ARMTEL ACM-IP2 User manual

ACM-IP2 Analogue subsystems
module
RMLT.465275.006PP
Product Passport
Version identification: RMLT.465275.006-____
Serial number: _______________
Document version 13
26.30.11.190
2020
ENG

armtel.com
© Armtel [e-mail]

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
armtel.com page 1/16
[e-mail] © Armtel
ENG
CONTENTS
1 Product essentials and technical information........................................................................................................ 2
2 Scope of supply................................................................................................................................................................. 8
3 Operation lifetme and Manufacturer (Supplier) warranties.............................................................................. 9
4 Packing certificate...........................................................................................................................................................11
5 Acceptance certificate...................................................................................................................................................11
6 Notes for Product operation and storage.............................................................................................................12
7 Waste recovery ................................................................................................................................................................13
8 Special Notes....................................................................................................................................................................14
Appendix А(reference) Licenses and сertificates...................................................................................................15

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
page 2/16 armtel.com
© Armtel [email protected]
ENG
1 PRODUCT ESSENTIALS AND TECHNICAL INFORMATION
Product name: ACM-IP2 Analogue subsystems module
Short name of product: ACM-IP2
Product identification: RMLT.465275.006
Manufacturer: Armtel LLC
www.armtel.com
1.1 ACM-IP2 is designed for use in distributed and centralized digital Intercom and
Public Address / General Alarm communication systems (based on allotted SIP server) at
industrial and transportation facilities.
АСМ-IP2 enables to use analogue equipment and to interact with automation and alarm
units.
1.2 ACM-IP2 external appearance and overall dimensions
ACM-IP2 external appearance and overall dimensions are given at Figure 1.
ACM-IP2 is a printed board with electronic components, inserted in casing and fixed
on DIN-rail 35 mm wide.
Figure 1 shows:
−А2 – CPU-IP module;
−Х1, X2 – sockets for connection to Ethernet (including power supply by PoE plus);
Indicators on sockets X1 and X2:
1. Green – ON when there is physical connection with Ethernet network, blinking
when network interface is active (receiving or transmitting of data packages);
2. Orange – ON when the unit is powered from the PoE source;
−Х3, Х4 – sockets to connect analogue lines;
−Х8 – output socket of the integrated audio amplifier, (can be used, for example,
to listen to audio messages transmitted to terminal units);
−Х11 – socket of discrete lines (control lines), software configurable or as input
for connection, for example, direct call key of the terminal units or as output (for
load connection);
−Х19 – socket for external module ADSL-IP2 Adapter RMLT.468158.001;

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
armtel.com page 3/16
[e-mail] © Armtel
ENG
−Х21 – socket to connect external power supply source, external power is
supplied to contacts 2 «-48V» and 3 «+0V». when the module is supplied by
РоЕ plus line, voltage is output to the same contacts 2 «-48V» and 3 «+0V»;
−Х22 – negative potential on the load line, for example, the relay windings;
−Х42 – micro-SD card slot with card installed.
a) elements view
b) bottom view
Figure 1 – ACM-IP2 external appearance and overall dimensions

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
page 4/16 armtel.com
© Armtel [email protected]
ENG
ACM-IP2 variant RMLT.465275.006-01 includes ADSL-IP2 Adapter, which provides
communication with end devices by ADSL line or over a wireless data link Wi-Fi.
ADSL-IP2 Adapter external appearance and overall dimensions are given at Figure 2.
a) elements view b) side view
1 – Adapter board; 2 – Modem ADSL Module IB02 v5.0; 3 – Wi-Fi antenna NETIS PA105S;
4 –RJ-45 socket (not used); 5 – socket RJ-12 6P6C connection ADSL line;
6 – socket connect ACM-IP2 by USB.
Figure 2 – ADSL-IP2 Adapter
The ADSL-IP2 Adapter is mounted on DIN-rail similarly as ACM-IP2 and is connected
to it by the flexible cable supplied with the one. The operating mode for ADSL-IP2 Adapter
(ADSL or Wi-Fi) is set by software during configuration of ACM-IP2. Communication with the
ADSL-IP2 Adapter is executed by IP-address, while the input signal via USB-interface is
transmitted to ACM-IP2, thus providing communication with the terminal analog units.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
armtel.com page 5/16
[e-mail] © Armtel
ENG
When working on ADSL line, ADSL-IP2 Adapter supports standards IEEE802.3,
IEEE802.3u, ITU G.992.1 ... 992.5, which provide duplex communication with non-symmetrical
channel bandwidth and the frequency range from 26 kHz to 1.1 MHz with the speed of
the incoming stream is up to 24 Mbit / s, which makes it possible to use a twisted pair cable
to organize the system. The length of the communication line using ADSL can reach 5.5 km,
if the conditions specified in the ITU G.992.1 ... 992.5 standards are met.
When working on a wireless data link, Wi-Fi adapter supports IEEE 802.11a/b/g/n
protocol to operate at 2.4 GHz with a bandwidth of up to 20 MHz. The speed of data transfer
using Wi-Fi technology reaches 300 Mbit / s. The adapter uses all-directional Wi-Fi antenna
with a gain of 5dBi, which enables to place the access point at a distance of up to 100 meters
from the adapter or more - depending on the characteristics of the antenna on the access
point.
1.3 Main specifications and operational characteristics of ACM-IP2 are given in
the Table 1.
Table 1 – Main specifications and operational characteristics
Parameter Value
Main specifications of ACM-IP2
Power supply by PoE plus line (IEEE 802.3at), V
-48
Rated voltage, V
-48
External power supply voltage range, V
from -36 to -60
Maximum current consumption at nominal power supply voltage:
- for version RMLT.465275.006, mA
- for version RMLT.465275.006-01, mA
510
610
Bandwidth (-3 dB level), Hz
from 300 to 6800
Communication interface
100BaseT Ethernet*
Communication protocol
«Armtel-IP», SIP
Overall dimensions, mm
174×125×55
Weight, kg
(0,3 ± 0,02)
* Two Ethernet ports, one being stand-by, also with power supply via PoE line

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
page 6/16 armtel.com
© Armtel [email protected]
ENG
Table 1 – Main specifications and operational characteristics (continuation)
Parameter Value
Parameters of analogue lines
Number of analogue lines, pcs.
2**
Rated input signal, mV (dB)
775 (0)
Rated output signal, mV (dB)
Signal/noise ratio, min, dB
75
Internal resistance of the line, max, kOhm
1,0
Parameters of built-in amplifier
Number of channels of the built-in amplifier, pcs.
2***
Power of integrated amplifier per one channel
(at 8 Ohm load), min, W
1,0
Parameters of control lines
Number of control lines (programmable), pcs.
8
Input current, max, mA
5,0
Output current, at least, mA
35
Main specifications of ADSL-IP2 (for version RMLT.465275.006-01)
Power supply, V
3,3; 5,0
Communication interface
ADSL, ADSL2, ADSL2+
Communication protocol by ADSL line
IEEE802.3, IEEE802.3u,
ITU G.992.1…992.5
Communication interface
WI-FI 2.4
Communication protocol for Wi-Fi
IEEE 802.11a/b/g/n
Communication interface with ACM-IP2
USB 2.0
Overall dimensions with an antenna raised upright, mm
183×85×78
Weight, kg
(0,18 ± 0,01)
** One line is in operation, the second line is reserved.
*** Transmission of audio information is carried out simultaneously through 2 channels.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
armtel.com page 7/16
[e-mail] © Armtel
ENG
Table 1 – Main specifications and operational characteristics (end)
Parameter Value
Operational characteristics
Electrical protection class (under GOST IEC 61140-2012)
III
Climatic category according GOST 15150-69
NF4.1
1)
Relative air humidity at 25 °С, %
up to 80
Temperature range,
°
С
from - 5 to + 55
1) Indoor use. АСМ-IP2 is installed in communication cabinets, racks located in offices and control
rooms
1.4 ACM-IP2 has two versions. Versions of АСМ-IP2 are shown in Table 2.
Table 2 - Version identifications of АСМ-IP2
Identification ADSL-IP2 Adapter
RMLT.465275.006
Not included
RMLT.465275.006-01
Included
1.5 There is no information on the content of precious metals in the product.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
page 8/16 armtel.com
© Armtel [email protected]
ENG
2 SCOPE OF SUPPLY
The Scope of supply for ACM-IP2 is provided in Table 3.
Table 3 – Scope of supply
Identification Name
Quanti-
ty, pcs. Note
RMLT.465275.006* ACM-IP2 Analogue subsystems module 1
Product components
RMLT.468158.001
ADSL-IP2 Adapter
1
For version
RMLT.465275.006-01
Wi-Fi antenna NETIS PA105S 2,4 GHz
1
ARMT.665230.207.002
Flexible cable
1
Operational documentation
RMLT.465275.006PP
Product Passport
1
RMLT.465275.006UM
User Manual
1
* Version refer in Section 5 «Acceptance certificate». Parameter of versions see Table 2.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
armtel.com page 9/16
[e-mail] © Armtel
ENG
3 OPERATION LIFETME AND MANUFACTURER (SUPPLIER) WARRANTIES
3.1 ACM-IP2 is manufactured in accordance with the acting technical documentation
RMLT.465275.006 and is qualified for operation.
The manufacturer guarantees high performance of the equipment provided the user
complies with operating conditions given in Table 1, within the following period:
3.1.1 The warranty is effective for 12 months from the date of delivery, unless otherwise
stated in the contract.
3.1.2 The warranty period shall be extended by the length of the period during which the
product is at Armtel LLC for diagnosis, repair, replacement of the entire product or
components thereof.
3.1.3 The warranty is effective for the product (component parts) handed over by
Armtel LLC in exchange for the one received for service, unless otherwise provided for
by the contract.
3.2 Warranty exclusions:
3.2.1 The warranty for the product and its components will not be valid in the following
cases:
–the product serial number is changed, deleted, damaged or illegible;
–the product has the traces of unauthorized repair;
–the product defects are the result of negligent use or breach of transportation,
storage and mounting conditions set in the technical documentation;
–the product defects, including damage, for reasons unrelated to Armtel LLC,
such as mains voltage drops, natural phenomena or disasters, fires, etc.;
–the product defects are caused by the use of software, accessories,
consumable materials or other parts that are not approved by Armtel LLC;
–the product defects are caused by violation of the requirements for
connecting the product to other equipment stated in the technical
documentation;
–the product defects are caused by the defects of the system or its components,
in which this product was used;
–the product defects are caused by the use of operating parameters different
from those stated in the technical documentation attached to the product;

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
page 10/16 armtel.com
© Armtel [email protected]
ENG
–product defects are caused by introducing design changes without the
approval of Armtel LLC, as well as by the installation of components not
provided for in the technical documentation and user manual.
3.2.2 Cosmetic defects described during the acceptance procedure are not the reason
for refusal of warranty service. After repair the equipment shall be returned with the same
appearance.
3.2.3 The warranty does not cover faults detected by the Customer, which were claimed
after expiry of the warranty period, or any other period established by legislation for the
detection of product defects.
3.2.4 Works related to product installation/dismantling, setup, adjustment or routine
maintenance are not part of the warranty obligations of Armtel LLC.
3.2.5 The warranty does not cover product installation and setup. The organization
performing said works shall bear warranty obligations related to the quality of product
installation and setup.
3.2.6 Trips made by Armtel LLC engineers to the Customer’s place where the product is
located or is to be transported are not included in the warranty obligations of Armtel LLC and
shall be paid for by the Customer independently, unless otherwise stated in the contract.
3.3 The product operating life provided the above-mentioned conditions are observed
is at least 20 years.
3.4 Upon detection of manufacturing defects, the product and its passport shall be
returned to the manufacturer for replacement.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
armtel.com page 11/16
[e-mail] © Armtel
ENG
4 PACKING CERTIFICATE
PACKING CERTIFICATE
ACM-IP2 Analogue subsystems module RMLT.465275.006-______ ______________________
version serial number
ADSL-IP2 Adapter RMLT.468158.001 ______________________
serial number
is packed by Armtel LLC according to the requirements of acting technical documentation
Аssembly fitter
position
personal signature
printed
date, month, year
5 ACCEPTANCE CERTIFICATE
ACCEPTANCE CERTIFICATE
ACM-IP2 Analogue subsystems module RMLT.465275.006-______ ______________________
version serial number
ADSL-IP2 Adapter RMLT.468158.001 ______________________
serial number
is manufactured and accepted in accordance with technical specification and is qualified for
operation.
Quality Control Head
STAMP
personal signature
printed
date, month, year

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
page 12/16 armtel.com
© Armtel [email protected]
ENG
6 NOTES FOR PRODUCT OPERATION AND STORAGE
6.1 Operation of the product shall be in accordance with the RMLT.465275.006 User
Manual. When using the product, safety precautions laid out in “Occupational safety rules
when operating electrical installations” should be complied with when working with
electrical receivers with voltage of up to 1000 V.
Scheduled repairs of the product are not provided for. Unscheduled repair shall be
performed by the manufacturer at the request of the user. The location, time, procedure and
cost of the work shall be agreed on in advance.
6.2 Product storage conditions – in the manufacturer’s consumer package in unheated
and ventilated warehouses or storage facilities with controlled air-conditioning with a
temperature range up 5 to 40 °С.
Air in the product storage premises must be free of corrosive foreign matter (acid
fumes, alkalis).
6.3 ACM-IP2 transportation is allowed as part of a cabinet (rack), in which equipment
designed for installation in a cabinet is installed. ACM-IP2 and ADSL-IP2 Adapter (if any)
must be snapped onto a DIN-rail.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
armtel.com page 13/16
[e-mail] © Armtel
ENG
7 WASTE RECOVERY
The product is not subjected to utilization combined with domestic waste and must be
delivered to a special center for utilization of electronic products. The operating organization
must take full responsibility for the product utilization.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
page 14/16 armtel.com
© Armtel [email protected]
ENG
8 SPECIAL NOTES

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
armtel.com page 15/16
[e-mail] © Armtel
ENG
APPENDIX А
(REFERENCE)
LICENSES AND СERTIFICATES

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Product Passport
page 16/16 armtel.com
© Armtel [email protected]
ENG

armtel.com
[e-mail] © Armtel

ARMTEL LLC
Tel./fax: [phone]
www.armtel.com | [email protected]
Legal and physical address: Russia, 192012, Saint Petersburg,
Zaporozhskaya str., 12 building 1, office 1/2
TECHNICAL SUPPORT
8-800-500-90-17 (for calls from Russian Federation)
[phone] (for international calls)
[email protected]
MORE INFORMATION ABOUT PRODUCT ON OFFICIAL SITE