Article LAUD User manual

Assembly Instructions
LAUD
Floor Mirror
VERSION 1.0

Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
2
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
PLUG 4
M4 ×25MM SCREW 4
BRACKET 2
QUICK LINK CABLE 2
ANTI-TIP RESTRAINT INSTALLATION
Page 2 of 4
MIRROR Anti-Tip Installation
WARNING!
Hardware (A/C) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2

#
#
Page 3 of 4LAUD Floor Mirror
Quick link cable (D)
through pre-installed
brackets (C) onto mirror.
Thread through brackets
(C) on the wall. To lock, link
cable until they snap lock.
!
1
2
× 4
Drill holes in wall using
8mm / 5/16"drill bit.
Back mirror
!

#
Page 4 of 4LAUD Floor Mirror
3