Assa Abloy shine User manual

shineTM Manual
User guide and installation instructions
The global leader in
door opening solutions

2 3
Product not designed for external use.
Do not use a tool to force the product
onto the glass.
Keep foreign materials away from the
Card Key Sensor to keep it clean and
do not operate it with wet fingers.
Do not attempt to disassemble the
unit yourself. This can cause an electric
shock and damage the product.
Be careful not to let any unauthorised
users discover your PIN Code. Always
keep your PIN Code safe.
Please ensure that the backing sheet
on the adhesive strip is completely
removed before installing.
Any backing paper
remaining will
lessen the adhesive
strength.
When cleaning, do not spray water
directly onto the product or wipe it
with chemicals such as benzene,
thinners or alcohol.
Make sure the door is securely locked
whenever you leave the building,
especially in the manual lock mode.
When used on double opening doors,
the other door must be secured to
the frame/floor.
Important notes
Dry
Cloth
Dry
Cloth
Dry
Cloth
Dry
Cloth
Dry
Cloth
Dry
Cloth
Dry
Cloth
Dry
Cloth
Dry
Cloth
Product features
Advance mode
Advance mode can be used for professional
and high security management.
Choice of access
shineTM has two access solutions, PIN code
or RF Card key for your convenience.
Magic mirror
With the magic mirror feature, the numbers
appear on the mirror finish keypad only
when it is touched. As an additional
security feature, the user is able check
behind them using the mirror, before
keying in the code.
Anti-tamper thumbturn
Opposing buttons on grip of thumbturn
require depressing to allow user to
operate. This security feature prevents
‘fishing’ through the gap to gain
unauthorised entry.
Clip type bracket (no drilling
required)
Quick and easy installation with the clip
bracket. No drilling required and the
bracket is secured with strong double
sided tape.
Modern slim design
Robust, low profile contemporary digital
keypad design
High temperature alarm
In the case of fire, it will detect the increase
in temperature on the inside. The in-built
alarm will then be activiated and the lock
status released automatically.
Fake PIN code
To prevent the PIN code from being exposed,
it allows you to enter fake numbers before
or after entering your PIN Code.
Remote control (optional)
A remote control option is also available.
Using Wireless Floating ID technology, it will
work up to 50 metres.

4 5
Components overview Specifications
Standard contents
• User guide
• Installation template
• 4 x access cards
• Screw pack • Front body • Back body • Magnet for a • Extension • Packer for use on
single door deadbolts 10mm glass thickness
Optional accessory (purchase separately)
• Remote control • Remote control module • Strike for pair of doors
Specifications
Part Specifications Remarks
Front body 14(D) x 72.8(W) x 186(H) Operating temperature :
Back body 48.8(D) x 77.5(W) x 190.5(H) -15 ~ 55ºC
Battery 4EA 1.5 AA alkaline batteries Last up to 1 year
(Operating voltage: 4.5 ~ 6V) Assumes 10 operations a day
The durability will depend on the battery life and the frequency of use.
The colour of the product may change if subjected to direct light for a long period of time and it is not a defect.
Front body Back body
Keypad
Low battery
indicator
Card key reader
Emergency
power supply
terminal
Battery cover
Slot for remote
control module
(optional extra)
Registration
button
Manual
thumbturn
Safe knob
Open/close
button
Deadbolt
Anti-tamper screw

6 7
How to use How to use
Registering a user PIN code
User PIN Code can be set within 4 to 12 digitals. (
*) and (#) are not allowed.
Press ®Enter User PIN Code Press ®
(Registration) button (4 to 12 digits) (Registration) button
Open door with User PIN code
Touch with palm Enter User PIN Code Touch with palm or
(4 to 12 digits) Press (
*) button to end
To use User PIN Code
To use Card Keys
Registering Card Keys*
Press ®Contact all the keys Touch with palm or
you wish to register (Registration) button
on one by one
Open door with Card Key
Hold the card Key to the bottom part of the keypad.
Keep the door open while you register Card Key to prevent yourself from accidentally getting locked out.
*Performing this action will delete all previously saved Card Keys.
Please only use the provided RF Cards in the package for security.
To close door from outside
Step Icon Description
Manual lock status Touch your palm gently onto the keypad to lock the door.
Auto lock status The built-in Auto Lock sensor automatically locks a door within
5 seconds after closing the door.
To close door from inside
Step Icon Description
Manual lock status
Turn the manual thumbturn to unlock pressing buttons together
(the default setting)
Press open / Close button.
Auto lock status The built-in Auto Lock sensor automatically locks a door within
5 seconds after closing the door. (If the magnet is not installed the
auto lock feature cannot be enabled on a single door application).
Lock door
Please ensure the door is secure after closing especially in manual lock mode.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.

8 9
Outside forced lock setting - PIN Code
Touch with palm Enter User PIN Code Enter (#)button for 3 seconds
Forced lock
Outside forced lock setting - Card Key
Contact Card Key for 3 seconds until you hear 3 beeps.
If compulsory external lock is setup, the door open/close button will not function. The alarm will go off if one tries to
open the door through the manual opening/closing unit.
To open the door with the manual opening/closing unit under compulsory external lock setting, one must completely
turn the know within one second. Or else, the door will lock itself again.
Inside forced lock setting
Set
Press the Open / Close button
for 5 seconds
Release
Press the ® Registration button or,
Turn the manual thumb turn to pressing
buttons together
How to use How to use
Auto / Manual locking mode
To set Auto Locking mode
Auto lock setting locks a door in 5 second after the door is closed.
Press ®Enter #button Enter number and Press ®
(Registration) button on the keypad (Registration) button
MUTE
LOW
HIGH
MUTE
LOW
HIGH
It is good practise to ensure the door is secured when closed even in auto locking mode.
To set Manual Locking mode (the default setting)
Page 7 shows how to operate the unit in manual mode.
Press ®Enter #button Enter number and Press ®
(Registration) button on the keypad (Registration) button
MUTE
LOW
HIGH
MUTE
LOW
HIGH
Be careful not to leave the door insecure when in manual lock mode.

10 11
Security and safety features Security and safety features
Alarm features
The alarm sound continues for 30 minutes or until it is reset.
Break-in / Damage Alarm
Break-in : When someone tries to Break-in by opening a door when it is locked, the alarm will Sound.
Damage : When the front body is damaged due to forced separation or drilling, the alarm will Sound.
High Temperature Alarm
• In case of fire, it detects the temperature of the internal unit. It not only sounds an alarm but also releases the
lock status automatically.
• Even when the inside Forced Lock mode is set, the High Temperature Alarm releases the lock status automatically.
Volume setting feature
Setting the volume (the default setting: High)
Press ®Enter #button Press ®
(Registration) button (Registration) button
MUTE
LOW
HIGH
,
,
,
Open / Close button setting feature
To set the Open / Close button
Press ®Enter #button Enter number and Press ®
(Registration) button on the keypad (Registration) button
MUTE
LOW
HIGH
Using the above setting toggles between on/off each time it is used.
When the function is off the open/close internal button will not operate.
10
5
7
10
5
7
3-minute Lock feature
If incorrect security codes or unregistered Card Keys are attempted 5 times in a row, it will lock out for about
3 minutes and the external LED will flash repeatedly.
To release the 3-minute Lock
Press the Open / Close button.
Press the Back Body ®button.
Open with the thumbturn.
Method 1
Method 2
Method 3
Method 1
Method 2
Method 1
Method 2
Method 3
Method 1
Method 2
Method 1
Method 2
Method 3
Method 1
Method 2
To use with Fake PIN Code
This is a security measure to prevent your PIN Code being accidentally exposed. It is only available for your
main user code PIN number and not for the visitor code.
To use with Fake PIN code
Touch with palm Press any button Press PIN Code Touch with palm
Touch with palm Press PIN Code Press any button Touch with palm
Method 1
Method 2
Method 3
Method 1
Method 2
Method 1
Method 2
Method 3
Method 1
Method 2
The 3-minute Lock mode won’t affect any alarm and is sustained even after the product is rebooted.
Once the 3-minute Lock mode is on, the Fake PIN Code will not work until the next normal verification (Card key
verification, User PIN Code, open door from inside). In this case, please open the door with User PIN Code.

12 13
Optional accessory Optional accessory
Remote Control Module
By purchasing the separate Remote Control Module
and the Remote Control the door can be released
from up to 50m.
To install the Remote Control Module
Remove batteries
Open the battery cover
in the back body and
remove all batteries.
MUTE
LOW
HIGH
Install Remote Control Module
Position the module over
the slot below the battery
compartment and carefully
push the module into position
ensuring the pins slide into
position.
10
5
7
Insert batteries
Insert all the batteries,
checking the and
connections.
MUTE
LOW
HIGH
+–
Replace battery cover
Replace battery cover.
The unit will emit a sound
to indicate that it is fully
operational.
10
5
7
Remote Control
MUTE
LOW
HIGH
To register a Remote Control (up to a maximum of 5 remote controls)
Step Icon Description
1Press ®(Registration) Open the battery cover in the back body.
button and #Press ®(Registration) button and then #.
2Enter number and Enter number and on the keypad.
on the keypad
3 Register Remote Press the SET button on the Remote Control
Control (up to 5 Remote Controls).
4Press
®(Registration) Press the ®(Registration) button in the back body again
button to complete the procedure.
MUTE
LOW
HIGH
10
5
7
MUTE
LOW
HIGH
10
5
7
MUTE
LOW
HIGH
10
5
7
MUTE
LOW
HIGH
To remove a Remote Control
Step Icon Description
1Press ®(Registration) Open the battery cover in the back body.
button and #Press ®(Registration) button and then #.
2 Enter number and Enter number and on the keypad.
on the keypad
3Press
®(Registration) Press the ®(Registration) button in the back body again
button and #to complete the procedure.
10
5
7
10
5
7
10
5
7
10
5
7
10
5
7
10
5
7

14 15
Emergency power Installation
Emergency power
By using a 9V battery additional power can be supplied from the outside, should the batteries have lost power.
The battery life will vary depending on temperature, moisture levels,
frequency of use and the quality of the batteries.
MUTE
LOW
HIGH
Emergency power supply for flat batteries
Step Icon Description
1Contact the 9V Connecting the 9V battery will provide temporary power to
alkaline battery operate the device. Press ®(Registration) button and then #.
2Touch with palm
Touch the keypad gently with your palm.
3 Enter User PIN Code Enter each number of User PIN Code.
4Touch with palm Touch the keypad gently with your palm or
or Enter * button or Enter *button to confirm.
MUTE
LOW
HIGH
Battery life
1 Expiry period
The product uses four 1.5V Alkaline AA batteries.
They should last 1 year if used 10 times a day.
(Users are advised to use authentic alkaline batteries.)
2 Low Battery Alarm
You must replace all 4 batteries when the following occurs:
• The Low Battery Lamp on the Front Body lights on
• The alarm melody will sound (a nursery rhyme starting
with ting-a-ling melodies)
Rub the installation surface
with a dry cloth or alcohol.
Remove the release paper
on the installation plate for
the latch and then attach the
plate to the inner side edge.
Installation for double opening doors
Position the product, aligning
the marks on the installation
plate (A) with the edge of the
main body’s U frame (B).
Push latch for double opening
doors onto the plate.
Secure the plate with the 2
securing screws.
Secure the latch with the 4
door latch screws.
If the installation surface is wet, the
adhesive will not be effective. Please
ensure surface is completely dry.
The plate must be attached on the first
attempt - the adhesive strength will
drop thereafter.
Take care not to damage the rubber seal.
When installing the product with the
10mm gasket, you must use the 7mm
black screws.
12 3
4 5 6
AB
AB
When stored at low temperatures, the strength of the adhesive tape drops. Store at room temperature.
After installation check that the doors open and close correctly.
Do not apply excessive force when using the installed product.
Inner side of doors

ASSA ABLOY is the global leader in
door opening solutions, dedicated to
satisfying end-user needs for security,
safety and convenience.
ASSA ABLOY is represented in all
major regions, in both mature and
emerging markets, with leading
positions in Australia, Europe,
North America and the Middle East.
As the world‘s leading lock group,
ASSA ABLOY offers a more complete
product range of door opening
solutions than any other company
on the market.
ASSA ABLOY Security Solutions
School Street
Willenhall
WV13 3PW
Tel: [phone]
Fax: [phone]