Askia Kameleon K7 Glass User manual

Kameleon Glass
K7
ACOUSTIC PODS
ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS
Info.
Powerrill needed.
Allen key needed.
Allen key and screws needed.
T-Handle hex key needed.
T-Handle hex key and screws needed.
Unlocked.
Lock.
Level check.
Steps.
Bag with screws.
Screwdriver needed.
Main Inthernet supply.
Main Power supply.
Ventilation coupling.
Power coupling.
Ethernet coupling.
Lighting coupling.
Motion sensor coupling.
Magnetic coupling element.
Whiteboard.
Pinboard.
VESA Adapter.
Pay attention to.
Pay attention not
to break the glass.
Ok.
Stop.
Do.
Don’t.
Pay attention to.
Move in place.
Position the door on pins.

Included
Assembly in 225 min. with 3 people
x1 T-Handle Hex Key 4 x1 T-Handle Hex Key 5 x1 T-Handle Hex Key 7 x2 Sucction cupsx1 Ceiling Panels Adjusterx1 Allen Key 2 x1 Allen Key 3
x6 x16
x32 x2
x20

Elements
x2 Floor Coupling connections (one with ventilation cable)
x1 Center Back Glass Wall
x3 Ceiling
x2 Ceiling Coupling connections (one with cables)
x9 Acoustic Felt Ceiling Panels
x9 Carpet, x6 Dividers
x3 Floor
x1 Left & x1 Right Back Glass Walls
x2 Media adjuster
x1 Door Handle
x4 Interior Panels x2 Left & x2 Right Structure Panels
x4 Exterior Panels
x1 Left & x1 Right Front Glass Walls x1 Door Frame x1 Left Coupling connection,
x1 Left (with two sets of cables)
& x2 Right Coupling connections
x1 Left & x1 Right Glass Panels

1
T-Handle Hex Key 4

2
x16 with
T-Handle Hex Key 4

3
Bottom
Top
Connect
Bottom
Top
x8 with
T-Handle Hex Key 4

4
Top
Bottom
Top
Bottom
Inside
Outside
T-Handle Hex Key 7

5
Inside
T-Handle Hex Key 4
T-Handle Hex Key 7

6
Inside
Outside
x16 with
T-Handle Hex Key 4
T-Handle Hex Key 7

7
Bottom
Top
Bottom
Left
Top
Connect
x8 with
T-Handle Hex Key 4

8
Top
Bottom
Inside
Outside
T-Handle Hex Key 7
Bottom
Top

9
Inside
T-Handle Hex Key 4
T-Handle Hex Key 7

10
Inside
x20 with
T-Handle Hex Key 4
T-Handle Hex Key 7
Sucction cup handles

11
Inside
Recomandation
It is recomended to start with
the Center Back Glass Wall.
T-Handle Hex Key 7
Sucction cup handles
Up

12
T-Handle Hex Key 7
Sucction cup handles
Inside
Outside

1313
The door opening can be
oriented Left or Right just
by rotating the frame.
Recomandation
It is recomended to start
with the Door Frame.
Sucction cup handles

14
InteriorExterior
InteriorExterior
x6 with
T-Handle Hex Key 4
x2 with
Allen Key 3

15
Bottom
Top
Adjust the glass door
accordingly if needed.
Do not close until you
check the glass door not
to hit the door frame edge.
Pay attention not to
break the glass door.
Allen Key 3
Allen Key 2
Check if the door closes
properly and adjust the
door plates if needed.
Tighten or loosen the
plates when needed.
To adjust the glass door the height must be
calibrated. If you need to raise the glass door,
you loosen the top hinge and tighten the
bottom hinge.
If you need to lower the
glass door, you loosen
the bottom hinge and
tighten the top hinge.

16
Inside
T-Handle Hex Key 7
Sucction cup handles