Arlo Q User manual

Quick Start Guide
Arlo Q™

Welcome
Thank you for choosing Arlo Q.
Getting started is easy.

5
4
What’s Included
Arlo Q
camera
4 mounting
screws
Micro USB
2.0 cable
USB power
adapter
Wall-mount
plate
TOP
USB cable
Plug In Your Camera
Connect one end of the USB cable to the port on the camera.
Plug the other end of the USB cable into the adapter.
Plug the USB adapter into a wall socket and wait for the camera
LED to blink amber.
The camera and the wall socket must be indoors.

7
6
Get the App
For the best experience, download the Arlo app for your
smartphone by scanning this QR code or searching for Arlo in the
app store.
arlo.netgear.com
Get a New Account
Already set up an account? See Add Devices to an Existing
Account on page 8.
Launch the app from your
smartphone and tap the New
System Setup button. Follow
the onscreen instructions.
Or from a computer, visit
arlo.netgear.com and click the
New System Setup button.
Select Arlo Q.
Available AFTER beta

9
8
Add Devices to an Existing Account
1. Launch the Arlo app and log in to your account.
2. Tap the Add Device button, select Arlo Q, and follow the
onscreen instructions.
Connect Your Camera
Follow the onscreen instructions either from the Arlo app or
from a computer to connect your camera directly to your router.
Note: If you own an Arlo wire-free system, do not connect your
Arlo Q camera to the Arlo base station.

11
10
Place Your Camera
You can place your camera on a shelf or other flat surface, or
you can mount it on the wall.
The camera and the wall socket must be indoors.
Note: The camera base includes a magnet that can help position
the camera on a metal surface.
If you are mounting the camera on a wall, place the wall plate
and secure it in place with four screws.
Slide the camera into the wall plate.

13
12
You’re Done!
Congratulations! Your Arlo Q camera is set up and ready to go.
To view useful tutorial videos, find troubleshooting tips, or get
support, visit support.arlo.com.
Camera LED Guide
Solid purple
The camera is
connected to a WiFi
network. However, it
is not connected to
the Internet.
Blinking purple
The camera is too
far away from the
router.
Blinking blue/
amber
A firmware update
is in progress. DO
NOT TURN OFF THE
CAMERA.
Fast blinking
amber
The camera is not
connected to a
WiFi network yet.
Solid amber
The camera is
booting.
O
The camera is
powered o.
Slow blinking
amber
The camera is
powered on and is
ready for setup.
Solid blue
The camera is
powered on and is
connected to Arlo
servers.
Slow blinking
blue
The camera is
connecting to a
WiFi network.
Fast blinking
blue
The camera is
connecting to Arlo
servers.

Notes

©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of
NETGEAR, Inc.
Compliance
January 2018
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3
University Technology Centre
Curraheen Road, Cork, Ireland
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For the current EU Declaration of Conformity, visit
kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit netgear.com/about/regulatory/