ARMAC MARTIN Small Digbeth Latch User manual

0121 359 2111 | armacmartin.co.uk | [email protected]
How to install your Small Digbeth Latch
Contents
Latch - x1
Snap off screws - x4
Tools Required
- Appropriate safety equipment i.e. safety glasses
- Spirit level
- Drill
- Screwdriver
- Tape measure
- Pencil
We recommend tting is carried out by a suitably qualied tradesman.
Please note, this product is rear-xed so please ensure this is suitable for your application.

Step One -Mark Holes
Mark out the xing holes using the hole pattern shown below.
Drill holes with a 4mm drill.
Step Two -Drill Holes
Cut the rear x M4 screws to the appropriate size for the cabinet. Place M4
snap off screws into holes from the inside of the cabinet.
Step Three -Insert Screws

Offer up the cabinet latch to the M4 snap off screws and x to the cabinet
securely.
Step Four -Fix Latch
Finish Care & Cleaning
Thank you for purchasing your Brass Latch from Armac
Martin. Our products are of the nest quality and hand nished.
Please follow the below care guide to maintain the
condition of the product.
Wipe your product down with a soft dry cloth
Do not use abrasive cleaners, ammoniated products, rubbing
alcohol, detergents, astringents, bleach based cleaners, aggressive
chemicals, abrasive cleaning pads, or harsh polishes on the
product

0121 359 2111 | armacmartin.co.uk | [email protected]
How to install your Large Digbeth Latch
Contents
Latch - x1
Snap off screws - x4
Tools Required
- Appropriate safety equipment i.e. safety glasses
- Spirit level
- Drill
- Screwdriver
- Tape measure
- Pencil
We recommend tting is carried out by a suitably qualied tradesman.
Please note, this product is rear-xed so please ensure this is suitable for your application.

Step One -Mark Holes
Mark out the xing holes using the hole pattern shown below.
Drill holes with a 4mm drill.
Step Two -Drill Holes
Cut the rear x M4 screws to the appropriate size for the cabinet. Place M4
snap off screws into holes from the inside of the cabinet.
Step Three -Insert Screws

Offer up the cabinet latch to the M4 snap off screws and x to the cabinet
securely.
Step Four -Fix Latch
Finish Care & Cleaning
Thank you for purchasing your Brass Latch from Armac
Martin. Our products are of the nest quality and hand nished.
Please follow the below care guide to maintain the
condition of the product.
Wipe your product down with a soft dry cloth
Do not use abrasive cleaners, ammoniated products, rubbing
alcohol, detergents, astringents, bleach based cleaners, aggressive
chemicals, abrasive cleaning pads, or harsh polishes on the
product