ENGLISH
• Do not push products into the appliance by fingers while it is in operation. If food becomes lodged in feeder tube, use pusher to push it down.
If this doesn’t work, turn the motor off, unplug unit, and then disassemble juice extractor to remove remaining food.
• Do not run juice extractor continuously for longer than 10 minute. Turn off switch and let it rest for at least 10 minute to cool down the motor,
otherwise the motor may be damaged.
• Every time make sure that the appliance is unplugged and all moving parts with motor are stopped completely before disassembling and cleaning.
• Be sure to switch off the unit after each use.
• Do not overload appliance with products.
• If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before
turning it on.
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence
significantly the product safety, performance, and functions.
• Save this instruction manual.
Caution: Not following these important safeguards can lead to the breaking of the juicer, injuries, electroshock, short circuit or fire.
OPERATION
CLEANING, MAINTENANCE AND STORAGE
WARRANTY TERMS
• ASSEMBLING:
• Before the assembling be sure that the device isn’t connected to the power supply.
• Place the separating unit on the motor unit, push with both hands on the separating unit until it clicks into place.
• Insert the filter; turn it clockwise to fit securely.
• Mount the lid and fasten the locks.
• Place the pulp container under the cover, and the glass – under the beak for juice.
• Install the lid foam separator on the juice container. It serves to remove foam from juice while it is being poured.
• Plug the appliance to the power supply.
DISMANTLING:
• Unplug the appliance from the power supply.
• Open the locks.
• Remove the transparent lid, pull the grating filter upwards, then take off separating unit. While doing this, hold it by the beak from below and
by the underside of the top of the unit on the other side.
• Before starting make sure that the juicer is switched off and transparent lid fixed properly.
• Wash fruits and vegetables thoroughly. Cut fruits into small pieces so as to be fitted into the feeding tube. Remove the stone or peel from those citrus and fruit: prunes
apricots, cherries or oranges, lemons, melons, etc.
• Plug cord into the wall socket. Switch on the appliance and choose desired speed:
• – Speed I: for soft foods (pears, strawberries, oranges, plums, grapefruit, lemon, grapes, marrows and pumpkins, cherries, onions, cucumbers, garlic).
• – Speed II: for hard foods (artichokes, carrots, fennel, apples, beets, potatoes, pineapple, cabbages, leeks, celery, spinach).
• Feed the pre-prepared fruits and vegetables into the juice extractor and press down gently with the pusher. NEVER USE FINGERS OR OTHER THINGS AS A PUSHER.
• The motor must always be running after fruit or vegetables were fed into the appliance.
• When pulp container or juice jug is full, switch off the power and empty containers before continuing the process.
• CAUTION:
• The juice extractor cannot process bananas, peaches, apricots, mangos, papayas, etc.
• The juice extractor cannot process coconuts or other hard food.
• When process is completed, switch off and unplug the unit.
Remove and wash all removable parts in warm soapy water. Rinse filter assembly from under side for easy removal of residue from strainer
holes. Do not use a dishwasher or very hot water.
• Do not use steel woods, abrasive cleaners or scouring pad on appliance.
• To clean the outside of the motor unit, use a damp sponge.
• Never immerse the body in water.
• Some vegetables, such as carrots, may cause discoloration of the plastic. Reduce this by washing parts immediately after use with small
amount of non-abrasive cleaner on a cloth, rub gently, then rinse well and dry.
• The grating filter must be replaced as soon as any signs of damage or wear and tear appear.
To avoid damages, transport the unit in original package only.
STORAGE
• Store assembled cleaned and dried juice extractor in a dry place.
The symbol on the unit, packing materials and/or documentations means used electrical and electronic units and battery’s should not be toss
in the garbage with ordinary household garbage. These units should be passed to special receiving point. For additional information about
actual system of the garbage collection address to the local authority. Valid utilization will help to save valuable resources and avoid negative
work on the public health and environment which happens with incorrect using garbage.
When purchasing the product, ask for it to be checked in your presence. Without the having a warranty card or when it is not properly filled in,
the quality claims are not accepted, and no warranty repair is performed. The warranty card should be presented at any address to the service
center during the whole warranty period. The product is accepted for service in a complete set only. The warranty period is calculated from the
moment of sale to the buyer. Keep the documents confirming the date of purchase of the product (cash receipt).
The condition of free warranty service of your product is its correct operation, which does not go beyond personal domestic needs, in accordance
with the requirements of the operating instructions for the product, the absence of mechanical damages and the consequences of careless
handling of the product.
The product is accepted for warranty service in its pure form. The warranty covers all manufacturing and construction defects (except those
listed in the "Warranty does not apply" section), identified during the warranty period. During this period defective parts, except consumables,
are subject to free replacement in the warranty service center.
THE GUARANTEE DOES NOT COVER:
1. Defects caused by force majeure.
2. Damage to the product caused by the use of the product for purposes that go beyond personal domestic needs (ie industrial or commercial purposes).
3. Consumables and accessories (sections, etc.).
4. Defects caused by overloading, improper operation, penetration of liquids, dust of insects, ingress of foreign objects into the product.
5. Products that have been repaired outside authorized service centers or warranty workshops.
6. Damage resulting from changes in the design of the product by the user or unqualified replacement of his components.
7. Mechanical damages, including due to negligent handling, improper transportation and storage, falling of the product.
8. Violation of the operating instructions.
9. Incorrect installation of mains voltage (if required).
10. Making technical changes.
11. Damage through the fault of animals (including rodents and insects).
Production month: December 2017
For warranty service, please contact your nearest service center.
