Article SABA User manual

Assembly Instructions
SABA
Bed
VERSION 1.0

Page 2 of 9
SABA Bed
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
PARTS INVENTORY
ID DESCRIPTION QTY
HEADBOARD 1
HEADBOARD REMOVABLE COVER 1
FOOTBOARD 1
SIDE RAIL 2
CENTER RAIL 1
CENTER SUPPORT LEG 1
SLATS 4
FOOTBOARD AND SIDE RAIL
REMOVABLE COVER 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
ALLEN KEY 1
M8 ×30MM BOLT 24
M8 ×70MM BOLT 1
1 hour
5
TIME
# OF PEOPLE
DIFFICULTY
REQUIRED ASSEMBLY SPACE
Floor area required is 2.5m x 2.5m.
Ceiling height is 2.5m.

#
Page 3 of 9
SABA Bed

#
Page 4 of 9
SABA Bed
1
× 4
Attach left side rail and
right side rail to headboard. Do not fully tighten bolts.

#
Page 5 of 9
SABA Bed
2
Attach left side rail and
right side rail to footboard. Do not fully tighten bolts.
× 4

#
Page 6 of 9
SABA Bed
3

#
Page 7 of 9
SABA Bed
4
Fully tighten all bolts.
Adjust levelers as needed.

#
Page 8 of 9
SABA Bed
5
Velcro line at footboard
and side rail.
Roll the cover at side rail and hook to
the velcro along footboard and side rail.
Do not over pulling the cover,
stick the cover evenly to the
end of side rail.
!

#
Page 9 of 9
SABA Bed
× 16
7