Assa Abloy IKON eCLIQ N110 Operation manual

Please check the
functionality of the
battery regularly!
The key sends signals as soon as it is inserted in the cylinder.
Comment Acoustic signal Optical signal
Normal status – –
Battery nearly depleted,
please replace 3 x long 3 x long green
Locking authorisation OK 1 x short 1 x short
green
No locking authorisation 3 x short 3 x short
red
No locking authorisation.
Key is currently outside
the time zone
3 x short 3 x short
red-green-red
Updating the authorization
(only rele vant in CLIQ Go
systems)
1 x short,
1 x long
1 x short green,
1 x long green
PB00014000170EN_0F
eCLIQ
User information
ASSA ABLOY Sicherheitstechnik GmbH
Attilastraße 61 – 67 • 12105 Berlin
The EU Declaration of Conformity
can be found in the download area of
www.assaabloy.de.
Disposal:
Packaging materials must be recycled. The
product must be disposed of as electronic scrap.
PB0001400170EN_0F_eCLIQ_Benutzerhinw_RZ.indd 1-2 21.08.19 08:42

Dear user,
Thank you for choosing
eCLIQ!
Please note:
1. Your key is a high-quality electronic
product. Please protect it from dust and
wetness.
2. In the event of malfunction due to
wetness, please just wipe off the key.
3.
Due to an energy and data
transmission there is a release
delay of release delay of
approx. 0.1 seconds. This time can be as
much as 0.3 seconds if the battery level
is low.
4. Replace the battery within 30 seconds:
Stored data is kept for 30 seconds.
A new battery must be inserted within
this time span.
5. Battery life:
approx. 30,000 locking operations
within approx. 3 years.
Battery type: CR2032 (LiMn02)
6. B1 key "Beluga" battery life approx.
20,000 locking operations
within approx. 5 years. B2 and B3 keys:
approx. 20,000 locking operations
with approx. 3 years. The battery
cannot be replaced. Please observe
the expiration date provided on the
key. Battery type: CR1/3N (LiMn02)
7. Key ambient temperature:
0 °C to + 70 °C
8. "Beluga" versions: -30 °C to +50 °C
PB0001400170EN_0F_eCLIQ_Benutzerhinw_RZ.indd 3-4 21.08.19 08:42