Ariens 72406500 User manual

SNOW
ACCESSORIES
GUIDE

www.ariens.com
FRONT WEIGHT KIT
CLEAN-OUT KIT
NON-ABRASIVE SKID SHOE KIT
CLEAN-OUT KIT WITH BRUSH
72406500 For use on Ariens® 932, 924, 926 and 921 Series Sno-Thro® models (except for 20" housings)
Adds 10 lbs. to the front of your Sno-ro to equalize weight distribution
and holds the scraper blade closer to the ground.
■ Enhances balance and adds extra weight to get a cleaner surface while throwing snow
■ Enhances operator comfort
72407100 For use on Ariens® 2-Stage Sno-Thro® models
Allows you to easily and safely remove snow and ice from the discharge chute and impeller.
■ Long reach and durable construction keeps hands away while cleaning the most tightly packed snow
■ Contoured handle prevents hands in gloves or mittens from losing their grip
■ Mounting bracket and hardware are included for easy installation
72600300 For use on Ariens® Sno-Thro® models
is innovation protects the decorative surfaces around the outside of your home
when using your Ariens Sno-ro.
■ Durable polyethylene material resists wear while providing protection from scratching
and marring the decorative surfaces surrounding your home
■ Two skid shoes and the hardware needed to install the kit are included
ACCESSORIES
72408100 For use on Ariens® 2-Stage Sno-Thro® models
is convenient tool is a shovel, a scraper and a brush all in one making it easy to
remove build up on your Ariens Sno-ro from a variety of winter conditions.
■ Brush feature allows user to clean off snow from outside of the Sno-Thro after use without
damaging finish
■ Includes scraper bar for chipping and scraping ice easily
■ Provides tool to safely remove snow and ice from the discharge chute and impeller
■ Comes complete with mounting bracket and hardware for easy installation if your Sno-Thro
is not currently equipped with one
■ Can be mounted to most other manufacturer’s snow throwers as an enhancement

All contents are subject to change. Please refer to the dealer extranet for the most up-to-date information and specific model fit up references.
TRACK DRIVE CONVERSION KIT
CHUTE CRANK KIT
ACCESSORIES
ARIENS SNOTHRO® COVER
ELECTRIC START KIT
72600500 For use on Ariens® 926 Series Sno-Thro® models
Convert your Ariens Sno-ro into a Track Drive unit. is innovative
positive-traction system design gives you undefeatable power and
traction and smooth maneuverability.
■ Perfect for use on slopes and intense winter conditions.
73203600 Compact and Single Stage – For use on Ariens® Compact & Single Stage units
with housings 26" or smaller.
72600200 Deluxe and Professional – For use on Ariens® Professional & Deluxe units with
housings 26" or larger.
Waterproof, washable and tear-resistant, this Ariens-branded cover protects your
Sno-ro when it is not in use.
■ Fabric has a canvas feel and is made of rugged 600 denier polyester with urethane backing
■ Two fully adjustable 1” polyester straps with a quick-release buckle
■ Large vent to encourage air flow and prevent moisture build-up
73203200 For use on Ariens® 932040, 932043, 932048, 932140
73900100 For use on Ariens® 939001, 939002
73800300 For use on Ariens 938010, 938015, 938016, 938019, 938305, 938400
For manual handle chute rotation Sno-thro models. is kit will convert this type
of chute rotation into a crank style rotation.
■ Places discharged snow with pinpoint accuracy
■ Chute rotates 220° from the operator position
72403600 For use on Ariens® Sno-Thro® models with a 4 Cycle 8 to 11.5 HP Tecumseh® Engine
72200600 For use on Ariens® Sno-Thro® models with a 4 Cycle 5 to 7.5 HP Tecumseh® Engine
73800100 For use on Ariens® Sno-Thro® models with a 2 Cycle Tecumseh® Engine
Makes it easy for family members to help clear snow by having your Sno-ro start
with the push of a button instead of the pull of a recoil rope.
■ Turn over the engine in even the coldest conditions when oil is thick and carburetors
are temperamental
■ Provides years of reliable and easy engine starting

www.ariens.com
DRIFT CUTTER KITS
PROTECTIVE FLOOR MAT
ACCESSORIES
72408000 For use on all 2-Stage Ariens Sno-Thro models
Extra roomy, rugged powder coated steel frame Deluxe Sno-ro Cab protects
against heavy snow, wind and snow blow back.
■ Fast installation, no drilling and installs with hand tools
■ Zip-open front fits over crank handles
■ Freeze-resistant super clear windows
■ Cab does not require weight kit
72100800 For use on 921 Series Deluxe Ariens Sno-Thro models except 921011 and 921014
Allows the operator to keep their hands warm on cold winter days with built-in
heated handle grips.
■ Keep warm on the coldest days
■ This low cost upgrade can help make the decision on unit purchase
73203100 For use on Ariens® 920, 924, 932 & 939 Series Sno-Thro® models
72406900 For use on Ariens® 921 & 926 Series Sno-Thro® models
Help your Sno-ro tackle drifting and packed snow. Extend the bars to cut drifts and
direct snow into the auger. Rotate the bars down and out of the way for regular use.
■ Wing knobs and integrated design allow you to install the bars yourself and adjust them
without the use of tools
■ Extends the reach of your Sno-Thro to cut the toughest snow down to size
■ Directs snow drifts into the auger housing for quick discharge
70706700 For use with most Ariens® Sno-Thro® models
Designed to provide a protective layer between your Sno-ro
and flooring surface during storage.
■ Durable rubber mat is made out of textured recycled materials and has a raised edge
to keep melting snow contained, preventing a hazardous, slippery floor
■ Floor surface is protected from gas, oil, rust spots and scratches
■ Mat is nine square feet, making it suitable for most Sno-Thro models
ARIENS® BRANDED SNOTHRO® CAB
HANDWARMER ACCESSORY KIT

All contents are subject to change. Please refer to the dealer extranet for the most up-to-date information and specific model fit up references.
TECUMSEH®ENGINE MAINTENANCE KITS
BRIGGS & STRATTON®ENGINE MAINTENANCE KIT
ACCESSORIES
72601000 For use on all Ariens® Sno-Thro® models with Tecumseh® OHV Engines
72407900 For use on all Ariens Sno-Thro models with a Tecumseh® L-Head Engines
EACH KIT INCLUDES:
■ 32oz. Winter Blend 4 cycle oil – specifically designed for hard working, air-cooled engines used in
cold climates
■ L-Head or OHV Spark Plug – Equivalent of a Champion RJ19LM or RN4C
■ Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
■ Spare ignition key – Push/Pull key for Tecumseh® Engines
72100700 For use on all Ariens® Sno-Thro® models with Briggs & Stratton® OHV Engines
EACH KIT INCLUDES:
■ Ariens 32oz. 5W30 engine oil – specifically designed for hard working, air-cooled engines used in cold climates
■ Spark Plug – equivalent of a Champion QCIZYC
■ Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
■ Spare ignition key – Push/Pull key for Briggs & Stratton® OHV engines
72000300 For use on all Sno-Tek models with LCT® Storm Force 208cc Engines
EACH KIT INCLUDES:
■ Ariens 32oz. 5W30 engine oil – specifically designed for hard working, air-cooled engines used
in cold climates
■ Spark Plug – equivalent of a Champion RN9YC
■ Ultra-Fresh® Fuel Stabilizer – safe, non-toxic granular formula keeps gasoline fresh
■ Spare ignition key – Push/Pull key for LCT® Storm Force 208cc engines
SNO-TEK™ ENGINE MAINTENANCE KIT
MELTBUDDY™
72601200 For use on all Ariens® Sno-Thro® models
Allows operators to clear snow and spread ice melt in a single pass. e MeltBuddy
has an easy-to-use hand trigger and large capacity hopper which allows operators
to drop ice-melt granules where needed.
■ Universal mounting for easy attachment on almost any manufacturer's snow blower
■ Durable high density polyethylene survives the most extreme winter conditions
■ Snap-locking hopper cover keeps blowing snow out and away from the ice melting product
of your choice

2009
© 2009 Ariens Company.
® Registered trademark of Ariens Company.
Printed in U.S.A.
www.ariens.com
Phone: [phone]
Email: [e-mail]
ACCESSORIES
GUIDE