ARTHUR HOLM Dynamic2 AH12D216A User manual

User Guide
Danish craftmanship
Mediterranean soul
Technology Serving Design
Dynamic2
HDCP compliant retractable monitors for furniture integration

TABLE OF CONTENTS
REGULATIONS AND SECURITY 5
SAFETY INSTRUCTIONS 5
SYSTEM DESCRIPTION 7
PACKING INSTRUCTIONS 13
CONTROLS 14
OSD MENU 16
ISD MENU 19
INPUT CONNECTORS 25
AHnet PROTOCOL 26
VIDEO SIGNALS 30
AHLink 31
INFORMATION ON DISPOSAL 34
WARRANTY TERMS AND CONDITIONS 35

WELCOME
Thank you very much for purchasing an Arthur Holm product.
Please, read these installation and operating instructions carefully and
keep them in a safe place for future consultations.
We remain at your entire disposal if you have any suggestions.
Henrik Holm
General Manager
[email protected]

ABOUT US
The Company
Arthur Holm has its origins in the Danish furniture designer Jorgen Alex
Jensen, who was active during the sixties and the seventies. His design
inspiration and his concept of ergonomics have been continued by his
family, who is the design force behind Arthur Holm product range. The
result of combining Scandinavian design tradition with Mediterranean
creativity, exibility and emotion is a wide product range built on more
than 25 years of craftsmanship.
Arthur Holm offers a professional product range where tomorrow’s
technology is shaped into valued materials with design exibility and
customisation, specially created to enhance communication in reception,
collaboration, conference and meeting areas.
The art of customisation
Arthur Holm offers a range of ingenious products whose designs are based
on quality materials and the latest technology. Products which endow
meeting and conference rooms with silent, ergonomic, innovative and
aesthetic solutions that integrate into the furniture, hang from the walls as
works of art or are used as interactive points of information.
The world of Arthur Holm
Arthur Holm offers a selection of unique, elegant, versatile, exible and
ergonomic products that are being used in meeting and conference
rooms, reception areas, huddle rooms, control rooms, auditoriums and
public zones of leading companies throughout the world.
The numbers speak for themselves! We currently own 33 product patents,
have presence in over 45 countries with products and solutions inmore
than 25,000 installations.
It will be our pleasure to work with you, designing your unique and
personalised environment. Our broadcast electronic engineers will
provide the latest technology while our design team will offer you the most
exclusive appearance.
Our team puts its heart, passion and pride in all our designs.

5
SAFETY INSTRUCTIONS
Plugs
• Do not dismantle any part of the monitor power connector.
• Disconnect the power plug from the AC outlet when the monitor is not
going to be used for an indenite period of time.
Power and extensions cords
• Use the appropriate power cord with the correct plug type.
• Do not overload wall outlets or power cords.
• Make sure the total ampere passed through an extension cord does not
exceed the maximum allowed by the cable used.
• Do not place anything on the power cord.
• Do not locate this product where a person may walk or trip over the
cord.
REGULATIONS AND SECURITY
ATTENTION: Do not disassemble or modify the device in any way.
This symbol warns of the presence of dangerous un-insulated
voltages inside some of the components, of sufcient magnitude
to expose people to risk of electronic shock.
This symbol draws attention to important use and maintenance
instructions in the manual that accompanies the unit.
This symbol indicates that the equipment conforms to the norms
established by the European Community.
This symbol indicates D.C. current.

6
Wiring connected to hazardous voltage requires installation by
qualied personnel or the use of ready-made exible cables.
For your security, your equipment must be connected to an
electrical outlet with grounding connection protection.
Since the plug is used to disconnect the device, the operating
electrical outlet must be in an easily accessible place.
Environment
• Install the equipment on an elevated, at surface.
• Install the equipment in a ventilated area.
• Avoid exposing the equipment to:
∙Rain or water
∙Excessive heat, cold or humidity
∙Area exposed to direct sunlight
∙Dirty areas
∙Equipment generating strong magnetic elds
• Avoid placing open containers of liquid, near the equipment.
• Keep a minimum distance of 30 mm in order to have good ventilation.
• Never place above the device any sources of ames such as lighted
candles, etc.
• If you are using the device in extreme weather conditions and/or
tropical climates, the equipment should be installed in a room which
ensures a reasonable level of temperature and humidity.
• To prevent damage the equipment must be rmly anchored to the
surface, as shown on the installation instructions.
SAFETY INSTRUCTIONS

7
SYSTEM DESCRIPTION
General
Dynamic2 monitors offer a timeless, classic and discreet design with
squared edges. Elegant monitors built from a solid anodised aluminium
block and have an extremely swift yet silent lift system. They have a
vertical motorised movement with an automatic 20° tilting movement
to ensure the best ergonomics, visibility and viewing angle.
This automatic tilt system provides a fast, silent and robust response,
offering a highly reliable and maintenance-free solution.
The stainless steel cover plate allows the customisation to add different
connectors, retractable cable and xed or monitorised microphones as
well as other features.
Highlights
• Single engine for up/down and tilt movements
• Milled alumium housing, squared edges
• Energy saving design, low consuption video controller
• Serial control and remote diagnosis
• AH-AMMC Auto mechanical movement calibration
• Wireless connectivity for setup and control
• Interactive Setup Display
• 2 DVI I/HDCP compliant
• Automatic 20° tilt angle
• Individual monitor addressing

8
SYSTEM DESCRIPTION
Available Models
MODEL DESCRIPTION
AH12D216A
HDCP compliant vertically retractable aluminium 12,1"
1280x800 native resolution monitor with 20 degrees
of automatic inclination. Single engine patented
mechanism. Solid aluminium monitor in natural
anodisation .Up-table cover plate made of brushed
stainless steel with 2 push buttons. DVI-I and DVI-D inputs.
Interactive Setup Display allowing the control, setup and
diagnose of the monitors. Monitors provide RS-422 I/O
allowing the remote control of movements, speeds,
safety settings, brightness, contrast and backlight.
The monitors are equipped with AH-AMMC: an auto
mechanical movement calibration system.
AH15D2HDA
HDCP compliant vertically retractable aluminium 15,6"
Full HD monitor with 20 degrees of automatic inclination.
Single engine patented mechanism. Solid aluminium
monitor in natural anodisation. Uptable cover plate
made of brushed stainless steel with 2 push buttons. DVI-I
and DVI-D inputs. Interactive Setup Display allowing the
control, setup and diagnose of the monitors. Monitors
provide RS-422 I/O allowing the remote control of
movements, speeds, safety settings, brightness, contrast
and backlight. The monitors are equipped with AH-
AMMC: an auto mechanical movement calibration
system.
AH17D2HDA
HDCP compliant vertically retractable aluminium 17,3"
Full HD monitor with 20 degrees of automatic inclination.
Single engine patented mechanism. Solid aluminium
monitor in natural anodisation. Up-table cover plate
made of brushed stainless steel with 2 push buttons. DVI-I
and DVI-D inputs. Interactive Setup Display allowing the
control, setup and diagnose of the monitors. Monitors
provide RS-422 I/O allowing the remote control of
movements, speeds, safety settings, brightness, contrast
and backlight. The monitors are equipped with AH-
AMMC: an auto mechanical movement calibration
system.

9
SYSTEM DESCRIPTION
Available Models
MODEL DESCRIPTION
AH19D2HDA
HDCP compliant vertically retractable aluminium 18,5"
Full HD monitor with 20 degrees of automatic inclination.
Single engine patented mechanism. Solid aluminium
monitor in natural anodisation. Up-table cover plate
made of brushed stainless steel with 2 push buttons. DVI-I
and DVI-D inputs. Interactive Setup Display allowing the
control, setup and diagnose of the monitors. Monitors
provide RS-422 I/O allowing the remote control of
movements, speeds, safety settings, brightness, contrast
and backlight. The monitors are equipped with AH-
AMMC: an auto mechanical movement calibration
system.
AH22D216A
HDCP compliant vertically retractable aluminium 21,5"
Full HD monitor with 20 degrees of automatic inclination.
Single engine patented mechanism. Solid aluminium
monitor in natural anodisation. Uptable cover plate
made of brushed stainless steel with 2 push buttons. DVI-I
and DVI-D inputs. Interactive Setup Display allowing the
control, setup and diagnose of the monitors. Monitors
provide RS-422 I/O allowing the remote control of
movements, speeds, safety settings, brightness, contrast
and backlight. The monitors are equipped with AH-
AMMC: an auto mechanical movement calibration
system.

10
SYSTEM DESCRIPTION
Options
AH12D216A AH15D2HDA AH17D2HDA AH19D2HDA AH22D216A
CL (Min.5 units)
Laser engraved
logo
CL (Min.5 units)
Laser engraved logo
CL (Min.5 units)
Laser engraved
logo
CL (Min.5 units)
Laser engraved
logo
CL (Min.5 units)
Laser engraved
logo
UCS (Min.10 units)
UnderCover
Stainless steel
UCS (Min.10 units)
UnderCover
Stainless steel
UCS (Min.10 units)
UnderCover
Stainless steel
UCS (Min.10 units)
UnderCover
Stainless steel
UCS (Min.10 units)
UnderCover
Stainless steel
UCV (Min.10 units)
UnderCover for
veneer
UCV (Min.10 units)
UnderCover for
veneer
UCV (Min.10 units)
UnderCover for
veneer
UCV (Min.10 units)
UnderCover for
veneer
UCV (Min.10 units)
UnderCover for
veneer
TSV (Min.10 units)
Touch sensor for
UnderCover
TSV (Min.10 units)
Touch sensor for
UnderCover
TSV (Min.10 units)
Touch sensor for
UnderCover
TSV (Min.10 units)
Touch sensor for
UnderCover
TSV (Min.10 units)
Touch sensor for
UnderCover
AHTECB2 (Min.10
units)
GPI remote control
interface
AHTECB2 (Min.10
units)
GPI remote control
interface
AHTECB2 (Min.10
units)
GPI remote control
interface
AHTECB2 (Min.10
units)
GPI remote control
interface
AHTECB2 (Min.10
units)
GPI remote control
interface
UI
Underneath
installation
UI
Underneath
installation
UI
Underneath
installation
UI
Underneath
installation
UI
Underneath
installation
MC
Matte cover plate
MC
Matte cover plate
MC
Matte cover plate
MC
Matte cover plate
MC
Matte cover plate
TS12016
Projected
capacitive
multitouch screen
TS15HD
Projected
capacitive
multitouch screen
TS170HD
Projected
capacitive
multitouch screen
TS190HD
Projected
capacitive
multitouch screen
TS22010
Projected
capacitive
multitouch screen
DTalk (Min.10 units)
Built in
DynamicTalkM
DTalk (Min.10 units)
Built in
DynamicTalkM
DTalk (Min.10 units)
Built in
DynamicTalkM
DTalk (Min.10 units)
Built in
DynamicTalkM
DTalk (Min.10 units)
Built in
DynamicTalkM
EMM (Min.10 units)
For 1 syncro mic
(XLR 3 Pin)
EMM (Min.10 units)
For 1 syncro mic (XLR
3 Pin)
EMM (Min.10 units)
For 1 syncro mic
(XLR 3 Pin)
EMM (Min.10 units)
For 1 syncro mic
(XLR 3 Pin)
EMM (Min.10 units)
For 1 syncro mic
(XLR 3 Pin)
2EMM (Min.10 units)
For 2 syncro mics
(XLR 3 Pin)
2EMM (Min.10 units)
For 2 syncro mics
(XLR 3 Pin)
2EMM (Min.10 units)
For 2 syncro mics
(XLR 3 Pin)
2EMM (Min.10 units)
For 2 syncro mics
(XLR 3 Pin)
2EMM (Min.10 units)
For 2 syncro mics
(XLR 3 Pin)
CCUSBC
USB passthrough
CCUSBC
USB passthrough
CCUSBC
USB passthrough
CCUSBC
USB passthrough
CCUSBC
USB passthrough
CC2USBC
2 USB passthroughs
CC2USBC
2 USB passthroughs
CC2USBC
2 USB passthroughs
CC2USBC
2 USB passthroughs
CC2USBC
2 USB passthroughs
CCUSBPower
USB power
CCUSBPower
USB power
CCUSBPower
USB power
CCUSBPower
USB power
CCUSBPower
USB power
FB
Free button (GPO)
passthrough
FB
Free button (GPO)
passthrough
FB
Free button (GPO)
passthrough
FB
Free button (GPO)
passthrough
FB
Free button (GPO)
passthrough
PO
AC Power outlet
PO
AC Power outlet
PO
AC Power outlet
PO
AC Power outlet
PO
AC Power outlet
AJ
Audio mini-jack
AJ
Audio mini-jack
AJ
Audio mini-jack
AJ
Audio mini-jack
AJ
Audio mini-jack