Argos Home 417/7317 Datasheet

Assembly lnstructions - Please keep for future reference 417/7317
Dimensions
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts,call the Customer helpline: 0345 6400800
Width - 75cm
Depth - 50cm
Height - 160cm
Issue 1-04/22/15
Single Covered ClothesRailChintz

Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed on
page 2.
• Remove all fittings from the
plastic bags and separate them into
their groups.
• Keep children and animals away
from the work area, small parts
could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting
• Do not stand or put over
weight on the parts this
could cause damage.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on this
unit.
•This product should not be
discarded with household waste.
take to your local authority waste
disposal centre.
•Assemble the unit as close to its
final position (in the same room)
as possible.
•Assemble on a soft level surface
to avoid damaging the unit or your
floor.
• Warning: Before drilling,check
the wall for hidden pipes and
cables.
• Warning: Max loading weight
Hanging rail -11 kg
• Dispose of all packaging carefully
and responsibly.
• Parts of the assembly will be
easier with 2 people.
• If using power tools, please
follow the safety instructions
supplied with the tools.
• We do not
recommend the use
of power drill/drivers
for inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
!
1

1.Corner x 4 2. Thin rods x 4 (74.5cm)
3. Hanging rod x 1 (74.5cm) 4. Rod x 4 (79.5cm)
5. Rod x 4 (79.5cm)
6. Cover x 1
7. Shelf x 1
Taper ended

Assembly Instructions
3
Step 1
Bottom panel
Top panel
d: Attach thin hanging rod 3 .
notched rods 5 and thin rods
2 to the corner as shown.
Assemble the top panel
and bottom panel.
Note: It would be useful to
ask some one to help you at
this stage.
4
1
1
1
1
1
22
2
2
2
7
7
2
2
3
2
1
4
55
55
44
a:
b:
c:
d:
c: Attach rods 4 to the
corner as shown .
a: Insert thin rods 2 into the
fabric shelf 7 .
b: Attach thin rods 2 and
the fabric shelf 7 to the
corner 1 as shown.
taper ended
taper ended

Assembly Instructions
4
Step 2
6
a:
b:
Fitting the panel
a: Position the top
assembly onto the bottom
assembly.
Fitting the Cover
b: Fitting the cover 6
into the bottom panel.
Note: It would be useful
to ask someone to help
you at this stage.
C: Evenly slide the cover
down to the base.
Fasten the ties at bottom.
Note: It is recommended
that two people fit the
cover voer the frame.

Assembly Instructions
5
Step 5
Fixing to wall
It is recommended that
the wardrobe is fixed to
a wall.
Mark the fixing hole on
the wall and remove the
wardrobe. Drill a hole and
insert a wall plug .
Before drilling,
check the wall for
hidden pipes and
cables.
Reposition the wardrobe
and fix the wall strap
using screw .
The assembly is now
complete.
Warning:
Note:
The correct type of fixing
must be used for your
wall,seek professional
advice if doubt.
B
A
!
B
A
Top panel
wall
If you need help or have damaged or missing parts,call the Customer helpline: 0345 6400800