ASROCK Rack EP2C612D8C User manual

EP2C612D8C
Quick Installation Guide
www.asrockrack.com
4
2
P/N: 15G065044100AK V1.0
Install the Server Board
Motherboard Layout
Jumper Cap On/O
The server board User's Manual is available for download from the ASRock Rack's ofcial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
1
1Insert the server board into the chassis.
2Aff ix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
When t he jumper cap is placed on the pins, the
jumper is “Short”. If no jumper cap is placed on the
pins, the jumper is “Open”.
The illustration shows a 3-pin jumper whose pin1
and pin2 are “Short” when a jumper cap is placed on
these 2 pins.
I/O Panel
DDR4_H (64 bit, 288-pin module, Blue)
DDR4_G (64 bit, 288-pin module, Blue)
DDR4_B (64 bit, 288-pin module, Blue)
DDR4_A (64 bit, 288-pin module, Blue)
DDR4_E (64 bit, 288-pin module, Blue)
DDR4_F (64 bit, 288-pin module, Blue)
DDR4_C (64 bit, 288-pin module, Blue)
DDR4_D (64 bit, 288-pin module, Blue)
PCIE6
(Blue)
PCIE5
(Blue)
PCIE3
(White)
EP2C612D8C
BAT1
VGA1 COM1
USB 3.0
T: USB1
B: USB2
LAN1
USB 2.0
T: USB1
B: USB2
IPMI
LAN
LAN2
UID1
ATXPWR1
1
PSU_SMB1
REAR_FAN1
ATX12V2AT X12V1
CPU2_FAN1
CPU2 CPU1
CPU1_FAN1
FRNT_FAN3
FRNT_FAN2 FRNT_FAN4
SSATA_0
SSATA_1
USB3_3
SSATA_2
SATA_1
SATA_3
SATA_5
1
USB_3_4
11
1
USB3_4_5
SPEAKER1
BIOS
64Mb
Intel
C612
MEZZ1
BMC
ROM
1
25.40 cm (10 in)
30.5cm (12 in)
23 45
6
7
8
9
10
13
14
15
16
17
18
19
20
49
48
50
51
52
1
1
SATA_SGPIO1
SSATA_SGPIO1
11
12
FRNT_FAN1
PLED PWRBTN
PANEL1
1
AUX_PANEL1
1
TPM1
BMC_SMB2
BMC_SMB1BMC_SMB3IPMB1
1
PMBUS_SEL_CLK1
111111
J100
PMBUS_SEL_DATA1ME_RECOVERY1
PMBUS_SEL_ALT1
PECI1
NMI_BTN1
CHASSIS_ID1CHASSIS_ID2CHASSIS_ID3
T 1
R
21
22
SSATA_3
SATA_0
SATA_2
SATA_4
HDLED RESET
1
1111
111
1
24 2326 2528 2730 2932 31 34 33 36 35 39 3841 4043 4245 4447 46 37
12 x 288-pin DDR4 DIMM Slots
(DDR4_G, DDR4_H, Blue)
2 ATX 12V Power Connector (ATX12V2)
3PSU SMBus (PSU_SMB1)
4 ATX Power Connector (ATXPWR1)
5 ATX 12V Power Connector (ATX12V1)
62 x 288-pin DDR4 DIMM Slots
(DDR4_A, DDR4_B, Blue)
7 LGA 2011 R3 CPU Socket 1 (CPU1)
8 CPU 1 Fan Connector (CPU1_FAN1)
9 Front Fan Connector (FRNT_FAN3)
10 2 x 288-pin DDR4 DIMM Slots
(DDR4_C, DDR4_D, Blue)
11 SSATA SGPIO Connector (SSATA_SGPIO1)
(SSATA3 0-3)
12 SATA SGPIO Connector (SATA_SGPIO1) (SATA3
0-5)
13 Front Fan Connector (FRNT_FAN4)
14 Front Fan Connector (FRNT_FAN2)
15 USB 2.0 Header (USB_3_4)
16 USB 3.0 Header (USB3_4_5)
17 SSATA3 Connector (SSATA_0)
18 SSATA3 Connector (SSATA_1)
19 Vertical Type A USB 3.0 (USB3_3)
20 SSATA3 Connector (SSATA_2)
21 Front Fan Connector (FRNT_FAN1)
22 SSATA3 Connector (SSATA_3)
23 SATA3 Connector (SATA_1)
24 SATA3 Connector (SATA_0)
25 Speaker Header (SPEAKER1)
26 SATA3 Connector (SATA_2)
27 SATA3 Connector (SATA_3)
28 SATA3 Connector (SATA_4)
29 SATA3 Connector (SATA_5)
30 System Panel Header (PANEL1)
31 Auxiliary Panel Header (AUX_PANEL1)
32 TPM Header (TPM1)
33 Chassis ID3 Jumper (CHASSIS_ID3)
34 ermal Sensor Header (TR1)
35 Chassis ID2 Jumper (CHASSIS_ID2)
36 Non Maskable Interrupt Button (NMI_BTN1)
37 Chassis ID1 Jumper (CHASSIS_ID1)
38 CPU PECI Mode Jumper (PECI1)
39 ME Recovery Jumper (ME_RECOVERY1)
40 PMBUS Mode Jumper (PMBUS_SEL_ALT1)
41 Descriptor Security Override Jumper (J100)
42 PMBUS Mode Jumper (PMBUS_SEL_CLK1)
43 PMBUS Mode Jumper (PMBUS_SEL_DATA1)
44 Intelligent Platform Management Bus header
(IPM B1)
45 BMC SMBus Header (BMC_SMB_3)
46 BMC SMBus Header (BMC_SMB_2)
47 BMC SMBus Header (BMC_SMB_1)
48 Mezzanine Card Slot (MEZZ1) (for storage card)
49 Rear Fan Connector (REAR_FAN1)
50 2 x 288-pin DDR4 DIMM Slots
(DDR4_E, DDR4_F, Blue)
51 CPU 2 Fan Connector (CPU2_FAN1)
52 LGA 2011 R3 CPU Socket 2 (CPU2)
7
6
3
2
4
15
8
No. Description No. Description
1 USB 3.0 Ports (USB3_1_2) 5 LAN RJ-45 Port (LAN2)
2 LAN RJ-45 Port (IPMI_LAN) 6 UID Switch (UID)
3 USB 2.0 Ports (USB_1_2) 7 Serial Port (COM1)
4 LAN RJ-45 Port (LAN1) 8 VGA Port (VGA1)
*15G065044100AK*
3

EP2C612D8C
Quick Installation Guide
www.asrockrack.com
8LAN Port LED Indications
PCI Express Slot Conguration
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10M bps connection or no
link
Blinking Yellow Data Activity Yellow 100M bps connection
On Link Green 1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection or
no link
Blinking Green Data Activity Yellow 100Mbps connection
On Link Green 1Gbps connection
5
7
11
6
123
Open the socket levers and the
CPU socket cover.
Install the processor and close
the socket cover.
Close the socket levers. Remove
the CPU protection cap.
Install the CPU Fan and Heatsink
CPU_FAN
12
Apply the thermal grease. Install the
CPU fan and heatsink and secure
the screws.
Connect the CPU fan to the CPU
FAN connector.
Install the Memory
Install the Power Cables
123
Unlock a DIMM slot by
pressing the module clips
outward.
Insert the memory module. Lock the clips.
10 Install the PCIE Card
1Remove the bracket facing the slot that
you intend to use. Keep the screw for
later use.
2Align t he card con nector w ith the
slot and press firmly until the card is
completely seated on the slot.
Fasten the card to the chassis with the
screw.
3
A
B
B
A
A
B
A
B
A
B
IPMI LAN Port
1G LAN Port
System Panel Header Auxiliary Panel Header
12 Headers
GND
RESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
9
Install the Processor
GND
SMB_CLK
SMB_Alert
CASEOPEN
1
SMB_DATA
+3VSB
LAN1_LINK
LED_PWR
LAN2_LINK
LED_PWR
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
System Fault LED-
AB
CD
System Fault LED+
E
1
3V 3V
GND GND
5V 5V
GND
PWROK_PS
5VSB
12V 12V
3V
3V -12V GND PSON# GND GND GND 5V 5V 5V GND N/A
12
24 13
4
8
1 5
+12V2
GND
4
8
1 5
+12V2
GND
ere are 3 PCI Express slots on this motherboard.
PCIE slot:
PCIE5 (PCIE 3.0 x16 slot, blue, from CPU 1) is used for PCI Express x16 lane width cards.
PCIE6 (PCIE 3.0 x8 slot, blue, from CPU 1) is used for PCI Express x8 lane width cards.
PCIE3 (PCIE 3.0 x8 slot, white, from CPU 2) is used for PCI Express x8 lane width cards.
Slot Generation Mechanical Electrical Source
PCIE 6 3.0 x8 x8 CPU 1
PCIE 5 3.0 x16 x16 CPU 1
PCIE 3 3.0 x8 x8 CPU 2
PCI Express Slot Conguration
PCIE 5 PCIE 6
Single PCIE Card x16 x0
Two PCIE Cards x8 x8
e PCIE3 slot shares lanes with the Mezzanine Slot (MEZZ1). e PCIE3 slot will be disabled when the
MEZZ1 slot is populated with a mezzanine card.
PCIE 3 MEZZ1
No Mini SAS HD Connector x8
Mini SAS HD Connector Connected x0 Populated
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.