It is always recommended to anchor the unit to the gorund. Drill through
the four holes in each of the base of the unit using 6mm dia masonry drill
to a depth of 70mm. Screw in the anchor fixings. (These have a self
cutting thread). If not anchoring the unit, fit the self seal plugs
BEFORE BUILDING to block the fixing holes from underneath.
Please note product must be bolted down to comply with LPS1175.
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
GLADIATOR PLUS 1
ZSCREW32 x12
ZSILCOL1 x2
ZSCREW04 x4
ZSCREW100 x406
ZSCREW340 x24
32670 x22
6mm
Dia.
10mm
Spanner
18V
ZCOMPPLZS02 x12
ZCOMPPLAS22-23-24 x18
6x 2mm, 6x 3mm, 6x 5mm
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 2410mm x 3790mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
ROOF BRACE 39897 x2
For maintenance instructions of this product visit www.asgardsss.co.uk
Warning: Please keep
this key card safe! Refer
to if replacement key is
required.
x2
Warning: some panels may weigh over
20Kg Beware of manual handling
SEALANT
00001
YOUR UNIQUE
KEY CODE
FRONT BASE PNL
039841 x1
TOP COVER CHANNEL 40063 X4
FLOOR COVER CHANNEL 40062 x4
FASCIA 39848 x1
RH DOOR
32944 x1
RH FRONT PANEL 039861 x1
LH FRONT PANEL 39860 x1
LH DOOR
32943 x1
RH FRT SIDE PANEL
39815 x1
SIDE COVER CHANEL 32916 x4
LH FRT SIDE PANEL
39814 x1
RH FRT TOP PANEL
39873 x1
LH FRT TOP PNL
39871 x1
LONG TOP CAP
39893 x1
SHORT TOP CAP
39892 x1
EXTENSION TOP CAP
40095 x1
RH EXT TOP PNL
40066 x1
LH EXT TOP PNL
40065 x1
RH REAR TOP PANEL
39869 x1
LH REAR TOP
PNL 39867 x1
ROOF JOINT
STRIP 40881 x4
LH BACK PANEL
39832 x1
LH REAR SIDE PANEL
32874 x1
RH REAR SIDE PANEL
32875 x1
REAR BASE PNL
39831 x1
RH BACK PANEL
39833 x1
TOP FRONT BACK CHANNEL
40094 x3
LH EXT SIDE PANEL
32853 x1
RH EXT SIDE PANEL
32854 x1
EXT BASE PANEL
40064 x1
Posi-Driv
Screwdriver
