Argos Home Kent 275/8934 User manual

Kent
Issue 2- 1/11/19
Spare Parts
www.argos-support.co.uk
[email protected]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Product Details
275/8934
620/3519
324/0812
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
•From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
●Regularly check and ensure that all bolts and fittings are tightend properly.
●This product is compliant BS4875-7
•This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.

Bag 1
Fittings (Shown to scale)
2
A
Nylon strap 300 mm x 1
B
Mounting plate x 2
C
20 mm Screw x 2

Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium)
Ruler/tape
measure
Power Drill
Drill Heads
3
Tools required

4
1
2

5
A
B
B
C
C
WALL
*USE APPROPRIATE
FASTENER BASED UPON
WALL COMPOSITION
This product could be dangerous if incorrectly installed.
Installation of this product is only to be carried out by a competent person.
Check the suitability of the wall and check that the fastening devices will
withstand the forces generated.
3
Mounting plate x 220mm Screw x 2
Nylon strap 300 mm x 1
A
BC
Nylon strap 300 mm x 1
A
Mounting plate x 2
B
20 mm Screw x 2
C

6
A Guide to - Wall Mounting &Fixings
Important note:
Types of walls
Care &
Maintenance
enera Purpose wa p ugNo.1 “““ Geenneerraalll PPuurrppoossee””” wwaalll lll pplll uugg No.3 “““ CCaavviii ttyy FFiii xxiii nngg””” wwaalll lll pplll uuggCav ty F x ng wa p ug
No.4 “““ CCaavviii ttyy FFiii xxiii nngg--HHHeeaavvyy
DDuuttyy””” wwaalll lll pplll uugg
Cav ty F x ng- eavy
Duty wa p ug
No.5 “““ HHHaammmmmmeerr FFiii xxiii nngg””” wwaalll lll pplll uugga er F x ng wa p ug
No.2 “““ PPlll aasstteerrbbooaarrdd””” wwaalll lll pplll uuggP asterboard wa p ug
Generally aerated blocks should
not be used to support heavy
loads, use a specialist ftting in this
case. For light loads, general
purpose wall plugs can be used.
For use with heavier loads such as
TV& HiFi speakers and satelite
dishes etc.
For use with plasterboard parti-
tions or hollow wooden doors.
For use when ftting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer fxing
allows it to be fxed to the wall
rather than the plasterboard.
Always check the fxing is secure to
the retaining wall.
For use when attaching light loads
on to plasterboard partitions.
Safety: Always check the ftting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the ftting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are
made of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always check
that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall
plug if you are not sure.
2: Ensure you use the recommended drill bit to match
the wall plug and hole size.
3: Ensure you drill the hole horizontally, do not force the
drill or enlarge the hole.
4: Take extra care when drilling high walls, ceilings and
ceramic tiles. Ensure wall plugs are inserted beyond the
thickness of the ceramic tiles to avoid the tiles splitting
or cracking.
5: Ensure wall plugs are well ftted and are a tight ft
in the drilled hole.
If plastic wall plugs
are supplied with
your product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a
qualifed tradesperson if you are unsure.
- these are only suitable
for use in masonry walls.
If you are in any doubt
about the correct wall
plugs for your wall, seek
professional advice.
Failure of the product
due to using incorrect fx-
ings is the responsibility
of the installer.
S A r”wa pugNo.6 “““ SShhiii eelll dd AAnncchhoorr”” wwaalll lll pplll uugg
HHHeeaavvyy lll ooaaddss