Article KROSSA User manual

Assembly Instructions
KROSSA
70" Shelf
VERSION 1.0

KROSSA 70" Shelf
ANTI-TIP KIT INVENTORY
ID DESCRIPTION QTY
BRACKET 2
M4 ×20MM SCREW 2
M8 ×51MM PLUG 2
M6 ×70MM SCREW 2
Page 2 of 4
30 min
3
TIME # OF PEOPLE DIFFICULTY
ANTI-TIP
Installation Required
Hardware (C/D) to attach brackets to wall is designed
for drywall. To attach this unit to another type of wall,
consult with your local hardware store.
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
WARNING!
ANTI-TIP RESTRAINT INSTALLATION
REQUIRED TOOL
8MM / 5/16" DRILL BIT
REQUIRED TOOL

Page 3 of 4
1
KROSSA 70" Shelf
Place unit in desired location and mark
on wall where hole should be drilled.
×2
First attach the brackets into the unit as
shown in illustration below. Install bracket
to the pre-drilled holes on top.
!

Page 4 of 4
2
Drill hole into drywall, insert plug
(C), and attach unit to wall.
!
KROSSA 70" Shelf
×2