Argos Home 403/9448 User manual

403/9448
Issue 2 - 03/16/20
50cm
13cm
60cm
Mirrored Core Cabinet 2 Door
3

3 .

Components - Panels
Please check you have all the panels listed below
2
If you have damaged or missing components,
call the Customer Helpline:03456 400800
12 Left side panel x 1
5 Bottom panel x 1 6 Adjustable shelf x 2
7 Back panel x 2 8 Door panel x 2
Right side panel x 1 3Back rail x 1
4Top panel x 1

3
Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
Locking pin x 4
Plastic support x 8
Locking nut x 4
Wooden dowel x 12
Hinge x 4
Ruler - Use this ruler to help correctly identify the screws
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
(medium & large)
Phillips screwdriver Small
hammer
Ruler/tape
measure
6mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Hammer Drill
(Only for dril hole on the wall)
AB C
DE F
G
Pad x 4 H-joint x 1
JK
Cam cap x 4
H I
Flatblade screwdriver
(medium)
Φ4 x 12mm Screw x 24
Φ4 x 45mm Screw x 2
Wall plug(for solid wall only) x 2

Assembly Instructions
4
Step 1
b:
Insert 6 x wooden dowel to right
side panel as shown.
Repeat above step to fix left side
panel to the unit as shown.
c:
Connect two back panels by
H-joint as shown, and carefully
slide the back panels into the
grooves of the unit.
Attach top panel , bottom
panel and back rail to right
side panel as shown.
Insert 2 x locking nut into top
panel and bottom panel .
Use a screwdriver to turn the
locking nut clockwise to lock.
Assembling side panels
53
4
1
1
2
1
1
2
2
b:
c:
a:
a:
Screw 4 x locking pin into left
side panel and right side panel
.
1
2
3
A
A
B
B
E
E
E
7
NOTE:It would be useful to ask
someone to help you at this stage.
B
K
K
B
2
5
3
4
7
7
7
7

Assembly Instructions
Step 2
5
Assembling adjustable panel
NOTE:It would be useful to ask
someone to help you at this stage.
Step 3
NOTE:It would be useful to ask
someone to help you at this stage.
6
F
Use 45mm screw and wall plug
to fix the unit on the wall as
shown.
H
G
Use 4 x cam cap to cover the
visible cams as shown.
Insert 8 x plastic support into
left side panel and right side panel.
Carefully put the adjustable shelves
on it.
I
I
I
G
H
6
6
I
F
Fixing om the wall

C
D
8
a:
a:
Use 4 x screw to fix 2 x hinge
onto door panel .
D
D
D
8
C1
C1
C1
C2
C2
Adjust the door up or down, left or
right, in or out if needed as shown:
1. Loosen two screws and adjust
the door up or down, then fix
screws again.
2. Loosen screw and adjust the
door in or out, then fix screw
again(loose screw clockwise
first help to adjust door in or out if
needed).
3. Loosen screw and adjust the
door left or right, then fix screw
again.
4.Screw 2 x screw into the side
panel as shown.-
D
D
b:
Carefully attach door panel
to the unit by fixing hinge onto
side panel with 12mm screws .
D
C2
C1
Assembling door panel
1
2
3
4
8
8
CD
8
b:
NOTE:It would be useful to ask
someone to help you at this stage.
After above assembly, please
double check and make sure all
screws are firmly fixed before use.
A
6
Assembly Instructions
Step 8
Step 4
NOTE:If you have damaged or missing components,
call the Customer Helpline:03456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
Stick 4 x pad onto door panel
as shown.
J
J
D

A Guide to -Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5:
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
responsibility of the installer.