Tiller Housing & Transmission Cover 2
1505 PIPE PLUG-Soc Hd, 1/4"-18, Oil Level 2
1506 SEAL-Tiller Housing 4
1507 GASKET-Front Rear Bearing Cap 2
1508R CAP-Rear Bearing, Red 1
1510 PLUG-Oil Fill, Plastic 1
1511 BOLT-Hex Flange Hd, 1/4"-20 x 7/8" 3
1512R COVER-Transmission Wheel Housing, Red 1
1514R CAP-Front Bearing, Red 1
1515 OIL SEAL-Drive Shaft 1
1516 BOLT-Hex Flange Hd, 1/4"-20 x 3/4" 3
1517 KIT-Oil Seal Gasket (Includes two #1504, four #1506, two #1507, one #1515) 1
1690 TRANSMISSION LUBE 00, 1 Qt. 1

Rev. 5.97
Page 9
3515D Shifting Mechanism Assembly3515D Shifting Mechanism Assembly
3515D Shifting Mechanism Assembly3515D Shifting Mechanism Assembly
3515D Shifting Mechanism Assembly
Part # Description Qty.
60G56 NUT, 5/16"-18 2
112 BOLT-Lockwasher Hd, 5/16"-18 x 1-1/4" 1
509 BOLT-Hex Hd, 1/4"-20 x 1/2" 1
1406G MOUNTING BAR-Shifting Mechanism, w/Forward Belt Guide, Red 1
1406R MOUNTING BAR-Shifting Mechanism, Red 1
1407 SPRING-Idler Arm 1
1408 PULLEY-Forward Idler 1
1412 IDLER ARM-Forward, Red 1
1416 LINK PIN, Forward 1
1418 COTTER PIN 1
1423 BOLT-Hex Hd, 5/16"-18 x 2, Grade 5 1
1424 BUSHING-Pivot, 5/16" 1
1512R COVER-Transmission Wheel Housing, Red 1
2104 NUT-Hex, 3/8"-16 1
53576R BRACKET-Cable Mount, Red 1
53596 CABLE ASSEMBLY 1
53596A CLAMP-Cable 1
53596B YOKE-Cable 1
WF38 WASHER-Flat, 3/8" 3

Rev. 5.97 Page 10
3515D Wheel & Tiller Shaft Assembly3515D Wheel & Tiller Shaft Assembly
3515D Wheel & Tiller Shaft Assembly3515D Wheel & Tiller Shaft Assembly
3515D Wheel & Tiller Shaft Assembly
Part # Description Qty.
1506 SEAL-Tiller Housing 4
1508R CAP-Rear Bearing, Red 1
1515 OIL SEAL-Drive Shaft 1
1600A MAIN DRIVE SHAFT 1
1601 BEARING-Tapered (Includes Cone & Race) 2
1700A WHEEL SHAFT ASSEMBLY 1
1701 KEY, 1/4" x 1" 2
1702 GEAR-Worm, Wheel Shaft 1
1703 SHIM SET-Axle Spacer Kit 4
1704 BUSHING 4
1705 SHIM, 1.375 OD x .062" thick, (as req'd.)
1706 SHIM, 1.375 OD x .030" thick, (as req'd.)
1707 SHIM, 1.375 OD x .015" thick, (as req'd.)
1708 SHIM, 1.375 OD x .010" thick, (as req'd.)
1710 SNAP RING-Retainer, External 2
1801A TILLER SHAFT ASSEMBLY 1
1803 GEAR-Worm, Tiller Shaft 1
1804 SPACER, 1.250" x 1.000" x .062" thick 4
1805 SHIM SET-Rear Bearing Cap 1
1806 SHIM, 1.750 OD x .062" thick, (as req'd.)
1807 SHIM, 1.750 OD x .030" thick, (as req'd.)
1808 SHIM, 1.750 OD x .015" thick, (as req'd.)
1809 SHIM, 1.750 OD x .010" thick, (as req'd.)
1810 SNAP RING-Retainer, Internal 4

Rev. 5.97
Page 11
Additional copies of this manual and the Operator's
Manual for your unit are available. The Technical Manual
shows all of the assemblies and individual parts as
exploded views which show the relationship of the parts
and how they go together.
Contact Ardisam at 1-800-3456-007. Have the following
information on the form at the right available when
phoning in your request.
Model: __________________________________________________
M/N (Mfg. No.): ___________________________________________
S/N (Serial #): ____________________________________________
Your Name: ______________________________________________
Address: ________________________________________________
City, State, Zip: ___________________________________________
Visa/Mastercard No.: ______________________________________
Card Expiration Date: ______________________________________
Manual AManual A
Manual AManual A
Manual Availabilityvailability
vailabilityvailability
vailability

TM3515D
Rev. 5/97
© Copyright 1997 Ardisam, Inc.
All Rights Reserved. Printed in USA.