Article KOUVA User manual

Assembly Instructions
KOUVA
Headboard
VERSION 1.0

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
Page 2 of 7
KOUVA Headboard
PARTS INVENTORY
ID DESCRIPTION QTY
LEFT SIDE HEADBOARD 1
RIGHT SIDE HEADBOARD 1
ALLEN KEY 1
M6 ×60MM BOLT 5
15 min
1
TIME
# OF PEOPLE
DIFFICULTY
ANTI-TIP
Installation Required

Page 3 of 7
1
KOUVA Headboard
× 5

ANTI-TIP KIT INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 ×20MM SCREW 4
M8 ×51MM PLUG 4
M6 ×70MM SCREW 4
STRAP 2
Page 4 of 7
KOUVA Headboard
WARNING!
ANTI-TIP RESTRAINT INSTALLATION
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
REQUIRED TOOL
8MM / 5/16" DRILL BIT
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.

Page 5 of 7
KOUVA Headboard
1
2
Attach bracket to each inside edge approx. 1.5" in through the holes on the
back of the headboard. Note there are no existing pilot holes on the product.
Mark on wall where second pair
of brackets should be placed.
× 4
× 2