ARM KEIL MCBSTM32F400 User manual

Copyright © 2015 ARM Ltd. All rights reserved.
Quick Start Guide
MCBSTM32F400
Install Keil MDK Version 5
Download and install the MDK Core from www.keil.com/mdk5/install
Add Software Pack using the Pack Installer
Keil::STM32F4xx_DFP –STMicroelectronics STM32F4 Series Device Support
Power up the board
Connect a USB power supply to the Power receptacle
Connect the board to the PC using the Trace Connector and a debug adapter, for example ULINKpro
Verify Installation using example projects provided in the Software Pack
Copy an example using the Pack Installer. Compile, download to Flash, and debug the application. The
provided examples are ready to run.
More Information
Evaluation Board Description www.keil.com/boards2/keil/mcbstm32f400
MCBSTM32F200/400 User’s Guide www.keil.com/support/man/docs/mcbstm32f200
Related Products
MDK Version 5 www.keil.com/mdk5
MDK-Professional Middleware www.keil.com/mdk5/middleware

Copyright © 2015 ARM Ltd. All rights reserved.
Debug and Trace Configuration
MCBSTM32F400
ULINKpro Debug and Trace Adapter
Connect ULINKpro to the
board’s Trace connector and
choose ULINK Pro Cortex
Debugger.
Trace Settings
Configure trace by selecting the
Trace tab and enter the correct
CPU Core Clock speed as
specified in your project. Check
the Trace Enable box.
For complete instruction trace,
select Sync Trace Port with
4-bit data and enable ETM
Trace Enable.
More Information
Getting Started User’s Guide www.keil.com/gsg
Click Settings and configure the Debug connection for Serial Wire
Debug (SWD) by selecting the Port SW.