Argos Home Phoenix Wall Desk 455/5991 Datasheet

Assembly lnstructions - Please keep for future reference
Phoenix Wall Desk
Width - 80cm
Depth - 60 cm
Height -180.5 cm
Dimensions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1-13-10-15
455/5991
497/4479
498/1307
460/6613

carefully and responsibly.
1
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Keep this instructions for future
use.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Do not stand or put excessive
weight on the product, this
could cause damage.

Components - Parts lf you have damaged or missing components.
call the Customer Helpline:
0345 6400 800
1
2
Desk Top x 1
(77x60x1.8cm)
2Lower Divider x 2
(33x27.4x1.5cm)
3Lower Shelf x 1
(77x27.5x1.5cm)
4Base Panel x 1
(77x29.3x1.5cm)
5Upper Divider
(Left And Right) x 2
(19.3x11.6x1.5cm)
6Top Horizontal Rail X 1
(77x11.7x1.5cm)
7Top Shelf x 1
(77x21.2x1.5cm)
8Upper Shelf x 1
(77x26.5x1.5cm)
9Drawer Divider x 1
(24.7x11.5x1.5cm)
10 Drawer Shelf x 1
(77x23.5x1.5cm)
11 Middle Divider x 1
(32.9x23.2x1.5cm)
12 Side Panel (Right)x 1
(180.6x40x1.5cm)

14 Upper Divider (Middle) x 1 15 Drawer Side (Right) x 2 Drawer Side (Left) x 2
(21.3x9x1.2cm) (21.3x9x1.2cm)
17 Drawer Back x 2
(34.9x8.9x1.2cm)
19 Drawer Base x 2
(35.6x20.8x0.3cm)
20
Lower Back Panel x 2
(77.7x34x0.3cm)
21 Middle Back Panel x 1
(77.7x47.4x0.3cm)
22 Upper Back Panel （Extra hole）x 1
(77.7x46.7x0.3cm)
18 Drawer Front x 2
(37.4x11.1x1.5cm)
16
(19.3x11.6x1.5cm)
Side Panel (Left) x 1
(180.6x40x1.5cm)
Components - Parts lf you have damaged or missing components.
call the Customer Helpline:
0345 6400 800
13
3

4
0345 6400 800
BC
DEF
A
F
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6 Ruler/tape measure
Components - Fittings
Metal dowel x 14 Large locking nut x 6
Small locking nut x 8
Plastic drawer runner x 4
Sticker x (24+2)
Short 30mm wooden dowel x 46
Phillips screwdriver
(Not supplied)
Long 50mm wooden dowel x 4
35mm screw x 49
screw x 2
20mm screw x 2
16mm screw x 14
10mm screw x 3
Wall Strap x 2
Crosshead nut x 4
10mm screw x 8
53mm screw x 4 Allen Key x 1
F
GF
HF
I
Plastic trim x 1 Handle x 2
F
KF
L
F
PF
Q
F
SF
T
F
U
F
R
Plastic Drawer Stop x 4 Plastic Bracket x 14
F
M
F
J
F
NF
O
F
V
Sticker x (6+2)

5
Preparing panels
Assembly Instructions
Place desk top flat onto
the floor with
the fixing holes facing up.
Insert short wooden dowels
into desk top as
shown.
A
B
Preparing panels
Screw metal dowels
into desk top as shown.
Note: Screw metal
dowels as far as shown.
Do not overtighten.
Place lower divider flat
onto the floor with the fixing
holes facing up.
Insert short wooden dowels
into each side as shown.
x 2
A
1
1
1
1
2
2
A
A
B
B

6
Assembly Instructions
With help, locate lower
divider to the underside
of desk top as shown.
Insert large locking nuts
into the holes in lower
divider .
.
Turn locking nuts
clockwise to secure.
C
Preparing panels
Preparing panels
Note: Screw metal
dowels as far as shown.
Do not overtighten.
1
1
2
2
2
3
3
3
3
A
B
B
C
C
Place lower shelf flat
onto the floor with the fixing
holes facing up.
Insert short wooden dowels
into lower shelf as
shown.
A
B
Screw metal dowels
into lower shelf as
shown.
C

7
Assembly Instructions
With help, assemble lower
shelf to lower divider
using screws .
D
Preparing panels
With help, assemble base
panel to the remaining
lower divider using
screws .
D
Preparing panels
1
2
2
2
2
2
3
3
D
D
4
4
4
4
A
Insert short wooden dowels
into the ends of base
panel .
Groove on inside
Note: Ensure the groove
along one edge of base panel
is on the same side as
lower divider .
A

8
Assembly Instructions
Step 7
Step 8
x 2
5
A
2
3
3
4
4
C
With help, assemble
lower divider and base
panel assembly , to the
lower shelf as shown.
Insert large locking nuts
into one side of lower
divider .
Turn locking nuts
clockwise to secure.
C
Preparing panels
2
2
C
C
Groove
Groove
Preparing panels
Insert short wooden dowels
into both upper dividers
(left and right) as shown.
A
5

9
Assembly Instructions
Step 9
Step 10
With help, assemble both
upper dividers (left and
right) ,to top horizontal
rail using screws .
Preparing panels
6
Preparing panels
Insert short wooden dowels
into top horizontal rail
as shown.
A6
A
5
5
5
6
6
D
D

10
Assembly Instructions
Step 11
Step 12
Preparing panels
Insert short wooden dowels
into the ends of top shelf
as shown.
A
With help, assemble
top shelf to upper
dividers (left and right)
and top horizontal rail
using screws as shown.
Note: Ensure the groove
along one edge of top shelf
is facing down as shown.
Preparing panels
7
7
A
5
5
5
6
6
7
7
7
D
D
Groove

11
Assembly Instructions
Step 13
Step 14
Preparing panels
Insert short wooden dowels
into the ends of upper
shelf as shown.
A
Fitting drawer runners
With help, assemble plastic
drawer runners to both
sides of drawer divider
using screws .
Insert short wooden dowels
into the side of drawer
divider as shown.
8
8A
A
A
9
9
9E
E
F
F

12
Assembly Instructions
Step 15
Step 16
With help, assemble upper
shelf to drawer divider
using screws .
D
Preparing panels
Preparing panels
Insert short wooden dowels
into each end of drawer
shelf .
A
B
Screw metal dowels
into drawer shelf as
shown.
Note: Screw metal
dowels as far as shown.
Do not overtighten.
8
8
9
9
D
10
10
10
A
B
B

13
Assembly Instructions
Step 17
Step 18
Preparing panels
Insert long wooden dowels
into middle divider as
shown.
V
With help, assemble drawer
shelf to middle divider
using screws .
D
Preparing panels
11
11
11
11
V
10
10
D

14
Assembly Instructions
Step 19
Step 20
With help, locate the drawer
divider and upper shelf
assembly, onto drawer
shelf .
Insert large locking nuts
into the holes in one side
of drawer divider .
C
Turn locking nuts
clockwise to secure.
C
Preparing panels
With help, assemble
middle divider ,to the top
shelf assembly ( )
using screws .
Preparing panels
8
8
9
9
9
10
10
11
C
C
7
7
11
11
D
D
5
5
5
6
6

15
Assembly Instructions
Step 21
Step 22
Preparing panels
With help, assemble plastic
drawer runners to left and
right side panels and ,
using screws as shown.
13
E
Assembling side panel
Carefully align all
sub-assemblies together as
shown.
With help, locate left side
panel into position and
secure using fixings
and as shown.
D
H
G
1
3
4
7
8
10
13
13
13
D
EE
F
F
G
H
I
12
12
E
E
F

16
Assembly Instructions
12
13
20
20
21
21
22
22
Step 23
Step 24
With help, slide lower back
panels , middle back
panel and upper back
panel into position as
shown.
20
20
Insert plastic trim in
between lower back panels
as shown.
Fitting back panels
Assembling side panel
D
G
H
I
J
J
With help, carefully turn
the wall desk over onto it's
side as shown.
Warning: The wall
desk is heavy. Lift with
care.
With help, locate right side
panel into position and
secure using fixings
and as shown.
D
H
G
12

17
Assembly Instructions
Step 25
Fitting divider
Locate upper divider into
the central position at the
top of the unit and secure
from behind using screws .
D
D
14
14

18
Assembly Instructions
20
22
Step 26
Securing back panels
With help , stand the wall
desk upright.
Warning: The desk is
heavy. Lift with care .
a: Secure back panels
and using screws as
shown.
a:
b:
20
20
22
b: Ensure the desk is
straight and square.
Fit plastic brackets
around the edges of all
back panels as shown.
Use screws to secure.
O
P
U
U
P
O

19
Assembly Instructions
Step 27
Fixing to wall
It is recommended that the
wall desk is fixed to the
wall to ensure stability.
Assemble wall straps
to the back of top
horizontal rail using
screws .
Q
6
Q
R
R
With help, move the unit
to the desired location.
Mark the fixing hole
locations on the wall and
remove the unit.
Drill the wall and fit
suitable plugs for your wall
type.
Note: Wall plugs are not
supplied.
Warning: Before
drilling. Check the wall for
hidden pipes or
cables.Re-position the
unit and secure the wall
straps to the wall.
Note: Screws are not
supplied.
6