Artway Tech KDL100 User manual

1
PET GPS TRACKER
COLLAR
KDL100
USER MANUAL

2
PREFACE
Thank you for purchasing the GPS tracker. This manual shows how to operate the device smoothly and
correctly. Make sure to read this manual carefully before using this product. Please note that specification
and information are subject to changes without prior notice in this manual. Any change will be integrated in
the latest release. The manufacturer assumes not to be responsible for any errors or omissions in this
document.
1. Introduction:
KDL100 is a leather pet collar, suitable for midium and large animals, a special design hidden design
tracker. It can locate accurately, set multiple functions of security, positioning, realtime tracking. Offer you
precise positioning information and dynamic conditions. Perfect deluxel eather collar design with GPS
tracker inside of small pouch, make it not visible against thief, also weather-proof.
It working based on existing GSM/GPRS(850/900/1800/1900MHz) network and GPS satellites, locate and
monitor the pets by SMS or Computer or PDA, which can be utilized by you to position your pet, it’s a cool
tool to protect your PET and farm animals.
Special Features:
* High quality leather pet collar design
* Hidden tracker, not easy to notice
* Waterproof
* GPS SiRF-Star III chipset, Fast Signal Acquisition
* Adjustable length, suitable for different size animals
* Track by SMS with the maps link
* Realtime tracking
* 1000mAh battery, long time usage.
* Free online web server

3
Specification:
Content Specs.
Dim.
68cm (L) x 3.8cm (W), leather Thickness: 4mm
Shortest circle 40cm
Weight 150g
Network GSM/GPRS
Band 850/900/1800/1900Mhz
GPS sensitivity -159dBm
GPS accuracy 5m
Time To First Fix
Cold status 45s
Warm status 35s
Hot status 1s
Car charger 12—24V input
5V output
Wall charger 110－220V input
5V output
Battery Chargeable changeable 3.7V 1000mAh Li-ion battery
Stand by 300hours
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +55°C
Humidity 5%--95% non-condensing
LED INDICATOR STATUS MEANING
GREEN-Not lit Device fault or dormant.
GREEN-Continuously lit No GPRS signal.
GREEN-Flashing GPRS communication established.
Center-RED-Not lit Fully charged.
Center-RED-Solid red Charging.
BLUE-Not lit No power to the unit or the unit can’t start.
BLUE-Continuously lit Searching for GPS signal.
BLUE-Flashing GPS location successful.

4
2. INSTALLATION
2. 1 SIM-CARD INSTALLATION
Open the leather collar cover on the side of collar pack , the PCBA will be exploded, insert the sim card into
sim card slot , if you have purchased a MICRO SIM , you will need to use the Micro SIM adapter enclosed,
like this:
2.2 USE THE GPS DEVICE
Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.
For first use, please initialize the unit and restore it to default setting. (Please refer to 3.1 for
instruction.)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS
signals. The indicator will keep flashing every 3 seconds when the unit has received the signals.
When this unit receives GPS signals normally, you can use it and do any setting as the instructions of
this manual.
2.3 EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE
1. Google Maps link: This is the link to the Google map showing the position of the tracker unit.When
click the link, if a map is displayed, there is GPS information for the unit. If there is no may, there is no
GPS information for the tracker.
2. V:A/V: Indicates GPS signal. V:A indicates there is a GPS signal; V:V indicates there is no GPS signal.
3. 2014-07-29 06:41:43 The date and time stamp when the unit last received a GPS signal.
4. S: 007km/h: This indicates the last known speed of the unit.
5. Bat:80% The approximate amount of battery charge remaining. The value is between5%and 100%,
with 100% being fully charged.
6. 4109112546: The IMEI code of tracker device. This number is used for tracking website and the app.

5
3. SMS TRACKING
1) Call the SIM-card phone number in the device by other cell phone
2) Receive a Google Maps link by SMS to your mobile phone
3) Click on the Google Maps link
4) Now it displays the position of device.
Command Instruction
4. ONLINE TRACKING
4.1 COMMAND INSTRUCTION TO SET THE ACCES POINT NAME (APN)
INSTRUCTION COMMAND REPLY
Reboot the device begin123456 begin ok
Set authorized number admin123456+space+phone
number
admin ok
Cancel authorized number noadmin123456+space+phone
number
noadmin ok
SMS Track G123456# Google link
Set GMT time zone number timezone123456+space+ 8 time ok
Sleep by time (default mode-save
much power,tracker will fall asleep in 5
minutes)
sleep123456+space+time sleep time ok
Sleep by shock sensor(Suits for
tracking on platform)
sleep123456+space+shock Sleep shock ok
No sleep(tracker will continuou
working)
sleep123456+space+off sleep off ok
Switch to the NO GPRS mode(default
mode)
Nogprs123456 Nogprs ok
Switch to the GPRS mode(for tracking
online )
gprs123456 gprs ok
Format the device （must send by
authorized number）
format
NAME INSTRUCTION COMMAND REPLY FOR EXAMPLE
APN
Set new APN
( old one will be
replaced)
apn+123456+space+apn
content apn ok apn123456 apn
APN user Set APN username apnuser+123456+space+co
ntent apnuser ok apnuser123456 user
APN password Set APN password apnpasswd+123456+space
+content apnpasswd ok apnpasswd123456 password
Switch to the
GPRS mode
Open the GPRS gprs123456 gprs ok gprs123456
Set Upload
the frequency
Default 120 seconds Upload+123456+space+30 Upload ok Upaload123456 30

6
4.2 START ONLINE TRACKING
Note:Must turn on GPRS function (send comand “gprs123456 to the device ) and set the apn first
Platform : http://www.zg888gps.com/
IMEI No. : In the pack cover inner side
Password: 123456
5. DETAIL INSTRUCTION:
5.1 Initialization
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (Default
password: 123456)
For example, send SMS“ begin123456” to the tracker via a cell phone, If succeeded,
if will reply“begin ok”.
5.2 Change the password
5.2.1 Set Password: Send sms: “password+old password+space+new password” to the unit to change the
password.
For Example, pls send sms: “ password123456 888888” to terminal device, it will reply sms: “password OK”.
New password 888888 changed in success.
5.2.2 Be sure keep the new password in mind, you have to upload the software to restore the original
setting in case of losing the new password.
5.2.3 Make sure the new password is in 6 digits Arabic numbers, or the tracker can not recognize the
password.
5.2.4 Make sure that all the symbol“+”in sms commends is just for quick understanding, which don’t need to
enter “+” in sms, and “space” means press the spacebar button of the cell phone.
5.3 Authorization
There are only 3 cell phone numbers able to be authorized, be sure to set the authorization phone number
before use.
5.3.1 Send SMS：“ admin+password+space+cell phone number” to set up a authorized number. The other
authorized numbers should be set by the first authorized number. If the number is successfully
authorized, the unit will reply “admin ok!” in SMS.
5.3.2 Send SMS：“ noadmin+password+space+authorized number” to delete the authorized number.
5.3.3 For roaming purpose, you have to add your country code ahead of the cell phone number, for
example, please send：“ admin123456 +008613322221111” to tracker to set 13322221111 as an authorized
number.

7
5.3.5 When the authorized number call the device, it will hang up your phone and reply a real-time latitude
and longitude information, as below:
5.4 Single Locating
5.4.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is
already an authorized number, then it will not respond when an unauthorized number calls it up.
5.4.2Single message inquires the latitude and longitude information, any telephone number can send instr
uction G1234 # to the equipment, then the equipment will reply the latitude and longitude information to thi
s telephone.
Note: G is for directive, 1234 is the first four numbers of the password
5.4.3 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info as below:
*Tracking location, When GPS signals is weak, the position of latitude and longitude included in the SMS is
the position that the tracker received GPS signals at last. If it is different with its exact current location, pay
attention to check the time included in the SMS you got.
5.5 Auto Track
5.5.1 Send SMS command “t030s005n+password” to the tracker device, it will report the “no reply” at 30s
intervals for 5 times. (s:second, m:minute, h:hour). This command setting must be in 3 digits and the
maximum value is 255.
5.5.2 Unlimited times auto track: Send SMS “t030s***n+password” to the tracker device, it will reply the “no
reply” continuously at 30 seconds intervals.
5.5.3 Cancellation: Send SMS “not+password” to the tracker device, it will report the “notn ok”.
Note: the interval must not less than 20s.
5.6 Monitor (Voice Surveillance)
5.6.1 The command to switch between Track and Monitor are “tracker” and “ monitor”.
5.6.2 The default mode is “track” (Track mode).
5.6.3 Send SMS “monitor+password”, and it will reply “monitor ok!” and switch to “monitor” mode.
5.6.4 Send SMS “tracker+password”, it will reply “tracker ok!” and restore to “track” mode.

8
5.7 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to
the authorized numbers when it breaches the district.
5.7.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS:
“stockade+password+space+latitude,longitude; latitude,longitude” to unit to set the restricted district. In
case of breach, it will send SMS “stockade ok” to the authorized numbers every 3 minutes.
Remark: The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second
latitude&longitude is the coordinate of the bottom right corner.
5.7.2 Cancel: Send SMS:” nostockade+password” to deactivate this function,tracker will reply “nostockade
ok”.
5.8 Movement alert
5.8.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS:
“move+password” to the unit, then the unit will reply “move ok!”. In case of such a movement （the unit
default distance is 200M ）, it will send SMS “Move ALARM+ Latitude and longitude” to the authorized
numbers every 3 minutes.
5.8.2 Cancel: Send SMS:” nomove+password” to deactivate the movement alert, reply “nomove ok”.
5.9 Overspeed alert:
5.9.1 Set up: Send SMS: “speed+password+space+080” to the unit (suppose the speed is 80km/h), and it
will reply “speed ok!”. When the target moves exceeding 80 km/h, the unit will send SMS :”speed ALARM
+080!+ Latitude and longitude” to the authorized numbers every 3 minutes.
5.9.2 Cancel: Send SMS “nospeed+password” to deactivate the overspeed alarm, tracker will reply
“nospeed ok”.
Remark: The recommended speed should be not less than 50km/h. For below that rate, it will be effected
the accuracy by gps signals drift etc.

9
5.10 Low battery alert
When GPS device battery is going to be about 3.7V, it will send SMS: “bat:l” at 30 minutes interval.
5.11 Terminal (local) Time Setting
Send SMS “time+space+zone+password+space+local time”.
For example, Send SMS “time zone123456 8” (time zone of China).
If the local time zone is negative as “-8”, then it should set as SMS: “time zone123456 -8”.
5.12 Sleeping power-save mode
Sleep by time (ex-factory default mode-save much power)
Send "sleep+password+space+time", tracker will reply "sleep time ok" if none of the alarms has been
set and no operations, tracker will fall asleep in 5 minutes, LED will be off, calling or SMS or Pressing
switch can awake the tracker. If these alarms have been set, tracker will enter sleep by detecting
shock sensor. And tracker will sleep by time as default.
Sleep by shock sensor （recommend set this mode when driving）
Send "sleep+password+space+shock", tracker will reply "sleep shock ok", it will enter sleep mode
after detect no shock, and LED will be off.
5.13 Restore factory settings
Send SMS command “format”, the unit will reply “Restore factory Settings ok, please bind the owner again”

10
5.14 GPRS setting
User must send SMS via cell phone to set up IP, port and APN before starting GPRS.
5.14.1 Setting up APN
5.14.1.1 APN standards for Access Point Name and differs from country to country. For more information
about the local APN, inquire with your local GPRS network operator.
5.14.1.2 Text the tracker a SMS “apn+password + Space + your local APN” via a cell phone and if
succeeded in setup, the tracker will return the message “apn ok”.
5.14.1.3 e.g. send SMS command “apn123456 cmnet”. If succeeded, “apn ok” is returned by the tracker in
SMS.
Notes: 123456 refer to password of tracker and CMNET is the APN of China Mobile (One of GSM Operator
in china).
Note:
when the device has no GPS signal, or on sleeping mode,it reply 2 SMS, the rst of history record V: V,
the second of real time tracking information after get GPS signal V: A.
Make sure that all the symbol“+”in sms commends is just for quick understanding, which don’t need to
enter “+” in sms, and “space” means press the space bar button of the cell phone.
When the device location show different with map, there are two kinds of circumstances, 1.Device in sleep
condition, 2 No GPS signal;Solution: Dial SIM Card Number in the Device, if only reply one SMS with "V:V",
it means no GPS Signal; If reply one SMS, with "V:A", it means device in sleep model;
(Note: We advice use Shock Sleep Model when driving)