Aston Global Langham SDR978 Installation instructions
ON
INSTALLATION AND OWNER'S MANUAL
LANGHAM (SDR978)
Shower Door Model Number: SDR978.00-48-L
05/16 Rev C
P/N :SDR978.00-48-L
Before you start
1
Detailed Diagram of
Shower Door Components
�
12
13
1
2
Sliding Door Track Divider
Fixed Glass Bolt Assembly
2
SUPPLIED HARDWARE
M5x40 2
SCREW PACK M4x40 1
(1) Anchor 3
SCREW PACK M4x40 2
(2) Anchor 2
SCREW PACK M4x40 2
(3)
Anchor ) 2
SUPPLIED PARTS
-
-
3
Installation Guide
l �I
'
4
Preparation of base
for installation of shower tray
5
The shower tray must be installed so that the tile lip is against the wall studs. It is recommended that
the tray is attached to the studs using screws.
6
Left-Handed Shower Tray Installation
Fixed glass Sliding Door
0 0
7
Shower Door Installation
8
Mark the Top Rail Location
0
2
9
10
Top Rail Assembly To Shower
9
14mm,Omm
0 0
8mm 12mm
11
12
Install Wheel Rollers onto the Door
r . J
13
-
Hanging the Door
:
upper roller
assembly
top rail (2)
bottom roller
assembly
14
Install the Door Threshold
X-1¾6"
0½"
15
NOTE: If your surface is prone to cracking or chipping then it is recommended
that you pilot drill first using a smaller drill bit, and then step up to the final size.
16
Installing the door seals
17
Installing the door handle
-
18
Final sealing
19
Table of contents
