Article SERA User manual

Assembly Instructions
SERA
Headboard
VERSION 1.0
WW - 1055 - H - 130

SERA Headboard Page 2 of 3
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
30 min
3
TIME # OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
CLEAT 1
45MM SCREW 4
Screws (B) to attach cleat (A) to wall are designed
for wood studs. To attach this headboard to another
type of wall, consult with your local hardware store.
1
Locate wood wall studs and mark on wall
where cleat (A) should be mounted.
Use a level to ensure that the cleat is level
with the floor. Drill holes into wood wall studs.
Headboard should be
resting on the floor.
!
REQUIRED TOOLS

Page 3 of 3SERA Headboard
2
3
× 4
WOOD
WALL
STUD