Arthur holm Dynamicx2 ah22dx216ga User manual

User Guide

HDCP compliant retractable monitors for furniture integration

DYNAMICX2

TABLE OF CONTENTS

SYSTEM DESCRIPTION 8

MONITOR CONTROLS 17

OSD MENU 19

MICROPHONE CONTROLS 22

RETRACTABLE HDMI CONTROL CABLE 24

COVER CONTROLS 25

ISD MENU 26

CONNECTORS 32

MICROPHONE HANDLING 34

REMOVING THE MICROPHONE 35

CAMERA 36

AHnet PROTOCOL 37

VIDEO SIGNALS 44

AHLINK 45

TILT CONTROL 48

HDSDI CAMERA CONFIGURATION 51

HDSDI CAMERA SPECIFICATIONS 55

WELCOME

Thank you for purchasing an ARTHUR HOLM product.

Please, read these installation and operating instructions carefully and

keep them in a safe place for future consultations

We remain at your entire disposal if you have any suggestions.

Henrik Holm

General Manager

[email protected]

ABOUT US

The Company

Arthur Holm has its origins in the Danish furniture designer Jorgen Alex

Jensen, who was active during the sixties and the seventies. His design

inspiration and his concept of ergonomics have been continued by his

family, who is the design force behind Arthur Holm product range. The

result of combining Scandinavian design tradition with Mediterranean

creativity, exibility and emotion is a wide product range built on more

than 25 years of craftsmanship.

Arthur Holm offers a professional product range where tomorrow’s

technology is shaped into valued materials with design exibility and

customisation, specially created to enhance communication in reception,

collaboration, conference and meeting areas.

The art of customisation

Arthur Holm offers a range of ingenious products whose designs are based

on quality materials and the latest technology. Products which endow

meeting and conference rooms with silent, ergonomic, innovative and

aesthetic solutions that integrate into the furniture, hang from the walls as

works of art or are used as interactive points of information.

The world of Arthur Holm

Arthur Holm offers a selection of unique, elegant, versatile, exible and

ergonomic products that are being used in meeting and conference

rooms, reception areas, huddle rooms, control rooms, auditoriums and

public zones of leading companies throughout the world.

The numbers speak for themselves! We currently own 33 product patents,

have presence in over 45 countries with products and solutions inmore

than 25,000 installations.

It will be our pleasure to work with you, designing your unique and

personalised environment. Our broadcast electronic engineers will

provide the latest technology while our design team will offer you the most

exclusive appearance.

Our team puts its heart, passion and pride in all our designs.

SAFETY INSTRUCTIONS

Plugs

• Do not dismantle any part of the monitor power connector.

• Disconnect the power plug from the AC outlet when the monitor is not

going to be used for an indenite period of time.

Power and extensions cords

• Use the appropriate power cord with the correct plug type.

• Do not overload wall outlets or power cords.

• Make sure the total ampere passed through a extension cord does not

exceed the maximum allowed by the cable used.

• Do not place anything on the power cord.

• Do not locate this product where a person may walk or trip over the

cord.

• The power connector must be easily accessible

REGULATIONS AND SECURITY

ATTENTION: Do not disassemble or modify the device in any way.

This symbol warns of the presence of dangerous un-insulated

voltages inside some of the components, of sufcient magnitude

to expose people to risk of electronic shock.

This symbol draws attention to important use and maintenance

instructions in the manual that accompanies the unit.

This symbol indicates that the equipment conforms to the norms

established by the European Community.

This symbol indicates D.C. current.

Wiring connected to hazardous voltage requires installation by

qualied personnel or the use of ready-made exible cables.

For your security, your equipment must be connected to an elec-

trical outlet with grounding connection protection.

Since the plug is used to disconnect the device, the operating

electrical outlet must be in an easily accessible place.

Environment

• Install the equipment on an elevated, at surface.

• Install the equipment in a ventilated area.

• Avoid exposing the equipment to:

∙Rain or water

∙Excessive heat, cold or humidity

∙Area exposed to direct sunlight

∙Dirty areas

∙Equipment generating strong magnetic elds

• Avoid placing open containers of liquid, near the equipment.

• Keep a minimum distance of 30 mm in order to have good ventilation.

• Never place above the device any sources of ames such as lighted

candles, etc.

• If you are using the device in extreme weather conditions and/or

tropical climates, the equipment should be installed in a room which

ensures a reasonable level of temperature and humidity.

• To prevent damage, the equipment must be rmly anchored to the

surface, as shown in the installation instructions.

SAFETY INSTRUCTIONS

SYSTEM DESCRIPTION

Arthur Holm’s DynamicX2 is a motorized retractable product rangre that

provides silent, reliable and harmonic movements using a patented

solution with one only engine. It is equipped with a variable speed

mechanism to raise, lower and tilt 20º to ensure the best ergonomics,

viewing angle and visibilitiy to the room. DynamicX2 have slightly

cruved edges for a contemporary and longstanding look and the

screen is protected with an anti-reective 2-side coating 3 mm. blacj

edged glass.

The stainless steel cover plate can be customised with different

connectors, retractable cable and xed or monitorised microphones.

An Interactive Setup Display allows the control, setup and diagnose

of the monitors. Monitors provide RS-422 I/O for the remote control of

movement, speed, safety settings, brightness, contrast and backlight.

They are also equipped with AH-AMMC. The use of the Arthur Holm’s

ERT will enable the address conguration of all the monitors installed

by simply pressing a button. The AHlink Android and IOS app shows

the monitor’s serial number and can also give access to the setup and

control menus.

The UnderCover option is designed to cover conference systems and

different connectors and engineered to be cleverly integrated into

meeting and conference room furniture. The patented cover slides

comfortably downwards (into the table) and has been designed to be

veneered, providing a uniform nish with the furniture.

DynamicTalk is an elegant retractable system for gooseneck

microphones with exclusive features. It not only makes the microphone

disappear within the desk surface but it also provides a pleasant light

to indicate its status. Due to its protective patented lighting ring, the

microphones can be safely stored, protected, making meeting and

conference spaces more exible and versatile.

DynamicTalk provides two different working modes: PA and Conference.

When in PA mode, a push button placed on the stainless steel cover plate

activates or de-activates the microphone and the LED ring will indicate

the status by changing colour from red to green. This microphone

lifting system automatically silences the microphone when retracting

whereas in conference mode the microphone remains active and can

be controlled via GPI and GPO.

SYSTEM DESCRIPTION

Highlights

• Patented single engine mechanism for up/down and tilt movements

• Milled alumium housing with a contemporary design

• Front double sided anti-reecting 2 sides coating 3 mm black edged

glass

• AH-AMMC Auto mechanical movement calibration

• Wireless connectivity for setup and control

• Automatic 20° tilt angle

Options

• Built in DynamicTalk

• UnderCover

• Touch screen

• Built-in camera

• Retractable HDMI cable

• Connectors

SYSTEM DESCRIPTION

Available Models

DESCRIPTION

HDCP compliant vertically retractable aluminium 15.6" Full HD monitor with 20

degrees of automatic inclination. Single engine patented mechanism. Solid

aluminium monitor in natural anodisation nish featuring 3 mm. double sided

anti reective black edged glass. Up-table cover plate made of brushed

stainless steel with 2 push buttons. DVI-I and DVI-D inputs. Interactive Setup

Display allowing the control, setup and diagnose of the monitors. Monitors

provide RS-422 I/O allowing the remote control of movements, speeds, safety

settings, brightness, contrast and backlight. The monitors are equipped with

AH-AMMC: an auto mechanical movement calibration system. AHlink.

HDCP compliant vertically retractable aluminium 17.3" Full HD monitor with 20