Armytek Predator PRO User manual

Specifications
Initial Service
Armytek Predator PRO
QUICK GUIDE
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
www.armytek.com
Model
Predator PRO
Predator PRO Warm
LED
Cree XP-G2
Cree XP-G2 (Warm)
Brightness stabilization type
FULL stabilization (constant brightness)
Light output, LED lumen
670
640
Hotspot / Spill
5 / 40 degrees
5 / 40 degrees
Beam distance
437 yard / 400 meters
383 yard / 350 meters
Hotspot diameter at 330 feet
/100 meters
26 feet / 8 meters
26 feet / 8 meters
Modes and Runtimes (measured for
Panasonic 18650 Li-Ion NCR 3100mAh
battery to the decrease to 10% of initial
brightness)
670 lm / 1 h 20 min
200 lm / 7 h
70 lm / 20 h
6 lm / 155 h
640 lm / 1 h 20 min
190 lm / 7 h
67 lm / 20 h
6 lm / 155 h
Recommended power source
1x18650 Li-Ion / 2xR123A Li-Ion / 2xCR123A
Size
Length 6.1"/155mm, head diameter 1.56"/39.5mm, body diameter 1"/25.4mm
Weight (without batteries)
5.82 oz /165 g
Armytek Optoloelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed
especially for your needs applying in them components made in USA and Japan. 10 years no-hassle warranty.
 Impressive brightness 670 lumen and maximal throw up to 400 meters
 Guaranteed durability — stands up the recoil of any gun gauge and falling from 30m height
 Constant light brightness even with almost discharged batteries and at -25°C
 Compatibility with original accessories for hunting: filters, mounts and remote switches
 Fully programmable settings to fit completely all your needs
 Record runtimes and Firefly mode for emergent situations (4 months of lightwith 1 battery)
 Special modes: Strobe for blinding the enemy, SOS and Beacon for life-saving
Items included in the package:
 Flashlight
 Holster
 Lanyard
 2 spare O-rings
 Spare rubber button
 Clip
 Rubber grip (is put on flashlight)
 Rubber ring to substitute the grip
 User manual
Set description
1. The flashlight and package can inconsiderably differ from the pictures in the manual.
2. The producer reserves the right to change the package at his own discretion without modifying this
manual.
To set/replace batteries:
1. Unscrew the tailcap.
2. Place the batteries with the positive contact (+) facing the
head of the flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
Warnings
1. Always follow the instructions from this manual and recommendations on battery
usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, including old ones with new ones,
charged with discharged. Do not use different types of batteries combined as the
element with less capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a turned on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8. Be careful during the long-time flashlight operation as some parts of the body may
heat up.
9. Do not allow children to use the flashlight without your assistance.
We recommend NOT to leave power sources inside the
flashlight for a long storage period, as batteries (especially,
non-rechargeable) can leak for various reasons and damage
the inner parts of the flashlight. If you want to keep your
flashlight in a stand-by state with batteries in, use new and
quality batteries, store the flashlight in acceptable for batteries
operational temperature and revise the batteries' state at least
once a month. If you have noticed any signs of batteries' defects,
withdraw them from the flashlight and take out of operation. It is
also recommended to replace discharged batteries with new
ones before the storage as the chance of leakage is higher with
discharged batteries.
Armytek Optoelectronics Inc., Canada shall not be liable for any harm done to the user if it was caused by
improper use of the product.
Warnings
Born to exceed.
The most technically advanced flashlights in the world.
The most technically advanced flashlights in the world.
Born to exceed.
x2
or
CR123 CR123
18650

Operation
Care and Storage
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
www.armytek.com
Specifications are subject to change without notice.
Armytek Predator PRO flashlight can be turned on in two ways: persistent and tactical. Full pressing of the button to
the click provides the persistent turning on. The flashlight will deliver light till you turn it off with second full pressing.
Tactical turning on is performed by holding the button half pressed. The flashlight will provide light till the button is
released.
Armytek Predator PRO has two mode lines. First Line is accessible when the head of the flashlight is tightly screwed to
the body (it touches the contact ring). To switch to the Second Line, loosen the head on 1/8 of a circle and wait for 1-2
seconds. To switch to the First Line again tighten the head and wait for 1-2 seconds.
The modes in each mode line are switched cyclically in the order they are set in the flashlight memory. To switch
modes in the First Line quickly (within 1 second) turn the body of the flashlight on 1/8 of a circle counter-clockwise,
and then turn the body clockwise to the maximum.
To switch modes in the Second Line quickly (within 1 second) turn the body of the flashlight on 1/8 of a circle
clockwise to the maximum, and then bring it to the initial position.
On default the following modes are available:
 in the First Line: 670 lm, 6 lm, 200 lm
 in the Second Line: Strobe (15 Hz), Firefly 1.5 lm
It is recommended to clean the threads and O-ring off dirt and old grease. Remember that secure protection from
water and dust cannot be provided by worn out sealing and fouling as well as lack of lubricant cause fast wear-out of
threads and sealing rings.
To clean the thread do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things
as it can damage the ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn
out or damaged replace it by a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow applied liquid to get inside the
flashlight or tailcap as it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.
The application of automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and application in dusty environments it is recommended to perform cleaning and
lubricating of the parts as often as required, even if it is more than twice a year.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email: [email protected]
Address: 67 Vandervoort Dr, Richmond Hill, Ontario, L4E 0C7, Canada
Armytek provides free warranty repair for 10 years from the purchase.
Warranty doesn't cover damage caused by:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Longtime application in chlorinated or polluted water, or other liquids (other than water).
4. High temperatures and chemicals' exposure, including the liquid from defected batteries.
5. Usage of low-quality batteries.
In case the rubber button is damaged, it should be replaced.
Replacement order:
1. Unscrew the tailcap.
2. Unscrew the thread ring gage, which holds the rubber button in the cap. To do
so you should use needle-nose pliers (round-nose pliers or another tool: most
suitable will be expansion pliers). Use the tool as it is shown at the picture.
Do not disassemble the flashlight except for unscrewing the thread ring gage
and replacing the rubber button. There are no other parts in the flashlight that
can be replaced by the user.
Service and Warranty
Armytek Predator PRO
QUICK GUIDE
Born to exceed.
The most technically advanced flashlights in the world.
The most technically advanced flashlights in the world.
Born to exceed.
on off
tactical
off on
persistent
1st
Line
2nd
Line
1/8 turn
1/8 turn
1.
2.
1st
Line
500 lm
5 lm
100 lm
1/8 turn
1.
2.
2nd
Line
1.5 lm (firefly)
strobe
2. 1.