Article LIGNUM User manual

Assembly Instructions
LIGNUM
Shelving Unit
VERSION 1.1

LIGNUM Shelving Unit
PARTS INVENTORY
ID DESCRIPTION QTY
TOP SHELF 1
SECOND SHELF 1
THIRD SHELF 1
FOURTH SHELF WITH DRAWER 1
BOTTOM SHELF 1
BOTTOM SHELF SUPPORT 1
RIGHT FRAME 1
LEFT FRAME 1
ANTITIP WALL BRACKET 1
HARDWARE / TOOLS INVENTORY
ID DESCRIPTION QTY
ALLEN KEY 1
M6 ×30MM BOLT 20
WOOD DOWEL 14
M4 ×25MM SCREW 4
M4 ×50MM SCREW 4
Page 2 of 9
30 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
ANTI-TIP
Installation Required

Page 3 of 9
ASSEMBLED UNIT
Numbered labels are
placed on the front
facing side of each part.
!
LIGNUM Shelving Unit

Page 4 of 9
Insert 2 wood dowels (C) on
fourth shelf with drawer (4).
!
LIGNUM Shelving Unit
1A
1B
×2
×8
100%
85%
50%
100%
85%
50%

Page 5 of 9
LIGNUM Shelving Unit
2

Page 6 of 9
LIGNUM Shelving Unit
3 wood dowels (C)
2 wood dowels (C)
!
!
3
3A
3B
×2
×8
100%
85%
50%

Page 7 of 9
LIGNUM Shelving Unit
4
!
×4
5
Ensure that all shelves are
level before fully tighening
all bolts on both side frames.
!
100%
85%50%
×20

Page 8 of 9
LIGNUM Shelving Unit
1
Place unit in desired location and mark on
wall where wall bracket (9) should be placed.
!
REQUIRED TOOLS
15 min
2
TIME # OF PEOPLE DIFFICULTY
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
WARNING!
ANTI-TIP RESTRAINT INSTALLATION

Page 9 of 9
LIGNUM Shelving Unit
2
3
Drill holes into wall stud and
attach bracket (9) to wall.
!
Fit bracket on shelf onto wall bracket
and ensure shelving unit is secure.
×4
×4
These screws are for wall studs only. Consult
with a hardware store about proper mounting
hardware for other materials such as drywall.